Building a Linux-Based High-Performance Compute Cluster
The final interactive screen of the installation sequence (Figure 12) is the disk-partitioning screen. You can partition the disks automatically or manually. If you go with the automatic partitioning scheme, the installation routine sets up the first disk it discovers as follows:
Partition Size / 16GB /var 4GB swap Equal to RAM size on the head node /export (aka /state/partition1) Rest of root disk
If you have multiple disks on the head node or you want to arrange the disk in a different fashion, select Manual Partitioning. This takes you to the standard Red Hat manual partitioning screen where you can configure things any way you desire (you still need to have a 16GB / partition and an /export partition at minimum though). Clicking Next on the disk-partitioning screen begins the automatic portion of the installation (Figures 13, 14 and 15). Once installation is complete, the head node reboots, and you are greeted with your first login screen (Figure 16).
Log on as root, and wait for two or three minutes. This lets the remaining configuration routines finish setting up the cluster in the background. Start a terminal session (Figure 17) to begin installing the compute nodes.
Now you're ready to add nodes to the cluster. The Rocks command that accomplishes this is insert-ethers. It has quite a few options, but for this example, use the main function of inserting nodes into the cluster. After you invoke insert-ethers, you are presented with the screen shown in Figure 18.
Rocks treats everything that can be connected to the network as an appliance. If it can respond to a command over the network, it's an appliance. For this simple example with a dumb switch, the only things you need to worry about are the compute nodes themselves. Because Compute is already selected, tab to the OK button and press Enter. This brings up the empty list that will be filled with the names and MAC addresses of the nodes as they are added (Figure 19).
Now it's time to boot the first compute node. If you have wiped the disk, most systems will start a PXE boot from the network as a default action. If you have a KVM switch and can watch the console on the compute node, you should see the PXE boot begin. When the compute node asks for an address for eth0, you will see the MAC address entered in the Inserted Appliances list on the head node (Figure 20).
The insert-ethers routine displays the MAC address it has received and the node name it has assigned that node. The ( ) will be filled in with an asterisk (*) when the compute node begins downloading its image (Figure 21).
- Three EU Industries That Need HPC Now
- Chemistry on the Desktop
- Five HPC Cost Considerations to Maximize ROI
- FinTech and SAP HANA
- HOSTING Monitoring Insights
- Preseeding Full Disk Encryption
- William Rothwell and Nick Garner's Certified Ethical Hacker Complete Video Course (Pearson IT Certification)
- Two Factors Are Better Than One
- GRUB Boot from ISO
- Two Ways GDPR Will Change Your Data Storage Solution