Virtualize a Server with Minimal Downtime
You don't have to look far in tech news to see that virtualization has become a big deal. After all, computers continue to become faster and more powerful, and as they do, the services that run on them often use fewer overall resources. On top of that, modern servers often need a fraction of their predecessors' power and cooling. With virtualization, you can get power savings and more efficient use of server resources, and you can create servers quickly without waiting on parts to arrive.
Although some people start from a clean slate and create brand-new virtual servers from scratch to replace old physical machines, you simply may not have the extra time to invest to make the clean break to new versions of Linux with all-new packages. In many cases, it makes more sense to create a virtual clone of a physical server and keep all the files and services identical. If you want to go this route, there are a number of different methods you can use if you can handle unlimited downtime, but if you want to keep downtime and overall disruption to a minimum (and who doesn't?), there is a fairly simple process I've used to migrate a large number of servers to virtual machines with around 30 minutes of average downtime—well within most acceptable maintenance windows.
Before I get into the actual steps, there are some limitations to this approach that I should mention. First, this method has been designed and tested to work with VMware virtualization, specifically with its enterprise server products (although it would also work fine with their free server product). VMware works well for this process because it doesn't require that I modify my current Linux kernel to virtualize it—something that isn't always possible when you want to virtualize an old server. Having said that, these steps also could work with other virtual machine technologies that can use an unmodified Linux kernel. Second, this procedure has been tested with and is aimed at Red Hat-like distributions (Red Hat, CentOS and so on), but with a few tweaks I discuss later, it also could work with other distribution flavors. Finally, the actual amount of downtime you will need for this process probably will vary from my results, especially as you first test out each of the steps. Servers with large or slow disks and, specifically, servers that change large amounts of data frequently possibly will take longer to sync.
Along with these disclaimers, it's only fair to point out some of the benefits to this method:
You can do a majority of the migration work against a live server.
Standard Linux tools are used for the synchronization and other changes.
The process protects your network from both servers showing up at the same time.
You safely can leave the old server on the network and access its files while users use the new virtual machine.
Now that the disclaimers are out of the way, let me summarize the process in a few general steps. First, create a fresh virtual machine to replace the physical host. Then, boot in to the virtual machine with a rescue CD and partition the disk. Next, perform the main synchronization of files from the live physical server to the new virtual machine. Take down your physical machine and reboot in to a rescue CD, and perform a final synchronization from the off-line server. After that, change the boot settings on the virtual machine to suit its new environment, and then reboot in to your new virtual machine.
To get started, first you must create a virtual machine container to replace your physical machine. Specific steps are different if you use VMware Server versus Virtual Infrastructure 3, but ultimately, what you want to do is to create a machine that mostly matches your physical machine's specifications. The specifications don't have to match exactly, and there actually are good reasons why you might want to tweak the settings a bit. For instance, if your server has 2GB of RAM, but you notice that it really needs only 1GB, now would be a good opportunity to change it. If your server is starting to run out of storage, this is a good time to increase it. If your physical server has a 32-bit or 64-bit processor, however, make sure the virtual machine matches. Also, be sure that you match the operating system version you report to VMware with your actual OS if possible. For instance, if your server runs RHEL 3, don't tell VMware that it runs RHEL 4. You want to ensure that the OS will have drivers for the virtual devices that VMware presents, specifically for the disk subsystem. For instance, I've had numerous headaches due to RHEL 4's removal of the BusLogic SCSI module from the base OS (a virtual SCSI device that is a commonly used by VMware along with an LSI Logic virtual SCSI device).
After you set the specs for the virtual machine, edit the CD-ROM device so that it points either to an actual rescue CD in the VMware server or to an ISO. I prefer Knoppix for this procedure, but any live CD should work as long as it has the rsync and chroot tools, an SSH server and enough module support to access the disks on both the physical machine and the virtual machine. Now, boot the virtual machine into the rescue CD. Everything you need to do is done via the command line, so under Knoppix, type knoppix 2 at the boot: prompt to bypass the GUI and go straight to a command line.
Kyle Rankin is a VP of engineering operations at Final, Inc., the author of a number of books including DevOps Troubleshooting and The Official Ubuntu Server Book, and is a columnist for Linux Journal. Follow him @kylerankin.
|Happy Birthday Linux||Aug 25, 2016|
|ContainerCon Vendors Offer Flexible Solutions for Managing All Your New Micro-VMs||Aug 24, 2016|
|Updates from LinuxCon and ContainerCon, Toronto, August 2016||Aug 23, 2016|
|NVMe over Fabrics Support Coming to the Linux 4.8 Kernel||Aug 22, 2016|
|What I Wish I’d Known When I Was an Embedded Linux Newbie||Aug 18, 2016|
|Pandas||Aug 17, 2016|
- Download "Linux Management with Red Hat Satellite: Measuring Business Impact and ROI"
- Happy Birthday Linux
- Updates from LinuxCon and ContainerCon, Toronto, August 2016
- ContainerCon Vendors Offer Flexible Solutions for Managing All Your New Micro-VMs
- New Version of GParted
- What I Wish I’d Known When I Was an Embedded Linux Newbie
- Tor 0.2.8.6 Is Released
- NVMe over Fabrics Support Coming to the Linux 4.8 Kernel
- Blender for Visual Effects
- All about printf