System Administration: Another Step toward the BIND - IV
In this session we're going to look at a zone file listed in our named.conf file.
So let's look at pri.example.org. Notice the a CNAME and SPF files. We didn't list those in our file types in part III, but we'll demonstrate what they do in the next session.
Here's our zone file:
@ IN SOA server1.example.org. root.localhost. ( 2006012103; serial 28800; refresh, seconds 7200; retry, seconds 604800; expire, seconds 86400 ); minimum, seconds ; NS server1.example.org.; NS server2.example.org. ; ; MX 10 server1.example.org. ; example.org. A 22.214.171.124 www A 126.96.36.199 server1 A 188.8.131.52 server2 A 184.108.40.206 ftp CNAME www example.org. TXT "v=spf1 a mx ~all" server1.example.org. TXT "v=spf1 a -all"
The first line in our zone file looks like this:
@ IN SOA server1.example.org. root.localhost. (
The "@" sign in the line refers to the "origin" for this zone file which is server1.example.org. DNS uses this as simply a label to designate the Start Of Authority (SOA) record that appears at the beginning of any zone file defining a domain. Don't make too much out of this. If you read much about DNS, then you will see people using this strange term "current origin". Few people explain what that means. It's just another bit of jargon.
The next item on the line "IN" stands for Internet. People call this a class field. Three classes exist including "HS" for Hesiod servers and "CH" which stands for Chaosnet servers.
You will only see Internet servers, but if you sweat the small stuff then you might want to know that HS and CH protocols barely exist. These are old typologies dating back to the 1970s. If you ever use them, it might be in a laboratory in a far off corner with some lab rats.
IETF RFC 1035, Domain Names - Implementation and Specification says:
The SOA record stores information about the name of the server that supplied the data for the zone; the administrator of the zone; the current version of the data file [serial number]; the number of seconds a secondary name server should wait before checking for updates; the number of seconds a secondary name server should wait before retrying a failed zone transfer; the maximum number of seconds that a secondary name server can use data before it must either be refreshed or expire; and a default number of seconds for the time-to-live file on resource records.
What's next? The mailing address of the administrator in this file is root@localhost. Obviously, my mail server delivers local mail so messages related to this process will go to root's mailbox.
In case you missed it, the first line is only part of the SOA record. It has additional fields. Notice the "(" at the end of the line. Here's the rest of the record. Remember these exist for the benefit of the slave server.
2006012103; serial 28800; refresh, seconds 7200; retry, seconds 604800; expire, seconds 86400 ); minimum, seconds
The serial number is the only field in the record that does not refer to seconds.
The remaining fields use seconds to denote their values. For example, the number of seconds a secondary name server should wait before checking for updates is in the refresh record. 28800 seconds is 480 minutes or 8 hours.
Also notice that the SOA record ends at the end of the Minimum-Time to Live (TTL). You can see the ")" symbol which closes the record values.
Next we write our NS records. This record specifies the name servers that are responsible for our domain. You can list as many as you want even though two are used by convention.
NS server1.example.org.; NS server2.example.org. ;
Please note: the semicolon (';') does not mark the end of a line; instead it marks the beginning of a comment in a zone file. You can write
NS server1.example.org.; This is my primary name server.
However, if you do not have any comments, you can as well write:
In the next session, we'll analyze the remainder of the zone file. For now, you might want to take a bit of a breather.
|PostgreSQL, the NoSQL Database||Jan 29, 2015|
|HPC Cluster Grant Accepting Applications!||Jan 28, 2015|
|Sharing Admin Privileges for Many Hosts Securely||Jan 28, 2015|
|Red Hat Enterprise Linux 7.1 beta available on IBM Power Platform||Jan 23, 2015|
|Designing with Linux||Jan 22, 2015|
|Wondershaper—QOS in a Pinch||Jan 21, 2015|
- PostgreSQL, the NoSQL Database
- Sharing Admin Privileges for Many Hosts Securely
- HPC Cluster Grant Accepting Applications!
- Designing with Linux
- Wondershaper—QOS in a Pinch
- January 2015 Issue of Linux Journal: Security
- Internet of Things Blows Away CES, and it May Be Hunting for YOU Next
- Ideal Backups with zbackup
- Red Hat Enterprise Linux 7.1 beta available on IBM Power Platform
- Slow System? iotop Is Your Friend
Editorial Advisory Panel
Thank you to our 2014 Editorial Advisors!
- Jeff Parent
- Brad Baillio
- Nick Baronian
- Steve Case
- Chadalavada Kalyana
- Caleb Cullen
- Keir Davis
- Michael Eager
- Nick Faltys
- Dennis Frey
- Philip Jacob
- Jay Kruizenga
- Steve Marquez
- Dave McAllister
- Craig Oda
- Mike Roberts
- Chris Stark
- Patrick Swartz
- David Lynch
- Alicia Gibb
- Thomas Quinlan
- Carson McDonald
- Kristen Shoemaker
- Charnell Luchich
- James Walker
- Victor Gregorio
- Hari Boukis
- Brian Conner
- David Lane