Hack and / - Dr hjkl Meets the Vimperator
In November 2009, I wrote an entire column (“Dr hjkl and Mr Hack”) devoted to programs with vi-style keybindings. In the column, I introduced the Vimperator plugin for Firefox and discussed how it worked, but at the time, I mentioned, “The Vimperator plugin is extensive enough to deserve a column of its own (in fact, e-mail me at firstname.lastname@example.org if you'd be interested in that.)” Well, I received a number of responses, so between that and my love for all things with vi keybindings, I think it's worth giving the Vimperator plugin the full column it deserves.
As I mentioned in my previous column, the main reason I love vi-style keybindings is that they keep your fingers on the home row (the asdfghjkl; row on your keyboard)—something quite important if you touch type. Once you get used to using hjkl to navigate documents, it and the rest of the keybindings become second nature. If you touch type with any decent speed, you realize how much it slows you down to reach for the mouse or even the arrow keys—particularly for something simple like clicking a link. Now, most Web browsers have some limited way to browse a page with a keyboard, but they almost always use the arrow and Page Up and Page Down keys, all of which are pretty far from the home row.
In the past, I've used a number of methods to add some level of vi-style keybindings to Firefox. At first, I used a custom configuration to my Firefox config, and later, I used the mozless extension. Both worked okay, at least for certain versions of Firefox, but they still were a limited version of the real thing. Well, the Vimperator plugin is the real deal. It goes far beyond simple keybindings and actually creates a modal interface with an incredible level of detail. You not only get hjkl navigation, but you also can open tabs and even record macros just like in vim. What's more, Vimperator was built with Web page navigation in mind, so there are keybindings available to make it easy to click on links and even hover over elements on the page—all from the keyboard.
The first step is to install the Vimperator plugin. Visit vimperator.org, click on the Download Vimperator button on the page, and go through the typical Firefox plugin installation process. Once you start Firefox again, the first thing you will notice is that your menu bar is gone (Figure 1)! Now, this might be fine once you get accustomed to Vimperator, but I found it a little jarring at first, so you might want to type :set guioptions+=mT to turn the menu bars back on for now. Notice that as with vim, you press the : key to enter command-line mode. Vimperator turns Firefox into a modal browser like vim that has a command-line mode (accessed when you press the : key) as well as a normal and insert mode. Also as with vim, when you get stuck in some strange mode, you generally can just press Esc a few times to get back to normal. If you find you want the menu bar back permanently, add the following to your ~/.vimperatorrc file:
This file acts like ~/.vimrc, so you can add any other Vimperator-specific settings here as well.
The basic navigation with Vimperator should be pretty familiar to you if you've ever used vim before, but in case you are still new to that kind of navigation, here's a quick list of keybindings:
h — scroll left.
j — scroll down one line.
k — scroll up one line.
l — scroll right.
gg — move to the top of the page.
G — move to the bottom of the page.
/ — enter search mode.
n — move to the next match in your search.
N — move to the previous match.
Spacebar — move down one page.
Shift-spacebar — move up one page.
Esc — go back to standard navigation mode.
F1 — show Vimperator help.
So for instance, if I wanted to use Vimperator to search for “Sarah Conner”, I would press /, type in Sarah Conner and press Enter. Vimperator would jump to the first instance on the page. If the first Sarah Conner wasn't the right match, I would press n to move to the next match or N to go back to the previous match. If I wanted to start a new search from the top of the page, I could type gg to move back to the top, then / to enter search mode, and then type, for instance, “John Conner” and press Enter.
As with vim, you also can add numerical modifiers to any of these commands, so if you want to move down five lines instead of just one, you can press 5j. If you forget the keybinding for a particular function, just press F1 or type :help to see the full Vimperator help screen.
Vimperator would be useful even if it provided only the standard navigation keys, but it also adds a complete set of keys to access standard browsing functions. Here is a list of some of the standard ones:
H — go back in the current tab's history.
L — go forward in the current tab's history.
gt — go to the next tab.
gT — go to the previous tab.
d — close the current tab.
u — undo: open a previously closed tab (works with multiple previously closed tabs).
r — reload the current page.
R — reload the current page without the local cache.
Now, I've found that when I use tools like S5 for Web-based presentations, the keybindings it expects conflict with Vimperator. Luckily, Vimperator makes it easy to disable its keys temporarily. Simply press Ctrl-z, and all keybindings will go back to standard Firefox mode until you press Esc. I also use this mode when I browse Google Reader, because it already accepts vi-style key bindings to browse through RSS feeds. If you just need to enter one key that Vimperator won't intercept, you can press Ctrl-v, and after you press the key, Vimperator will go back to its normal mode.
Once you have the standard movement down, you might wonder, how do I actually open a new URL without a menu bar? Either press o (or type :open) followed by the URL you want to open to load that URL in your current tab, or press t (or type :tabopen) to type in a URL to open in a new tab. In addition to these basic keys, there also are a number of variations to them:
T — open a :tabopen prompt, but fill in the URL with the URL of your current tab.
O — create an :open prompt, but fill in the URL with the URL of your current tab.
w — like :tabopen but only opens the URL in a new window.
W — like T, it creates a :winopen prompt and fills out the URL with the URL in the current tab.
p — open a URL based on the contents of the clipboard.
Once you type in a URL, you also can press the Tab key to trigger Tab-complete based on your browser history. Speaking of browser history, you still can access that and the other standard Firefox functions from command-line mode:
:bmarks — access all of your Firefox bookmarks in command-line mode.
:history — view your browser history.
:emenu — access functions in the standard Firefox menu.
:dialog — access other Firefox dialog windows; type :help :dialog for more information.
Kyle Rankin is a VP of engineering operations at Final, Inc., the author of a number of books including DevOps Troubleshooting and The Official Ubuntu Server Book, and is a columnist for Linux Journal. Follow him @kylerankin.
Practical Task Scheduling Deployment
One of the best things about the UNIX environment (aside from being stable and efficient) is the vast array of software tools available to help you do your job. Traditionally, a UNIX tool does only one thing, but does that one thing very well. For example, grep is very easy to use and can search vast amounts of data quickly. The find tool can find a particular file or files based on all kinds of criteria. It's pretty easy to string these tools together to build even more powerful tools, such as a tool that finds all of the .log files in the /home directory and searches each one for a particular entry. This erector-set mentality allows UNIX system administrators to seem to always have the right tool for the job.
Cron traditionally has been considered another such a tool for job scheduling, but is it enough? This webinar considers that very question. The first part builds on a previous Geek Guide, Beyond Cron, and briefly describes how to know when it might be time to consider upgrading your job scheduling infrastructure. The second part presents an actual planning and implementation framework.
Join Linux Journal's Mike Diehl and Pat Cameron of Help Systems.
Free to Linux Journal readers.View Now!
|The Firebird Project's Firebird Relational Database||Jul 29, 2016|
|Stunnel Security for Oracle||Jul 28, 2016|
|SUSE LLC's SUSE Manager||Jul 21, 2016|
|My +1 Sword of Productivity||Jul 20, 2016|
|Non-Linux FOSS: Caffeine!||Jul 19, 2016|
|Murat Yener and Onur Dundar's Expert Android Studio (Wrox)||Jul 18, 2016|
- Stunnel Security for Oracle
- The Firebird Project's Firebird Relational Database
- Murat Yener and Onur Dundar's Expert Android Studio (Wrox)
- SUSE LLC's SUSE Manager
- Managing Linux Using Puppet
- My +1 Sword of Productivity
- Non-Linux FOSS: Caffeine!
- Doing for User Space What We Did for Kernel Space
- SuperTuxKart 0.9.2 Released
- Google's SwiftShader Released
With all the industry talk about the benefits of Linux on Power and all the performance advantages offered by its open architecture, you may be considering a move in that direction. If you are thinking about analytics, big data and cloud computing, you would be right to evaluate Power. The idea of using commodity x86 hardware and replacing it every three years is an outdated cost model. It doesn’t consider the total cost of ownership, and it doesn’t consider the advantage of real processing power, high-availability and multithreading like a demon.
This ebook takes a look at some of the practical applications of the Linux on Power platform and ways you might bring all the performance power of this open architecture to bear for your organization. There are no smoke and mirrors here—just hard, cold, empirical evidence provided by independent sources. I also consider some innovative ways Linux on Power will be used in the future.Get the Guide