Backups to the Future: Eliminate Tape Backups with FreeNAS and Bacula
Backups in today's environment are in a state of flux. Tapes have been the mainstay of most organizations for years—and in some cases, decades. However, as the cost of hard drives decreases and their capacity increases, conventional wisdom about backups and tapes is changing. Although tapes still prove useful for archiving and offsite storage, inexpensive disk-based technology slowly is creeping into areas that tape has traditionally dominated.
Many enterprises find it's just as easy and reliable to back up data over their network to near-line storage, such as a Storage Area Network (SAN) or Network-Attached Storage (NAS), instead of tape. Also sometimes referred to as disk-to-disk (D2D) backups, the benefits of near-line storage are many—especially speed and capacity. When deciding to go near line, you really have only two choices: SAN or NAS. Of the two, NAS is more cost-practical for most shops. In this article, I explain how to implement a near-line backup to a NAS to illustrate how easy it is to begin the transition from tapes to disks.
I've chosen two programs for reaching the goal of a tapeless backup: FreeNAS (to create a networked storage area for backup files) and Bacula (to automate backups and provide a pseudo-daily, weekly and monthly rotation).
To keep things simple, let's build two systems, one running FreeNAS and one running Bacula on top of Fedora 8. All configuration done on the Bacula system for this article was performed as root, but it also could be done with sudo. Bear in mind, the options covered in both programs here represent only a handful of their full capabilities.
FreeNAS is one of the simplest programs I have ever deployed. It's small enough to run a system from a CD or USB key. However, for this example, let's install it on our server to the local hard disk. On your system, I suggest at least 256MB of memory and SATA drives for decent performance. If you want to use RAID on your drives, use hardware-based solutions. They are faster, and there have been issues with the built-in software RAID capabilities of FreeNAS. If you opt to use hardware RAID, check the FreeBSD hardware compatibility list, on which FreeNAS is based, before making a purchase.
Download the latest ISO from the FreeNAS site, and burn it to CD (version .684b at the time of this writing). Boot the system from CD, and when you come to the options menu (Figure 1), select option 7 to install the server image to a local hard disk. Next, select option 2 to create two UFS partitions. UFS is the native filesystem in FreeNAS, and as we plan to access our data on the disk via a networked protocol (NFS), any system should connect to it. Select these options to create a small partition for the server software, and use the rest of the space for a second data partition. When prompted, enter the name of the CD drive (acd0 in my install), and then enter the destination drive (da0). When the install routine is complete, enter 3 at the prompt to return to the main menu, and then enter 1 to assign an interface. Accept the default interface, and give it an IP address (unless you are using DHCP). Once assigned, return to the main menu, and reboot the machine. Remove the CD, and the system now should boot from the system partition on the disk.
Once the system is back up, open a Web browser from another system, and enter the IP of the FreeNAS machine as the URL to access the management site. At the prompt, enter admin as the user name and freenas as the password. From this management site, you can change a multitude of settings, but for now, we need to change only our hostname (Figure 2), mount the auto-created DATA partition and enable NFS.
Click the Management link under the Disks section of the Web page. You should see a message saying that you need to add your hard drive to the disk list. Click the + icon to add it (Figure 3). Leave all the options at their defaults, except PreFormatted FS. Set this to UFS, as FreeNAS already has done the work for us. Once you click the Apply Changes button, the status column of your disk will change to ONLINE.
Now click the Mount Point link, and click the + icon again on this page to edit the Mount Point properties (Figure 4). From this screen, change the partition to 2, as partition 1 is the system partition, which cannot be used. Leave the File System as UFS, and enter DATA as the share name. Click Add when finished. This takes you back to the original Mount Point page. Click Apply Changes.
Under the Services links, click NFS. Check the Enable box to turn NFS on, and type your network address range in CIDR notation. Click the Save button, and your NAS build is complete.
- Readers' Choice Awards 2013
- December 2013 Issue of Linux Journal: Readers' Choice
- IBM Will Minimize Impact of Future Disasters
- Raspberry Pi: the Perfect Home Server
- Sublime Text: One Editor to Rule Them All?
- RSS Feeds
- Linux Systems Administrator
- Tech Tip: Really Simple HTTP Server with Python
- Senior Perl Developer
- Technical Support Rep
- Reply to comment | Linux Journal
6 hours 2 min ago
- It's Jupiter
7 hours 2 min ago
- GIMP is certainly a graphic
8 hours 4 min ago
- Thanks For Your Sharing
12 hours 50 min ago
- Studying linux, and looking
16 hours 15 min ago
- voting for Best Linux Distribution
1 day 42 min ago
- tizen vs android
1 day 4 hours ago
- i switch my choice from KDE
1 day 5 hours ago
1 day 8 hours ago
- Belanja Online
1 day 10 hours ago