The Interoperability Power of Linux-NTFS Tools
At this point, it is assumed that you have either installed ntfsprogs or have discovered it already installed on your system.
If you have already looked at the ntfsprogs man page, you have seen the complete list of the utilities. Here is that part of the output from the man page:
mkntfs(8) - Format a partition using NTFS. ntfscat(8) - Dump a file's contents to the standard output. ntfsclone(8) - Efficiently clone, create, restore or rescue an image of an NTFS partition. ntfscluster(8) - Locate the owner of any given sector or cluster on an NTFS partition. ntfscp(8) - Overwrite file on an NTFS partition. ntfsfix(8) - Check and fix some common errors, clear the LogFile and make Windows perform a thorough check next time it boots. ntfsinfo(8) - Show some information about an NTFS partition or one of the files or directories within it. ntfslabel(8) - Show, or set, an NTFS partition's volume label. ntfsls(8) - List information about files in a directory residing on an NTFS partition. ntfsmount(8) - NTFS module for FUSE. ntfsresize(8) - Resize an NTFS partition without losing data. ntfsundelete(8) - Recover deleted files from an NTFS partition.
Many of the utilities listed are more useful to developers than to people doing maintenance on a network or dual-boot computer. However, some of these are real life-savers, and ntfsclone is the biggest life-saver of all.
In order to try out ntfsclone, you need a computer with the NT filesystem to clone, and it needs to have access to another filesystem large enough to store the image. Recommended filesystems are ext2, ext3, xfs or ReiserFS. The documentation for ntfsclone warns that the ReiserFS is slow when handling sparse files, but I have found the performance to be okay with more recent versions. It is possible to to use an external drive, as long as it has the ability to store huge files—for some operations you will need space as large as your entire Windows partition. If you have an external drive formatted as a FAT32 filesystem, it will have a size limit for individual files that is too small for what you need. Of course, if your computer does not have Linux installed, you will need to boot from a live Linux CD, such as Knoppix.
Notice that the description of the ntfsclone utility above claims that it does its job “efficiently”. This is not merely a boast. On newer hardware, it can clone a substantial Windows XP workstation in just a couple of minutes. If you had an NT filesystem on the first partition of the first IDE drive and were operating from Linux on the same computer, the following command would back up the NTFS as a single file:
ntfsclone /dev/hda1 -O /usr/local/backup/ntfs.img
The uppercase O in this command tells the software to overwrite the image, but it will create the file if it is absent. This will not compress the filesystem. In fact, it will leave it in a state to allow you to mount ntfs.img using loopback. First, make a mountpoint:
Then, use ntfsmount and the same syntax you would use for an ordinary mount:
ntfsmount -o loop /usr/local/backup/ntfs.img \ /usr/local/backup/mtpt/
The ntfsmount command mounts the filesystem read/write by default. Files can be copied, moved and deleted easily. Of course, there are the usual cross-platform perils to contend with. For example, situations involving configuration files can require caution when alien line endings and character sets are involved.
Using the the native mount command with the native driver involves the same familiar syntax:
mount -o rw,loop,nls=utf8 -t ntfs \ /usr/local/backup/ntfs.img \ /usr/local/backup/mtpt/
Note that this mount also makes a provision for a Windows-compatible character set. You still need to use caution, finesse and expertise, however, if you were to choose to edit, say, boot.ini with Emacs. It would be better to edit such a file in a Windows environment or perhaps with Notepad running through Wine.
If you want read/write access, your success with this last mounting method might vary according to the version of your kernel. Again, the native driver is a bit finicky. It may complain, and if it does, its usual behavior is to fall back to a mount that is read-only. Older versions of the native driver are outright dangerous in read/write mode.
Unmount the filesystem the same way for both methods. From the directory containing the mountpoint do the following:
The ntfs.img file can be moved and copied just like any other (admittedly huge) file. It can be compressed and stored in a safe place. It can be uploaded to remote locations. A copy can be edited and then restored over the original. The command for restoring this backup onto the original partition (while in the directory containing the backup) is as follows:
ntfsclone ntfs.img -O /dev/hda1
Sometimes, smaller is better. The ntfsclone command will take flags that allow your image to be compressed efficiently. These flags also make the process of cloning much faster, both from the local hard drive and over the network. Here is one example, where the image is saved much the way it was in the first example:
ntfsclone --save-image /dev/hda1 -O \ /usr/local/backup/ntfs.img
This image, alas, cannot be mounted unless it is restored, either to its original partition or to a different file. Restoring to its original partition would happen as follows:
ntfsclone --restore-image --overwrite /dev/hda1 \ /usr/local/backup/ntfs.img
Note that in the above, the -O has been replaced by the more script-friendly --overwrite flag. They do the same job. All flags can be expressed as script-friendly words (for readers of English), and most can be expressed as single letters.
Now comes the good part. The ntfsclone utility will send its data to standard output. This means you have your choice of various compression utilities, different modes of transfer over the network and so forth. Any useful tool that accepts standard input could process the image. Here are some examples.
To back up a compressed image, do:
ntfsclone --save-image --output - /dev/hda1 | gzip \ -c >ntfs.img.gz
The image is sent to standard output by the -output flag with the argument of a single dash. The gzip utility compresses it, then redirects the stream to overwrite or create the file ntfs.img.gz.
To back up the image to a remote computer, do:
ntfsclone --save-image -o - /dev/hda1 | ssh \ email@example.com \ "dd of/home/backups/windows/images/ntfs.img"
Here, the flag for --output is shortened to its single-letter abbreviation. It is sent to standard output. This, in turn, is piped into the ssh program. The stream is sent over the network to a computer named storage under the care of a user named backups and stored in its proper place through the dd command.
Here is another example:
wget ftp://storage.mydomain.org/home/backups/ ↪windows/images/ntfs.img.gz \ -O - | gunzip | tee /usr/local/backup/ntfs.img | \ ntfsclone --restore-image --overwrite /dev/hda1 -
This could be a line taken directly from a cloning script, because it needs no password or other user input. It uses wget to download the compressed image, uses gunzip to unzip it, and then splits the data stream with the tee command, so that a backup copy of the image is stored in the Linux partition at the same time that it is redirected to the NT partition on /dev/hda1. This assumes that storage.mydomain.org has a functioning anonymous FTP dæmon. Other possible ways of downloading without user input would be to use wget with Apache or to set up encryption keys to use with SSH. Again the possibilities are limited only by the incredible number of tools available.
Another useful tool in the ntfsprogs package is ntfsresize. This does exactly what it advertises. It shrinks or expands an NT filesystem. It operates on filesystems occupying partitions, but it also resizes filesystems that have been stored as single files by ntfsclone.
Note that ntfsresize doesn't change partition tables, it changes only the NT filesystem inside the partition. Changing the partition table is a job for fdisk or sfdisk.
This article does not cover how to partition a disk. A detailed and cautious description of how to free space on a drive occupied entirely by a single NT filesystem could take an article at least as long as this one. The operation itself doesn't take long, but it is a bit dangerous. Carelessness, or even bad luck, could result in a computer that refuses to boot. Given this, and given that the workaround of an extra hard drive costs almost the same as a tank of gas, this article continues to assume that partitioning already has been done.
Suppose, however, that the NT partition is just a little too small for the NT filesystem. This can happen, for example, if you don't account for the need of most partitioning tools to round down to a nearby sector, or if you replaced a defective drive with one having the same advertised size but with a different geometry.
The ntfsclone utility will work just fine on a partition that is too big, but it refuses to fit into a space that is even the slightest bit too small.
In that case, the ntfsresize tool can come to the rescue. To figure out how much space you could shrink out of your NT filesystem, type the command that follows (from the directory containing ntfs.img):
ntfsresize --info ntfs.img
The software will report something like the following:
ntfsresize v1.11.2 Device name : ntfs.img NTFS volume version: 3.1 Cluster size : 4096 bytes Current volume size: 90009203200 bytes (90010 MB) Current device size: 90009203200 bytes (90010 MB) Checking filesystem consistency ... 100.00 percent completed Accounting clusters ... Space in use : 6508 MB (7.2%) Collecting resizing constraints ... You might resize at 6507421696 bytes or 6508 MB (freeing 83502 MB). Please make a test run using both the -n and -s options before real resizing!
This reports that you could shrink your filesystem down to as little as 6,508MB. Windows probably wouldn't run if you reduced it to the minimum size; it would be smart to leave a little room for future growth anyway. Note that the software advises that you could make a “test run using both the -n and -s options”. Instead, you simply could keep a backup copy in a safe place in case something goes wrong. Or, you could do both. Shrinking the filesystem to 10,000MB requires the following command:
ntfsresize --size=10000M ntfs.img
This produces a great deal of feedback, including the following:
100.00 percent completed Updating $BadClust file ... Updating $Bitmap file ... Updating Boot record ... Syncing device ... Successfully resized NTFS on device 'ntfs.img'.
This should create an NT filesystem small enough to fit into its designated partition.
|Using Salt Stack and Vagrant for Drupal Development||May 20, 2013|
|Making Linux and Android Get Along (It's Not as Hard as It Sounds)||May 16, 2013|
|Drupal Is a Framework: Why Everyone Needs to Understand This||May 15, 2013|
|Home, My Backup Data Center||May 13, 2013|
|Non-Linux FOSS: Seashore||May 10, 2013|
|Trying to Tame the Tablet||May 08, 2013|
- RSS Feeds
- Making Linux and Android Get Along (It's Not as Hard as It Sounds)
- New Products
- Drupal Is a Framework: Why Everyone Needs to Understand This
- A Topic for Discussion - Open Source Feature-Richness?
- Home, My Backup Data Center
- Validate an E-Mail Address with PHP, the Right Way
- Tech Tip: Really Simple HTTP Server with Python
- Trying to Tame the Tablet
- New Products
- Ahh, the Koolaid.
4 min 31 sec ago
- git-annex assistant
6 hours 4 min ago
- direct cable connection
6 hours 26 min ago
- Agreed on AirDroid. With my
6 hours 36 min ago
- I just learned this
6 hours 41 min ago
7 hours 11 min ago
- not living upto the mobile revolution
10 hours 2 min ago
- Deceptive Advertising and
10 hours 38 min ago
- Let\'s declare that you have
10 hours 38 min ago
- Alterations in Contest Due
10 hours 40 min ago
Enter to Win an Adafruit Prototyping Pi Plate Kit for Raspberry Pi
It's Raspberry Pi month at Linux Journal. Each week in May, Adafruit will be giving away a Pi-related prize to a lucky, randomly drawn LJ reader. Winners will be announced weekly.
Fill out the fields below to enter to win this week's prize-- a Prototyping Pi Plate Kit for Raspberry Pi.
Congratulations to our winners so far:
- 5-8-13, Pi Starter Pack: Jack Davis
- 5-15-13, Pi Model B 512MB RAM: Patrick Dunn
- Next winner announced on 5-21-13!
Free Webinar: Linux Backup and Recovery
Most companies incorporate backup procedures for critical data, which can be restored quickly if a loss occurs. However, fewer companies are prepared for catastrophic system failures, in which they lose all data, the entire operating system, applications, settings, patches and more, reducing their system(s) to “bare metal.” After all, before data can be restored to a system, there must be a system to restore it to.
In this one hour webinar, learn how to enhance your existing backup strategies for better disaster recovery preparedness using Storix System Backup Administrator (SBAdmin), a highly flexible bare-metal recovery solution for UNIX and Linux systems.