Work the Shell - End Game

Want to bet you can find a problem in our final Blackjack script?

This is the last column in our Blackjack series, and in this column, I show the final snippets of code needed to weave all of the disparate pieces of the game script into a playable game. For obvious reasons, I can't present the entire script here in the magazine (it's almost 300 lines long), so instead I highly encourage you to pop over to the Linux Journal FTP site and grab a copy of the script as you read along (ftp.linuxjournal.com/pub/lj/listings/issue148/9051.tgz).

As with many betting games, Blackjack has evolved to have many esoteric rules with splitting pairs, insurance and various other things that take something relatively simple and make it more complex. We'll ignore all of that, however, and also ignore the betting component of the game too (this is a [geek] family magazine, after all) and just focus on the game play.

Dealer Gets One Card Up

Therefore, the first thing we need to know is that the player can see both cards as dealt and one of the two cards that the dealer deals for itself. That's the first piece of code we need to add, and because we aren't allowing insurance or betting, it needs to be included immediately after the tests for blackjack in the code:

echo -n "** Dealer's hand: "
showCard ${dealer[1]} ; echo -n "$cardname, "
echo "(card face down)"
echo ""

From a strategic perspective, if you have even a rudimentary grasp of probability, you'll know that cards with a value of ten are far more likely than any other card value in the deck. If the dealer has an eight or nine showing, for example, odds are very good that it has 18 or 19 as a hand value. That'll, therefore, change your own playing strategy too, perhaps making it more likely that you'd take another card if you have an interim hand value of 17; whereas, if the dealer had a five showing, for example, you might be more likely to stick with a hand value of 16.

In previous columns, you've already seen the basic script to display and calculate a hand's value, so this is nothing new:

echo -n "** Dealer's hand: "
showCard ${dealer[1]} ; echo -n "$cardname, "
showCard ${dealer[2]} ; echo "$cardname"

handValue ${dealer[1]} ${dealer[2]}

But, now we're going to add a loop below this that will keep taking cards until the hand value is 17 or higher (that's standard Las Vegas Blackjack rules: 16 and lower the dealer “hits” or takes another card, and 17 or higher the dealer “stands” or sticks with its hand).

This is a bit tricky, so take your time reading it:

while [ $handvalue -lt 17 ]
do
  dealer[$nextdealercard]=${newdeck[$nextcard]}

  showCard ${dealer[$nextdealercard]}

  nextcard=$(( $nextcard + 1 ))
  nextdealercard=$(( $nextdealercard + 1 ))

  echo """ ; echo "** Dealer takes: $cardname"

  handValue ${dealer[1]} ${dealer[2]} ${dealer[3]} \
            ${dealer[4]} ${dealer[5]}
done

With some good routines and variables already in place, it turns out to be surprisingly succinct to have the dealer play its hand out. Hurray for that bit of good design!

Who Won the Game?

Now that we have the game-play logic, it's simply a matter of having the set of conditionals to figure out who won or whether the game ended with a tie:

if [ $handvalue -gt 21 ]
then
	echo "**** Dealer busted!  Player wins with \
	$playerhandvalue!"
  playerwin=$(( $playerwin + 1 ))
elif [ $handvalue -eq $playerhandvalue ]
then
	echo "**** Dealer and player tie with \
	$handvalue points."
elif [ $handvalue -lt $playerhandvalue ]
then
	echo "**** Player wins with $playerhandvalue"
  playerwin=$(( $playerwin + 1 ))
else
	echo "**** Dealer wins with $handvalue"
  dealerwin=$(( $dealerwin + 1 ))
fi

Whaddya think? Enough code listings?

Let's see how the game plays now:

$ sh blackjack.sh

**** Welcome to Blackjack.sh! ****

Dealer's hand: Queen of Hearts, (card face down)

You've been dealt: 2 of Spades, 7 of Hearts

H)it or S)tand? (recommended: hit) hit

You've been dealt: 10 of Diamonds

H)it or S)tand? (recommended: stand) stand

You stand with a hand value of 19

Dealer's hand: Queen of Hearts, 4 of Hearts

Dealer takes: Queen of Clubs

**** Dealer busted!  Player wins with 19!

You can see that we had 2S and 7H (9 points), took a card, 10D, giving us 19 points. We stayed with that, and the dealer revealed that it had QH 4H, 14 points, and took another card which proved to be QC, which took the dealer over 21 points. We won!

There are a few more nuances to the program, including keeping track of how many times the dealer or player wins, and at the point where you're asked “hit or stand”, you now can type in quit (or q) to quit. Then, it'll show you:

H)it or S)tand? (recommended: stand) q

Player quits.  Standings: dealer wins: 5 and player wins: 3

______________________

Dave Taylor has been hacking shell scripts for over thirty years. Really. He's the author of the popular "Wicked Cool Shell Scripts" and can be found on Twitter as @DaveTaylor and more generally at www.DaveTaylorOnline.com.

Comments

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

Some improvements

freefox's picture

Here is one solution for the Ace problem. Note that it increases the probability to exceed the hard coded value of 5 cards in a hand.

The other stuff are just to make the program run smoother.

/freefox

> aces=0 # number of Ace in the hand
107,108c108,110
< 0|11|12 ) rankvalue=10 ;;
< 1 ) rankvalue=11 ;;
---
> 0|11|12 ) rankvalue=10 ;;
> 1 ) rankvalue=11
> aces=$(( $aces + 1 )) ;;
111a114,118
>
> if [ $handvalue -gt 21 ] && [ $aces -gt 0 ] ; then
> handvalue=$(( $handvalue - 10 ))
> aces=$(( $aces - 1 ))
> fi
123a131,133
> echo ""
> echo "------ $dealerwin <-- dealer -- player --> $playerwin ------"
>
156c166,167
< exit 0
---
> dealerwin=$(( $dealerwin + 1 ))
> continue
162c173,174
< exit 0
---
> dealerwin=$(( $dealerwin + 1 ))
> continue
166c178,179
< exit 0
---
> playerwin=$(( $playerwin + 1 ))
> continue
197,198c210,215
< if [ "$answer" = "stand" -o "$answer" = "s" ] ; then
< break
---
> ## To go for the obious choice, when no answer,
> ## the recommended value are analysed ones more.
> if [ "$answer" = "" ] && [ $handvalue -gt 15 ] ; then
> break
> elif [ "$answer" = "stand" -o "$answer" = "s" ] ; then
> break
222c239
< break
---
> continue
271,273d287
< echo ""
< echo "---------------------------------------------------"
<

What about a licens?

freefox's picture

It's a gaim. It's code. It's been published.
You encourage downloads. You ask for updates.

Why not put a licens on it? GPL?

/freefox

Webinar
One Click, Universal Protection: Implementing Centralized Security Policies on Linux Systems

As Linux continues to play an ever increasing role in corporate data centers and institutions, ensuring the integrity and protection of these systems must be a priority. With 60% of the world's websites and an increasing share of organization's mission-critical workloads running on Linux, failing to stop malware and other advanced threats on Linux can increasingly impact an organization's reputation and bottom line.

Learn More

Sponsored by Bit9

Webinar
Linux Backup and Recovery Webinar

Most companies incorporate backup procedures for critical data, which can be restored quickly if a loss occurs. However, fewer companies are prepared for catastrophic system failures, in which they lose all data, the entire operating system, applications, settings, patches and more, reducing their system(s) to “bare metal.” After all, before data can be restored to a system, there must be a system to restore it to.

In this one hour webinar, learn how to enhance your existing backup strategies for better disaster recovery preparedness using Storix System Backup Administrator (SBAdmin), a highly flexible bare-metal recovery solution for UNIX and Linux systems.

Learn More

Sponsored by Storix