Kernel Korner: The Linux Test Project
The Linux Test Project (LTP) was developed to improve the Linux kernel by bringing automated testing to kernel design. Prior to the LTP, no formal testing environment was available to Linux developers. Although most developers unit-tested the effects of their own enhancements and patches, systematic integration testing did not exist. The LTP's primary goal is to provide a test suite to the Open Source community that helps to validate the reliability, robustness and stability of the Linux kernel. The suite tests kernel function and regression, with and without stress. The LTP is not a performance benchmark, but benchmarks often are used to drive the kernel during testing.
The LTP began as 100 test programs developed by SGI. Now, through the joint efforts of SGI, IBM, OSDL, Bull, Wipro Technologies and individual Linux developers, the LTP contains over 2,500 test programs, also called test cases, and a number of automation tools. The LTP supports multiple architectures, including x86, IA32/64, PPC32/64, and 32- and 64-bit s/390.
Although other test suites and projects exist, the LTP includes an environment for defining new tests, integrating existing benchmarks and analyzing test results. The Software Testing Automation Framework (STAF/STAX) is an open-source system that allows you to plan, distribute, execute and collect test results from a large pool of multiplatform test hosts. STAF/STAX also provides a powerful GUI-monitoring application that allows you to interact with and monitor the progress of your jobs. Test-coverage visualization tools let you see how much of a test's source code is executed by the kernel.
The IBM Linux Technology Center (LTC) has played a key role in using the LTP to uncover defects in the Linux kernel. Using the LTP, the LTC has tested more than 50 new kernel versions and found more than 500 defects. As covered in Linda Scott's whitepaper (see the on-line Resources), a typical kernel test cycle uses the LTP for focus testing to isolate and validate Linux component and application stability. This includes regression testing on new kernels to ensure they meet the functionality of previous kernels. Integration testing then validates component interaction, driven by macro-benchmark workloads. Finally, reliability and stress testing validate systemic robustness with extended duration tests (96 hours to 30 days).
The remainder of this article describes how to download and run the LTP test suite using the automation tools. We also discuss some LTP tools that can be used to help improve kernel development and testing.
The tests cover a wide range of kernel functions, including system calls, networking and filesystem functionality. The basic building block of the test suite is a test program that performs a sequence of actions and verifies the outcome. The test results usually are restricted to PASS or FAIL. Together, all the test programs and tools make up the LTP package.
The LTP is a GPL package and is available from SourceForge.net. A stable version of the LTP test suite source, ltp-yyyymmdd.tgz is released monthly. As of this writing, the latest version is ltp-20040405. After downloading the package, extract and install as follows:
tar zxf ltp-20040405.tgz cd ltp-20040405 make make install
You need root access to perform that last step and also to run the test suite. The test suite also is available in binary and source RPM format. For those of you who like living on the edge, development snapshots can be downloaded through anonymous CVS (see Resources).
Once installed, a number of options are available for running the LTP test suite. The most popular method is to use the runalltests.sh script, which executes about 800 of the original tests. The tests not included in runall are destructive, require monitoring or for some other reason cannot be automated. The runall script has a default behavior to run a single iteration of the test suite and produce verbose screen output. This output can be omitted with the quiet option (-q). As a simple introduction, we ignore the screen information for now and use the -l logfile_name and -p options to generate human-readable log results.
The test cases are executed by the test driver called Pan. Pan, included in the LTP package, is a lightweight driver used to run and clean up test programs. The runalltests script calls Pan to execute a set of test cases or a single test case. You can execute a set of test cases by providing runalltests with a -f scenario file. A scenario file is a simple ASCII text file that contains two columns. The first column has the name of a test case, and the second column has the command to be run. Comments start with a pound sign. For example:
# Testcase to test mmap function of the kernel testcase1 mmap3 -l 100 -n 50 # Testcase to stress the kernel scheduler testcase2 sched_stress.sh
The test driver uses the exit value of the test case to decide success or failure of a test. If the test case exits with a non-zero value, Pan records this as FAIL. If the test case exits with a value zero, the driver records it as PASS.
The simplest use of the test suite is to run it on your system to ensure that there are no failures:
runalltests.sh -l log -p -o output
For known failures, the LTP package includes an explanation and pointers to places for more information. Below is the partial log file from running ltp-20040506 on a 2.6.3 kernel:
Test Start Time: Mon May 17 14:20:45 2004 ----------------------------------------- Testcase Result Exit Value -------- ------ ---------- abort01 PASS 0 accept01 PASS 0 access01 PASS 0 ... rwtest01 PASS 0 rwtest02 PASS 0 rwtest03 FAIL 2 rwtest04 FAIL 2 rwtest05 PASS 0 iogen01 PASS 0 ... ----------------------------------------------- Total Tests: 797 Total Failures: 6 Kernel Version: 2.6.3-gcov Machine Architecture: i686 Hostname: ltp2
In this partial log, 797 tests were run and six failed. rwtest03 and rwtest04 are I/O tests that failed due to mmap running out of resources. This problem has been resolved. The remaining failures, not shown in the log, are described below:
setegid01: verify that setegid does not modify the saved gid or real gid—failed because of a bug in glibc 2.3.2.
dio18,dio22: I/O testing—failed because of data comparison mismatch.
nanosleep02: verify that nanosleep will suspend and return remaining sleep time after receiving signal—failed due to lack of microsecond clock precision.
Writing test programs is fairly straightforward. The test cases are written in ANSI C and BASH and use the LTP Application Program Interfaces (APIs) provided by the LTP library libltp to report test status. Templates are provided that show you how to develop test cases using libltp. The test cases can use the interface to print results messages, break out of testing sequence and report a test status such as PASS or FAIL. Manual pages for using these APIs are provided in the test suite package and also on the LTP Web site. For more on the esoteric uses of LTP and a tutorial on developing tests that can be included in the LTP, see the Iyer and Larson papers in Resources.
|Happy Birthday Linux||Aug 25, 2016|
|ContainerCon Vendors Offer Flexible Solutions for Managing All Your New Micro-VMs||Aug 24, 2016|
|Updates from LinuxCon and ContainerCon, Toronto, August 2016||Aug 23, 2016|
|NVMe over Fabrics Support Coming to the Linux 4.8 Kernel||Aug 22, 2016|
|What I Wish I’d Known When I Was an Embedded Linux Newbie||Aug 18, 2016|
|Pandas||Aug 17, 2016|
- Happy Birthday Linux
- ContainerCon Vendors Offer Flexible Solutions for Managing All Your New Micro-VMs
- Downloading an Entire Web Site with wget
- Updates from LinuxCon and ContainerCon, Toronto, August 2016
- New Version of GParted
- NVMe over Fabrics Support Coming to the Linux 4.8 Kernel
- Tor 0.2.8.6 Is Released
- What I Wish I’d Known When I Was an Embedded Linux Newbie
- Blender for Visual Effects
- A New Project for Linux at 25
With all the industry talk about the benefits of Linux on Power and all the performance advantages offered by its open architecture, you may be considering a move in that direction. If you are thinking about analytics, big data and cloud computing, you would be right to evaluate Power. The idea of using commodity x86 hardware and replacing it every three years is an outdated cost model. It doesn’t consider the total cost of ownership, and it doesn’t consider the advantage of real processing power, high-availability and multithreading like a demon.
This ebook takes a look at some of the practical applications of the Linux on Power platform and ways you might bring all the performance power of this open architecture to bear for your organization. There are no smoke and mirrors here—just hard, cold, empirical evidence provided by independent sources. I also consider some innovative ways Linux on Power will be used in the future.Get the Guide