This utility will go over your system and extract a lot of information, enough information that you should be able to rebuild the system almost exactly as it was. That's probably a little more detail than I'd be comfortable with putting on a web site, but great to print out and put in your system's notebook (your systems do have notebooks, right?). Requires: BASH and standard UNIX tools.
—David A. Bandel
Shortly after the kernel's Halloween feature-freeze, Guillaume Boissiere decided to put together some statistics on the incorporation of features into the 2.5 tree. He examined almost the entire history of the 2.5 development cycle, starting in early 2002. He created seven possible status categories for any given feature: planning, started, alpha, beta, ready for inclusion, pending inclusion and fully merged. His first progress chart (Figure 1) shows the percentage of features in each category. The second progress chart (Figure 2) shows the actual number of features in each category, changing over time. Without making any claim to complete accuracy, the graphs are interesting, if for no other reason than to observe how seriously most developers took the drive toward feature-freeze. Note also the hump of work done over the summer, followed by a complete end to new feature planning. That hump of activity corresponds roughly to the time when the decision was made to freeze by November.
To facilitate the movement from feature-freeze to actual 2.6 (or 3.0) release, the Open Source Development Lab (OSDL) donated labor and equipment to maintain a Bugzilla bug-tracking database for the Linux kernel at bugzilla.kernel.org. Support for this was initially strong among developers, but it tapered off a bit when big guns, like David S. Miller, found duplicate entries and frivolous reports made the system, at least in its original form, more trouble than it was worth. No one wanted to give up on it, however, and a concerted effort seems to be underway to bring the bug database to a usable state.
In more debugging news, Linus Torvalds indicated for the first time he might be willing to accept patches into the kernel to support a kernel-based debugger. Traditionally, Linus' stance has been that real programmers debug from source files. While not actually explaining the reason for his change of policy, he now seems to think that a kernel debugger running across a network would be a good feature to let into the kernel. Don't look for it in the next stable series, however, as he was careful to make this statement after the feature-freeze had passed.
A new read-only compressed filesystem, along the lines of cramFS, emerged in late October and targets the 2.4 kernel. SquashFS claims to be faster and to produce tighter compression than either zisoFS or cramFS. The author, Phillip Lougher, wanted to address some of the limitations of other compressed filesystems, particularly in the areas of maximum file size, maximum filesystem size and maximum block size.
And speaking of filesystems, does anyone remember xiaFS? In 1993 it was regarded, along with ext2fs, as a serious contender for world domination. In fact, the two filesystems leapt into public use within a few weeks of one another. For a while it even looked as though xiaFS had taken the lead. By 1994, however, it had essentially dropped off the map, and a few years later it was actually dropped from the official kernel tree. In 2000, Linus remarked that it would be fun to have it back. Finally, just after the Halloween freeze Carl-Daniel Hailfinger asked if this offer was still good. Linus said sure, and even offered to make an exception to the feature-freeze, if Carl could deliver the patches.
|Using Salt Stack and Vagrant for Drupal Development||May 20, 2013|
|Making Linux and Android Get Along (It's Not as Hard as It Sounds)||May 16, 2013|
|Drupal Is a Framework: Why Everyone Needs to Understand This||May 15, 2013|
|Home, My Backup Data Center||May 13, 2013|
|Non-Linux FOSS: Seashore||May 10, 2013|
|Trying to Tame the Tablet||May 08, 2013|
- Using Salt Stack and Vagrant for Drupal Development
- Making Linux and Android Get Along (It's Not as Hard as It Sounds)
- New Products
- Validate an E-Mail Address with PHP, the Right Way
- Drupal Is a Framework: Why Everyone Needs to Understand This
- A Topic for Discussion - Open Source Feature-Richness?
- Home, My Backup Data Center
- RSS Feeds
- New Products
- Tech Tip: Really Simple HTTP Server with Python
- Automatically updating Guest Additions
4 min 51 sec ago
- I like your topic on android
51 min 19 sec ago
- Reply to comment | Linux Journal
1 hour 12 min ago
- This is the easiest tutorial
7 hours 26 min ago
- Ahh, the Koolaid.
13 hours 5 min ago
- git-annex assistant
19 hours 5 min ago
- direct cable connection
19 hours 27 min ago
- Agreed on AirDroid. With my
19 hours 37 min ago
- I just learned this
19 hours 42 min ago
20 hours 12 min ago
Enter to Win an Adafruit Prototyping Pi Plate Kit for Raspberry Pi
It's Raspberry Pi month at Linux Journal. Each week in May, Adafruit will be giving away a Pi-related prize to a lucky, randomly drawn LJ reader. Winners will be announced weekly.
Fill out the fields below to enter to win this week's prize-- a Prototyping Pi Plate Kit for Raspberry Pi.
Congratulations to our winners so far:
- 5-8-13, Pi Starter Pack: Jack Davis
- 5-15-13, Pi Model B 512MB RAM: Patrick Dunn
- Next winner announced on 5-21-13!
Free Webinar: Linux Backup and Recovery
Most companies incorporate backup procedures for critical data, which can be restored quickly if a loss occurs. However, fewer companies are prepared for catastrophic system failures, in which they lose all data, the entire operating system, applications, settings, patches and more, reducing their system(s) to “bare metal.” After all, before data can be restored to a system, there must be a system to restore it to.
In this one hour webinar, learn how to enhance your existing backup strategies for better disaster recovery preparedness using Storix System Backup Administrator (SBAdmin), a highly flexible bare-metal recovery solution for UNIX and Linux systems.