New Products
ImageStream Internet Solutions is shipping its new 1000 series ATM network adaptors, including DS3/E3 and OC3 cards in PCI and PMC formats. The new cards are designed to work as components in routers, servers and test equipment. The 1000 series ATM adaptors are 32-bit PCI 2.1-compliant cards that feature ATM segmentation and reassembly to optimize PCI bus performance with small packets. The PCI and PMC format cards include the 1001-DE, a dual-function DS3/E3 card and the 1001-O3M and 1001-O3S, which are OC3 cards for multimode and single-mode applications.
Contact ImageStream, Inc., 7900 East 8th Road, Plymouth, Indiana 46563, 800-813-5123 (toll-free), info@imagestream.com, www.imagestream.com.
eclipse.org has made an open-source C and C++ integrated development environment (IDE) available for the eclipse platform on Linux workstations. The C/C++ IDE for the eclipse platform includes a GUI-based source code editor, an integrated debugger and the ability to access a command-line interface for forming advanced debugger requests. It joins existing Java support on the eclipse platform, an open-source environment for creating, integrating and deploying application development tools across a broad range of technologies. The C/C++ IDE is available for download from the web site.
Contact www.eclipse.org.
NIC Express 1.0 is a hardware and vendor-neutral trunking solution for load balancing network traffic across two or more network connections, thereby increasing throughput and fault tolerance. NIC Express also increases fault tolerance by searching the network in addition to the server. It locates both physical and logical faults and reroutes traffic, eliminating single points of failure between any two endpoints on the network. Version 2.4 and higher of the kernel are supported, and the NIC Express works with any 10/100/1000 Ethernet NIC and any layer 2/3/4 switch.
Contact IP Metrics Software, Inc., 416 North Main Street, Suite #231, Euless, Texas 76039, 877-358-1007 (toll-free), sales@ipmetrics.com, www.ipmetrics.com.
The Geodesic Suite contains analyzers, debuggers and diagnostic tools for application development, testing and deployment. Included in the suite are Great Circle, a development debugging environment that operates via a web browser; Geodesic Runtime Solutions, which integrate into deployed applications to diagnose and resolve server-based problems at runtime without interruption; and Geodesic Analyzer, which installs at runtime and reports performance bottlenecks and reliability risks. Support is provided for 64-bit Itanium processors and 32-bit Pentium processors.
Contact Geodesic Systems, 414 North Orleans, Suite 410, Chicago, Illinois 60610, 800-360-8388 (toll-free), sales@geodesic.com, www.geodesic.com.
Ch 2.1, a C/C++ interpreter for scripting that is free for academic and nonprofit use, is now available from SoftIntegration. A superset of C with C++ classes, Ch 2.1 supports C90, major features of C99, POSIX, X11/Motif, OpenGL, ODBC, XML and GTK+. It also offers support for generic mathematical functions, computational arrays and advanced numerical functions for linear systems. Geared toward rapid application development, Ch can be used for cross-platform shell programming for regression testing, system administration, automating tasks, real-time interactive computing, rapid prototyping and 2-D/3-D plotting.
Contact SoftIntegration, Inc., 216 F Street, #68, Davis, California 95616, 530-297-7398, sales@softintegration.com, www.softintegration.com.
Red Hat announced enterprise-level offerings for its Red Hat Network Services, under the Workgroup heading. The new Workgroup features and services include system grouping, allowing administrators to group workload-focused systems together for management purposes; multiple administrators, so that rights to specific systems can be spread across large organizations; and system set managers, allowing actions to be applied to sets of systems instead of single systems. In addition, the Workgroup Service subscription allows access to the network proxy server and the network satellite.
Contact Red Hat, Inc., PO Box 13588, RTP, North Carolina 27709, 888-733-4281 (toll-free), www.redhat.com.
Today’s modular x86 servers are compute-centric, designed as a least common denominator to support a wide range of IT workloads. Those generic, virtualized IT workloads have much different resource optimization requirements than hyperscale and cloud applications. They have resulted in a “one size fits all” enterprise IT architecture that is not optimized for a specific set of IT workloads, and especially not emerging hyperscale workloads, such as web applications, big data, and object storage. In this report, you will learn how shifting the focus from traditional compute-centric IT architectures to an innovative disaggregated fabric-based architecture can optimize and scale your data center.
Sponsored by AMD
Built-in forensics, incident response, and security with Red Hat Enterprise Linux 6
Every security policy provides guidance and requirements for ensuring adequate protection of information and data, as well as high-level technical and administrative security requirements for a system in a given environment. Traditionally, providing security for a system focuses on the confidentiality of the information on it. However, protecting the data integrity and system and data availability is just as important. For example, when processing United States intelligence information, there are three attributes that require protection: confidentiality, integrity, and availability.
Learn more about catching the bad guy in this free white paper.
Sponsored by DLT Solutions
| Making Linux and Android Get Along (It's Not as Hard as It Sounds) | May 16, 2013 |
| Drupal Is a Framework: Why Everyone Needs to Understand This | May 15, 2013 |
| Home, My Backup Data Center | May 13, 2013 |
| Non-Linux FOSS: Seashore | May 10, 2013 |
| Trying to Tame the Tablet | May 08, 2013 |
| Dart: a New Web Programming Experience | May 07, 2013 |
- RSS Feeds
- New Products
- Making Linux and Android Get Along (It's Not as Hard as It Sounds)
- Drupal Is a Framework: Why Everyone Needs to Understand This
- A Topic for Discussion - Open Source Feature-Richness?
- Home, My Backup Data Center
- New Products
- Trying to Tame the Tablet
- Developer Poll
- Paranoid Penguin - Building a Secure Squid Web Proxy, Part IV
Enter to Win an Adafruit Prototyping Pi Plate Kit for Raspberry Pi

It's Raspberry Pi month at Linux Journal. Each week in May, Adafruit will be giving away a Pi-related prize to a lucky, randomly drawn LJ reader. Winners will be announced weekly.
Fill out the fields below to enter to win this week's prize-- a Prototyping Pi Plate Kit for Raspberry Pi.
Congratulations to our winners so far:
- 5-8-13, Pi Starter Pack: Jack Davis
- 5-15-13, Pi Model B 512MB RAM: Patrick Dunn
- Next winner announced on 5-21-13!
Free Webinar: Linux Backup and Recovery
Most companies incorporate backup procedures for critical data, which can be restored quickly if a loss occurs. However, fewer companies are prepared for catastrophic system failures, in which they lose all data, the entire operating system, applications, settings, patches and more, reducing their system(s) to “bare metal.” After all, before data can be restored to a system, there must be a system to restore it to.
In this one hour webinar, learn how to enhance your existing backup strategies for better disaster recovery preparedness using Storix System Backup Administrator (SBAdmin), a highly flexible bare-metal recovery solution for UNIX and Linux systems.




3 hours 2 min ago
7 hours 16 min ago
9 hours 49 min ago
14 hours 28 min ago
16 hours 50 min ago
1 day 9 hours ago
1 day 12 hours ago
1 day 13 hours ago
1 day 14 hours ago
1 day 14 hours ago