Best of Technical Support
When I use Netscape from a Windows 95 PC to access my Linux 5.0 mail server, I get a prompt (as I should) for my login and password. However, when I type my password (or login) wrong, authentication fails and the server won't let me read mail, but it will let me send mail. That mail is sent with my name and address on it, which makes it easy for people to use my account and send mail using my name. Since I am also the administrator of that mail server, should I shut down imap and pop3? I don't want my users to have this problem too.
I have checked out PAM configuration, and imap uses the same library (pampwdb.so) as login and other critical services to authenticate users. So, what can I do to solve this problem and provide imap and pop3 service? —Diego A. Puertas Fernández, Red Hat 5.0
There is nothing you can do about it. What actually happens is that Netscape uses SMTP to send mail, and SMTP doesn't require any kind of session or login. Netscape (or any other mail client, for that matter) connects to the sendmail running on your server, gives it your piece of e-mail, and your server relays it to the Internet. Anyone can send mail as anyone else (especially on a Windows machine, since it doesn't provide the ident service and doesn't return a result that can be trusted). If you look in e-mail headers, most of the information (outside of the Received lines) can easily be spoofed. —Marc Merlin, email@example.com
I run a small web-hosting service in San Juan, Puerto Rico. The keyboard of one of my servers has stopped responding to Linux boots and I can access it only through TELNET. The server there has no response from the keyboard. My guess is that it was hacked as security in my network is just starting to be updated. Can you please help?
I've been told that by closing the unused ports I can have a more secure environment—how is that done? —Frank Nazario, Red Hat 5.0
The keyboard not working sounds like a hardware problem. Will the keyboard let you go into the BIOS setup?
As far as security goes, first of all edit /etc/inetd.conf and comment out anything you aren't sure you need, then restart inetd (with killall -HUP inetd). If it turns out you need something you commented out, just go back in to /etc/inetd.conf and uncomment it, then restart inetd again.
Then you'll want to kill any daemons you don't need. Be a little more careful here—make sure you don't kill off things like atd and crond. On the average server, you can (and should) kill off things like lpd, nfs, portmap and smb. Run /usr/sbin/ntsysv (a very handy utility included with Red Hat 5.x) and uncheck things that shouldn't be started. Then reboot or do:
for file in /etc/rc.d/rc3.d/K* ; do $file stop ; done
to make sure the things that shouldn't be running aren't.
The other important thing you want to do is keep up with updates from Red Hat. There have been some pretty major security holes announced recently, so you'll want to get all the updates on a regular basis. —Steven Pritchard, firstname.lastname@example.org
My ATAPI CD-ROM won't eject or unmount in X—I get an error message saying the drive is busy. I tried closing everything but one X term and made sure the current directory wasn't in the CD, but it still says it's busy. Quitting X solves this problem. —John Vestrum, Red Hat 5.0
In my experience, this problem has been caused by a CD player running in a menu/button bar (such as AfterStep's “wharf” button bar) or a player that did not exit correctly after being used. Make sure there are absolutely no audio CD players running anywhere—if necessary, disable CD players you may have in a “wharf” type button bar—and see if that helps. —Erik Ratcliffe, email@example.com
I am about to install Red Hat 5.0, but would like to know if I need a new modem first so I don't lose WWW access. My current modem is a “Windows only” US Robotics Winmodem—yeah, I know—but it was cheap.
Do I need a new modem, or is there a driver available that enables use of this Winmodem under Red Hat 5.0? —Bill Brower, Red Hat 5.0
Sorry, but unfortunately you need a “real” modem. By “real”, I mean one that simply presents a serial interface to the hardware or plugs directly into a serial port. The problem with the “Winmodem” is that it does all the signal processing using the CPU of the host computer instead of having its own CPU to do the grunt work. I don't want to debate the relative merits of that process here, but suffice it to say that I will never buy a Winmodem nor will anyone I know. —Donnie Barnes, firstname.lastname@example.org
|September 2015 Issue of Linux Journal: HOW-TOs||Sep 01, 2015|
|September 2015 Video Preview||Sep 01, 2015|
|Using tshark to Watch and Inspect Network Traffic||Aug 31, 2015|
|Where's That Pesky Hidden Word?||Aug 28, 2015|
|A Project to Guarantee Better Security for Open-Source Projects||Aug 27, 2015|
|Concerning Containers' Connections: on Docker Networking||Aug 26, 2015|
- Optimization in GCC
- Using tshark to Watch and Inspect Network Traffic
- September 2015 Issue of Linux Journal: HOW-TOs
- Problems with Ubuntu's Software Center and How Canonical Plans to Fix Them
- Concerning Containers' Connections: on Docker Networking
- A Project to Guarantee Better Security for Open-Source Projects
- Firefox Security Exploit Targets Linux Users and Web Developers
- Where's That Pesky Hidden Word?
- My Network Go-Bag
- Doing Astronomy with Python