Automated Mail Purging for SMTP Mail
If your Linux system actively handles electronic mail, especially for several users, you may discover that mail consumes a lot of space where it resides, usually in one of /var/mail (System V-compliant systems), /usr/mail (BSD), /usr/spool/mail or /var/spool/mail (where my Debian GNU/Linux system stores it). The collection of Bash scripts presented here provides a way to reduce the space used by mail files by purging old messages.
For several months I worked as a contractor at a company that used a Unix system to process all electronic mail for its employees. Several hundred users retrieved their mail from a single host that served as both Simple Mail Transfer Protocol (SMTP) server (for general mail transport) and Post Office Protocol (POP3) server (for clients to retrieve mail without logging into the host). While it had a home-grown mail purge system, users could inadvertently defeat the system, allowing files to grow without end.
The existing mail purge system ran as a nightly cron job. It would determine the date 60 days before and construct a string in SMTP mail header format. It would then loop through all the user mail files in /var/mail using the grep command to find that string and note the lines on which it appeared. For each file that contained the string, it would use the tail command to discard everything prior to the line containing the target date string.
If messages arrived undamaged, stayed intact, always appeared in date sequence and cron called this job daily, this method would usually work. However, sometimes cron doesn't run a job, messages do not always arrive in date order and other software run against mail files might reorder messages. Because of the existing solution's all-or-nothing keep-or-discard method, it had the following problems:
It was possible to lose newer messages if an older date appeared after a newer one.
If a message body had an un-escaped string that matched the search string, part of a message could be lost.
If older messages appeared out of order, they might remain longer than desired, since the keep/discard decision was based on simply finding a string, rather than examining each message's date.
It depended on finding the exact date string instead of making a numeric comparison that could discard messages older than the target date. A message containing invalid headers and lying at the end of the message file might remain, even if it had aged beyond the retention period.
A further effect is that some mail readers might not handle damaged messages gracefully.
To find a more reliable solution, I sought an existing free program that would address my needs. I asked my peers, including those on Internet mailing lists, but got no useful response. A search of Internet Unix archives revealed nothing, either. Thus, I was left to create a solution.
To ensure acceptable handling of messages, I settled on these requirements:
Each message must undergo individual examination to keep or discard it based on its creation date.
A reliable way to determine where messages began and ended was needed.
Because I discovered that date formats vary a bit (mail-handling programs only loosely follow the rules), I needed to convert each message date to a simple number and use that number for the keep/discard choice.
I discovered that formail, part of the procmail mail-handling package, can split an SMTP mail file into individual messages and repair damaged headers in one pass. This ability enables individual examination of each message to decide whether to keep or discard it. Since each message would undergo separate examination, date order would not be important.
The first script, mailrm.sh (see Listing 1), requires one command-line argument, naming the number of days of messages to preserve. When run, it sets needed variables and starts checking each mail file in $MAILDIR. It uses formail, located in $FORMAIL, to verify, repair and split each mail file into individual messages.
Each message is then examined by the mailage.sh script (see Listing 2) to determine whether to keep it. First, it checks the message header's “From” line for the date, moving fields as necessary. (If formail has to repair a message date, the resulting date doesn't have a time zone in it.) Then it compares the message date with the value computed for today minus the number of days to retain messages. If the message is newer, the script concatenates the message onto STDOUT, saving it to a temporary file. If the message is older, the script exits with no output.
Afterward, if the new output file has a different number of lines from the original, it is moved into the original file's place, its ownership is reset and its permissions are restricted. If the original mail file is now zero length, mailrm.sh removes it. If a user has been removed from a system leaving his mail behind, this script deletes his mail file after all the messages in it have expired.
The third script, maildate.sh (see Listing 3), returns the integer number of days since 1900 of an input date in the form “MMM DD YYYY”. The returned integer is useful for calculating the difference between two dates.
|Omesh Tickoo and Ravi Iyer's Making Sense of Sensors (Apress)||Apr 21, 2017|
|Low Power Wireless: 6LoWPAN, IEEE802.15.4 and the Raspberry Pi||Apr 20, 2017|
|CodeLathe's Tonido Personal Cloud||Apr 19, 2017|
|Wrapping Up the Mars Lander||Apr 18, 2017|
|MultiTaction's MT Canvus-Connect||Apr 17, 2017|
|Android Candy: Facebook Everything?!?!||Apr 14, 2017|
- Low Power Wireless: 6LoWPAN, IEEE802.15.4 and the Raspberry Pi
- Teradici's Cloud Access Platform: "Plug & Play" Cloud for the Enterprise
- The Weather Outside Is Frightful (Or Is It?)
- Simple Server Hardening
- Understanding Firewalld in Multi-Zone Configurations
- Gordon H. Williams' Making Things Smart (Maker Media, Inc.)
- Bash Shell Script: Building a Better March Madness Bracket
- A Switch for Your RPi
- IGEL Universal Desktop Converter
Pick up any e-commerce web or mobile app today, and you’ll be holding a mashup of interconnected applications and services from a variety of different providers. For instance, when you connect to Amazon’s e-commerce app, cookies, tags and pixels that are monitored by solutions like Exact Target, BazaarVoice, Bing, Shopzilla, Liveramp and Google Tag Manager track every action you take. You’re presented with special offers and coupons based on your viewing and buying patterns. If you find something you want for your birthday, a third party manages your wish list, which you can share through multiple social- media outlets or email to a friend. When you select something to buy, you find yourself presented with similar items as kind suggestions. And when you finally check out, you’re offered the ability to pay with promo codes, gifts cards, PayPal or a variety of credit cards.Get the Guide