Listing 4. Full Copy of X Config
# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent
# of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but
# may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the server abort
# sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the / mode
# switching
# sequences. This allows clients to receive these key events.
#DontZoom
# This allows the server to start up even if the
# mouse device can't be opened/initialised.
AllowMouseOpenFail
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "250 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Pointer section
# **********************************************************************
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/usbmouse"
Option "Emulate3Buttons"
Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
Section "InputDevice"
Identifier "Mouse2"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons"
Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
Section "Module"
# This loads the DBE extension module.
Load "dbe"
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
#Option "omit xfree86-dga"
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Generic|High Frequency SVGA, 1024x768 at 70 Hz"
VendorName "Unknown"
ModelName "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5-57.0
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-90
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
Identifier "Generic VGA"
Driver "vga"
EndSection
Section "Device"
Identifier "G450_1"
VendorName ""
BoardName ""
Driver "mga"
# Clock lines
# Uncomment following option if you see a big white block
# instead of the cursor!
# Option "sw_cursor"
Option "DPMS"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "G450_2"
VendorName ""
BoardName ""
Driver "mga"
# Clock lines
# Uncomment following option if you see a big white block
# instead of the cursor!
# Option "sw_cursor"
Option "DPMS"
BusID "PCI:1:0:0"
Screen 1
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
Identifier "screen1"
Device "G450_1"
Monitor "Generic|High Frequency SVGA, 1024x768 at 70 Hz"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "Screen"
Identifier "screen2"
Device "G450_2"
Monitor "Generic|High Frequency SVGA, 1024x768 at 70 Hz"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
Screen "screen1" LeftOf "screen2"
Screen "screen2"
Option "Xinerama"
InputDevice "Mouse1" "CorePointer"
InputDevice "Mouse2" "SendCoreEvents"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection