Setting up a Multi-Server Security Engine Installation

Setting up a Multi-Server Security Engine Installation

With the launch of Security Engine 1.0.x, we enabled the Security Engine to function as an HTTP REST API, allowing it to gather signals from other Security Engines.

I will guide you through the steps to set up the CrowdSec Security Engine across multiple servers, where one server will serve as the parent and two additional machines will forward alerts to it.

Benefits

Sharing cybersecurity incidents across machines using the CrowdSec Security Engine is a highly effective strategy to enhance collective security defenses. By leveraging CrowdSec's capability to distribute remediations among connected machines, each machine benefits from real-time updates about new threats detected elsewhere in the network.

Architecture

 

CrowdSec Goals Infographic

 

In the diagram above, the parent Security Engine, designated as server-1, will be set up as the HTTP REST API, commonly known as the LAPI (Local API). This engine will be in charge of storing and distributing the gathered signals. Remediation is managed through the Remediation Components, which depend on the LAPI offered by server-1. It's crucial to understand that mitigation can occur independently from detection.

Server-2 and server-3 are designated as internet-facing machines that will host services available to the public and will be known as the child Log Processors. On these servers, we will install CrowdSec Security Engine and Remediation Components, which will interact with the server-1 LAPI.

Note: The phrase child Log Processors refers to a CrowdSec Security Engine that operates with its LAPI turned off. For more information on this, consult our Taxonomy Update Article.

We strongly encourage you to explore the CrowdSec Hub to learn about the extensive range of services the Security Engine can protect. This platform showcases the diverse capabilities of the Engine in securing everything from web applications to databases against cyber threats.

Architecture Decisions

I chose a postgresql backend for the server-1 LAPI to achieve greater stability in database read and write operations. Nevertheless, depending on your operational scale, you might discover that the default SQLite with WAL (Write-Ahead Logging) enabled meets your needs, if so you can skip section 1b.

Prerequisites

To follow this tutorial, you will need the following:

  • Two internet-facing Ubuntu 22.04 machines hosting services.
  • One Ubuntu 22.04 machine.
  • A local network connection between the Parent and Child machines.

Step 1: Setup and Configure Parent LAPI server-1

Step 1a: Install CrowdSec Security Engine

Let’s install the Security Engine, following the installation guide.

bash
curl -s https:/packagecloud.io/install/repositories/crowdsec/crowdsec/script.deb.sh | sudo bash
sudo apt install crowdsec

Step 1b (Optional): Using postgresql on Parent server-1

Install the PostgreSQL package using the apt package manager.

bash
sudo apt install postgresql

Next, transition to the 'postgres' Linux user and then connect by executing the psql command.

bash
sudo -i -u postgres
psql

You can set up the database and create an authorized user using the commands below. Replace <PASSWORD> with a password you select, you MUST keep it within the single quotes.

bash
postgres=# CREATE DATABASE crowdsec;
CREATE DATABASE
postgres=# CREATE USER crowdsec WITH PASSWORD '<PASSWORD>'; CREATE ROLE
postgres=# GRANT ALL PRIVILEGES ON DATABASE crowdsec TO crowdsec;
GRANT

Now, we'll set up the Security Engine to utilize this newly created database as its backend. This requires updating the db_config section in the /etc/crowdsec/config.yaml file.

yaml
db_config:
  log_level: info
  type: postgres
  user: crowdsec
  password: ""
  db_name: crowdsec
  host: 127.0.0.1
  port: 5432

During the installation of the Security Engine, the local machine was configured to use the SQLite database. To switch to the newly set up postgres database, you will need to regenerate the credentials and then proceed to restart the Security Engine.

bash
sudo cscli machines add -a –force
sudo systemctl restart crowdsec

Step 1c: Expose LAPI port

To enable communication between the LAPI and the child Log Processors/Remediation Components, it is necessary to adjust the LAPI's settings to accept connections from external sources, since its default configuration binds it to the machine's loopback address (127.0.0.1). This adjustment can be made by editing the /etc/crowdsec/config.yaml configuration file and changing the specified settings.

yaml
api:
  server:
    listen_uri: 10.0.0.1:8080

In the mentioned setup, we adjust the settings to listen on the 10.0.0.1 interface on port 8080. Should you wish to listen on several interfaces, you can change this to 0.0.0.0 and implement firewall rules to permit specific connections.

Step 2: Setup and Configure Child Log Processors

Step 2a: Install CrowdSec Security Engine

Let’s install the Security Engine, following the installation guide.

bash
curl -s https:/packagecloud.io/install/repositories/crowdsec/crowdsec/script.deb.sh | sudo bash
sudo apt install crowdsec

Step 2b: Configure to use LAPI server

First, lets register the Log Processor to the LAPI server using the following command

bash
sudo cscli lapi register -u http://10.0.0.1:8080

Ensure you adjust the -u flag to suit your network. Utilize the IP address if it's static, or opt for the hostname if your network allows it.

Next, we'll turn off the local API on the Security Engine, turning it into a Log Processor. This action is taken because the API won't be utilized, which will conserve system resources and avoid occupying a TCP port unnecessarily.

To achieve this, we can disable the API in the configuration with:

yaml
api:
  server:
    enable: false

Step 2c: Validate the registration request on LAPI

Since we used the cscli lapi register on the child Log Processor we must validate the request on server-1 via the following commands:

bash
sudo cscli machines list
NAME VERSION IP ADDRESS LAST UPDATE STATUS
dc6f34b3a4994700a2e333df43728701D0iARTSQ6dxiwyMR 10.0.0.1 2021-04-13T12:16:11Z ✔️
v1.0.9-4-debian-pragmatic-a8b16a66b110ebe03bb330cda2600226a3a862d7      
9f3602d1c9244f02b0d6fd2e92933e75zLVg8zSRkyANxHbC 10.0.0.3 2021-04-13T12:24:12Z 🚫

 

From this output, it's evident there's a new machine that hasn't been validated yet by the 🚫 within the status column. We need to manually validate this machine to ensure the LAPI recognizes which machines are authorized to transmit signals.

Note: If you don't see a new machine marked with a 🚫 in the status column, make sure you are executing the command on the LAPI server.

bash
sudo cscli machines validate 9f3602d1c9244f02b0d6fd2e92933e75zLVg8zSRkyANxHbC

Make sure to change the argument following "validate" to correspond with the new machine name displayed in the list output.

Step 2d: Restart the child Log Processor service

On the child Log Processor machine you can run the following command to restart the service:

bash
sudo systemctl restart crowdsec

Then, for each machine you wish to connect, repeat step 2. In our case, we will perform this action twice, once for each Ubuntu machine.

Step 3: Setting up Remediation

Now, it's important to configure remediation measures for your internet-facing servers since merely running the Log Processor does not implement enforcement actions. In this article, we'll focus on setting up the Linux firewall Remediation Component. For additional remediation options, be sure to explore the extensive list available in the CrowdSec Documentation.

Step 3a: Generating API key on LAPI

First, we'll create API token on the LAPI server by executing the following command:

bash
sudo cscli bouncers add server-2-firewall
Api key for 'server-2-firewall':

  02954e85c72cf442a4dee357f0ca5a7c

Please keep this key since you will not be able to retrieve it!

I used server-2-firewall as the name for the key, but you can choose any name you prefer. It's crucial to select a descriptive name for the key to facilitate future management, especially if you need to revoke a key due to a token compromise.

Step 3b: Install the Remediation Component

IPtables firewall is among the most commonly used on Linux, so we'll proceed to install the Component that interacts with it, using the apt package manager.

bash
sudo apt install cs-firewall-bouncer-iptables

Once the Component is installed, we will edit the configuration under /etc/crowdsec/bouncers/crowdsec-firewall-bouncer.yaml to point towards the LAPI

yaml
api_url: http://10.0.0.1:8080/
api_key: 02954e85c72cf442a4dee357f0ca5a7c

Ensure you modify the api_url to align with your LAPI address and update the api_key to the one generated by the previous command. Remember you can use either the IP address or the hostname. Once you have altered the configuration let’s restart the firewall Remediation Component.

bash
sudo systemctl restart crowdsec-firewall-bouncer

Then, for each Remediation Component you wish to connect, repeat step 3. In our case, we will perform this action twice, once for each firewall on the Ubuntu machines. Make sure to alter the naming scheme of the api key.

A few closing thoughts

This guide illustrated the process for establishing a multi-server Security Engine setup. While this example utilized three servers, the architecture allows for easy expansion. The resource consumption on server-2 and server-3 remains minimal since the majority of operations are directed towards server-1, facilitating straightforward scalability of the system:

  • Register and validate additional Security Engines on the LAPI server
  • Add any additional Remediation Components

As previously stated, there's no requirement for the Remediation Components and Security Engines to be installed on the same server. This implies that the Security Engine should be installed at the location where logs are produced, whereas the Remediation Component can be deployed at any desired location.

It's important to note that this configuration comes with certain limitations:

  • The communication between Security Engines occurs via unencrypted HTTP, which is suitable for a local network but not secure for internet use. However, the CrowdSec Security Engine supports the use of HTTPS for these interactions.
  • This article does not delve into monitoring or alerting. Nonetheless, the Security Engine supports comprehensive monitoring capabilities via Prometheus, and you can find more detailed information about it in this article.
  • Having both the CrowdSec LAPI and PostgreSQL on server-1 creates a single point of failure, potentially leading to delays in threat response should any issues arise with the server.

Now you may be wondering — how do I build a highly available multi-server CrowdSec setup? We will have a dedicated article on that in the coming weeks, so stay tuned!

We are always more than happy to receive your feedback! Don’t hesitate to reach out to us on our community platforms on Discord and Discourse.

Manuel defended his PhD on Quantum Key Distribution in 2009 and worked as SRE for a few years before becoming involved in security software. He joined CrowdSec early 2021 as a member of its core team and is dedicated to product development 24/7.

Load Disqus comments