Web Administration Scripts
During the past month or so, I've also been dealing with an aggressive DDOS (that's a "distributed denial of service") attack on my server, one that's been a huge pain, as you might expect. What's odd is that with multiple domains on the same server, it's one of my less-popular sites that seems to have been the target of the attacks.
So, that's the jumping off point for this article's scripts: analyzing log files to understand what's going on and why.
To start, a handy check is to see how many processes are running, because my DDOS was characterized by a ridiculous number of comment and search scripts being triggered—hundreds a minute. How to check?
ps command offers a list of running processes at any given time,
but for many versions, all you see is the Web server "httpd" without any
further details. The
-C cmd flag narrows down output only to those
processes, like this:
: ps -C httpd PID TTY TIME CMD 20225 ? 00:13:21 httpd 28162 ? 00:00:01 httpd ... 5681 ? 00:00:00 httpd 5683 ? 00:00:00 httpd <defunct> ]]>
(Note the "defunct" process that's about to vanish.)
So one easy test is to see how many httpd processes are running:
$ ps -C httpd | wc -l 108
That seems like a lot, but this server is hosting several sites, including the super-busy AskDaveTaylor.com tech-support site, which sees more than 100k hits/day. So how does this vary over time? Hmm...still working on the command line:
$ while /bin/true > do > ps -C httpd | wc -l > sleep 5 > done 108 107 103 99 94 91 87 84 91 121 120 116
So there's a max of 121 and a min of 87. But, what if I actually want to analyze this and get min, max and average over a longer period of time? Here's how I solve it:
#!/bin/sh # Calculates the number of processes running that matches # a set pattern over time, producing min, max and average. min=999; max=0; average=0; tally=0; sumtotal=0 pattern="httpd" # ps -C pattern while /bin/true do count=$(ps -C $pattern | wc -l) tally=$(( $tally + 1 )) if [ $count -gt $max ] ; then max=$count fi if [ $count -lt $min ] ; then min=$count fi sumtotal=$(( $sumtotal + $count )) average=$(( $sumtotal / $tally )) echo "Current ps count=$count: min=$min, max=$max, tally=$tally ↪and average=$average" sleep 5 # seconds done exit 0
Notice in the script that I'm not falling into the trap of calculating the
average by having a running average and somehow factoring in the latest value as
a diminishing additive, but instead I use a
sumtotal variable that keeps
having the latest processor count added. That divided by
always the average, although at some point this probably would be greater than
MAXINT (2**32) and would start to produce bad results. On a modern computer,
however, that should take a while. (And the quantum, the period of time between
iterations, also can be adjusted. Five seconds might be too granular for a
process that's going to be run for hours or even days.)
The following are the first few lines of output. Notice how the
max vary as the different values are calculated:
sh processes.sh Current ps count=132: min=132, max=132, tally=1 and average=132 Current ps count=128: min=128, max=132, tally=2 and average=130 Current ps count=124: min=124, max=132, tally=3 and average=128 Current ps count=123: min=123, max=132, tally=4 and average=126
If I let the script run for a longer period of time, the values become a bit more varied:
Current ps count=90: min=76, max=150, tally=70 and average=107
During the 15 minutes or so that I ran the script, an average of 107 "httpd" processes were running, with a minimum of 76 and a max of 150.
Armed with that information, another script could keep an eye on things via a cron job, like this:
#!/bin/sh # DDOS - keep an eye on process count to # detect a blossoming DDOS attack pattern="httpd" max=200 # avoid false positives admin="email@example.com" count="$(ps -C $pattern | wc -l)" if [ $count -gt $max ] ; then echo "Warning: DDOS in process? Current httpd count = ↪$count" | sendmail $admin fi exit 0
That's a superficial solution, however, and it has two problems: 1) what I'd really like is to be able to identify the potential DDOS based on processor count and watch to see if it's sustained over the next few invocations of the script, and 2) once it's triggered, if it is a DDOS, in addition to everything else, I'll also start drowning in e-mail from this script saying essentially the same thing each time. Not good.
What the script needs is contextual memory so it can differentiate between a sudden spike in traffic and a persistent DDOS attack. In the former case, the script might trigger positive, then the next time it runs, it's all within acceptable limits again. In the latter case, once the attack starts, it'll probably just accelerate.
That's the opposite of the e-mail non-repeat condition though, because in the latter case, I want to know that the e-mail has been sent and not send it again within, say, a 60-minute window.
I'll dig in to both of those situations another time. For now, I need to get back to my server and keep bringing things back on-line, program by program, to try to avoid any problems. Stay tuned!
Dave Taylor has been hacking shell scripts for over thirty years. Really. He's the author of the popular "Wicked Cool Shell Scripts" and can be found on Twitter as @DaveTaylor and more generally at www.DaveTaylorOnline.com.
- The Ubuntu Conspiracy
- A First Look at IBM's New Linux Servers
- Vigilante Malware
- Disney's Linux Light Bulbs (Not a "Luxo Jr." Reboot)
- Vagrant Simplified
- Libreboot on an X60, Part I: the Setup
- System Status as SMS Text Messages
- Dealing with Boundary Issues
- Bluetooth Hacks
- Non-Linux FOSS: Code Your Way To Victory!