Text Manipulation with sed
The filter sed can process text from standard input and write its results to standard output. The input can be redirected from a file, and the output also can be redirected to a file using your shell's redirection capabilities. It has hundreds of uses, and once you learn sed, you really would miss it if you lost it.
sed can append lines, remove lines, change lines, rearrange lines, substitute text strings and more. Using sed, you can write simple scripts that can become powerful text manipulating commands.
sed can use regular expressions to define what processing will occur on lines of text and which lines it processes. If you have never seen or used regular expressions before, you may want to become familiar with the basic syntax of regular expressions. In this article, we use a few regular expressions to make sed do some simple text processing.
sed can be run on the command line as follows:
cat sample.txt | sed -e '1,15d'
You can cat the file sample.txt and use the pipe to redirect its output (the lines of text) into the sed command. The -e option to sed tells it to use the next item as the sed command. The d command tells sed to delete lines 1–15 of the input stream, which in this case is the lines read from sample.txt. The rest of the file (if any) appears on standard output, your terminal window, unless redirected elsewhere.
Also, you simply can specify the input file as a command-line argument, so the above sed command also can be written as:
sed -e '1,15d' sample.txt
You also can tell sed to read commands from a script file by using the [-f script-file] option.
The pattern1 and pattern2 are optional line ranges. Some commands don't use the patterns, some commands use only one and some can use both to specify a range of lines that the sed command can operate on, as we did in our simple example above.
pattern1 and pattern2 can be numbers, in which case they are treated like line numbers. They can also be a regular expression delimited by slashes (/pattern/). When using regular expression patterns, all lines that match the expression are filtered through the sed command.
If no pattern is specified, the sed command operates on every line of input.
The ! causes sed to operate on every line not included in the pattern range. You can change our example above to be:
cat sample.txt | sed -e '1,15!d'
Here are a few basic sed examples. These can all be run right from the command line. Testing and debugging your sed commands individually on the command line before integrating them into a larger script will save you a lot of time that otherwise would be spent debugging the commands from within a running script.
Let's say that you have a file that lists customers called customer.txt. For the following examples, it contains simple lines of text, like this:
Sam Jones Brenda Jones Carl Simon Liz Smith
Let's use some sed commands to manipulate this file. For example, if you want to remove lines containing Carl Simon and update your customer file, you can do the following:
cat customer.txt | \ sed -e '/Carl Simon/d' > customer.txt
The pattern /Carl Simon/ is used by sed as a regular expression and matches every line that has that pattern somewhere on the line. The d command deletes every line that matches the pattern. So, any lines containing Carl Simon are removed from the file.
If you want to perform some type of text substitution on a text file, the s command is probably what you are looking for. It substitutes one text string for another. We tend to use this a lot in our scripts. For example, if Sam Jones calls up and tells you that you should have him listed as Samuel Jones, you can use this command to make the change:
cat customer.txt | \ sed -e 's/Sam Jones/Samuel Jones/' > customer.txt
The s command in sed has three slashes that follow the s. The text between the first and second slash is the pattern you want to match. The text between the second and third slash contains the pattern that you want to substitute for the first pattern. If you wanted all instances of Sam to be Samuel (not just Sam Jones), you could rewrite this example as follows:
cat customer.txt | \ sed -e 's/Sam/Samuel/' > customer.txt
The commands for append (a), replace (c) and insert (i) typically need to have the sed commands specified in a separate script file. For example, say you want to append the line After Brenda right after the line that contains the text Brenda. You can use the a sed command to append the text there. However, you need to put the sed commands in a separate script file, so fire up your favorite editor and create the following sed command file:
# # sed command file (# are comment lines) # # append the line 'After Brenda' # in this customer file # /Brenda/a\ After Brenda
Save this script file as sed1.cmd. Then, to run sed using this script file, use this syntax:
sed -f sed1.cmd customer.txt
You should see the contents of your customer file with the additional line added after the line Brenda Jones. The pattern /Brenda/ (in the sed command file) determine where in the output our appended line appears.
The difference between the append command and the insert command is where the text is added. For the append command, the text is added after the line containing the match. For the insert command, the text is added before the line that contains the match.
Fast/Flexible Linux OS Recovery
On Demand Now
In this live one-hour webinar, learn how to enhance your existing backup strategies for complete disaster recovery preparedness using Storix System Backup Administrator (SBAdmin), a highly flexible full-system recovery solution for UNIX and Linux systems.
Join Linux Journal's Shawn Powers and David Huffman, President/CEO, Storix, Inc.
Free to Linux Journal readers.Register Now!
- Download "Linux Management with Red Hat Satellite: Measuring Business Impact and ROI"
- Client-Side Performance
- Tibbo Technology's Tibbo Project System
- Sony Settles in Linux Battle
- July 2016 Issue of Linux Journal
- Peppermint 7 Released
- Libarchive Security Flaw Discovered
- The Giant Zero, Part 0.x
- Profiles and RC Files
- Git 2.9 Released
With all the industry talk about the benefits of Linux on Power and all the performance advantages offered by its open architecture, you may be considering a move in that direction. If you are thinking about analytics, big data and cloud computing, you would be right to evaluate Power. The idea of using commodity x86 hardware and replacing it every three years is an outdated cost model. It doesn’t consider the total cost of ownership, and it doesn’t consider the advantage of real processing power, high-availability and multithreading like a demon.
This ebook takes a look at some of the practical applications of the Linux on Power platform and ways you might bring all the performance power of this open architecture to bear for your organization. There are no smoke and mirrors here—just hard, cold, empirical evidence provided by independent sources. I also consider some innovative ways Linux on Power will be used in the future.Get the Guide