Monitoring Hard Disks with SMART
It's a given that all disks eventually die, and it's easy to see why. The platters in a modern disk drive rotate more than a hundred times per second, maintaining submicron tolerances between the disk heads and the magnetic media that store data. Often they run 24/7 in dusty, overheated environments, thrashing on heavily loaded or poorly managed machines. So, it's not surprising that experienced users are all too familiar with the symptoms of a dying disk. Strange things start happening. Inscrutable kernel error messages cover the console and then the system becomes unstable and locks up. Often, entire days are lost repeating recent work, re-installing the OS and trying to recover data. Even if you have a recent backup, sudden disk failure is a minor catastrophe.
Many users and system administrators don't know that Self-Monitoring, Analysis and Reporting Technology systems (SMART) are built in to most modern ATA and SCSI hard disks. SMART disk drives internally monitor their own health and performance. In many cases, the disk itself provides advance warning that something is wrong, helping to avoid the scenario described above. Most implementations of SMART also allow users to perform self-tests on the disk and to monitor a number of performance and reliability attributes.
By profession I am a physicist. My research group runs a large computing cluster with 300 nodes and 600 disk drives, on which more than 50TB of physics data are stored. I became interested in SMART several years ago when I realized it could help reduce downtime and keep our cluster operating more reliably. For about a year I have been maintaining an open-source package called smartmontools, a spin-off of the UCSC smartsuite package, for this purpose.
In this article, I explain how to use smartmontools' smartctl utility and smartd dæmon to monitor the health of a system's disks. See smartmontools.sourceforge.net for download and installation instructions and consult the WARNINGS file for a list of problem disks/controllers. Additional documentation can be found in the man pages (man smartctl and man smartd) and on the Web page.
Versions of smartmontools are available for Slackware, Debian, SuSE, Mandrake, Gentoo, Conectiva and other Linux distributions. Red Hat's existing products contain the UCSC smartsuite versions of smartctl and smartd, but the smartmontools versions will be included in upcoming releases.
To understand how smartmontools works, it's helpful to know the history of SMART. The original SMART spec (SFF-8035i) was written by a group of disk drive manufacturers. In Revision 2 (April 1996) disks keep an internal list of up to 30 Attributes corresponding to different measures of performance and reliability, such as read and seek error rates. Each Attribute has a one-byte normalized value ranging from 1 to 253 and a corresponding one-byte threshold. If one or more of the normalized Attribute values less than or equal to its corresponding threshold, then either the disk is expected to fail in less than 24 hours or it has exceeded its design or usage lifetime. Some of the Attribute values are updated as the disk operates. Others are updated only through off-line tests that temporarily slow down disk reads/writes and, thus, must be run with a special command. In late 1995, parts of SFF-8035i were merged into the ATA-3 standard.
Starting with the ATA-4 standard, the requirement that disks maintain an internal Attribute table was dropped. Instead, the disks simply return an OK or NOT OK response to an inquiry about their health. A negative response indicates the disk firmware has determined that the disk is likely to fail. The ATA-5 standard added an ATA error log and commands to run disk self-tests to the SMART command set.
To make use of these disk features, you need to know how to use smartmontools to examine the disk's Attributes (most disks are backward-compatible with SFF-8035i), query the disk's health status, run disk self-tests, examine the disk's self-test log (results of the last 21 self-tests) and examine the disk's ATA error log (details of the last five disk errors). Although this article focuses on ATA disks, additional documentation about SCSI devices can be found on the smartmontools Web page.
To begin, give the command smartctl -a /dev/hda, using the correct path to your disk, as root. If SMART is not enabled on the disk, you first must enable it with the -s on option. You then see output similar to the output shown in Listings 1–5.
The first part of the output (Listing 1) lists model/firmware information about the disk—this one is an IBM/Hitachi GXP-180 example. Smartmontools has a database of disk types. If your disk is in the database, it may be able to interpret the raw Attribute values correctly.
- The Tiny Internet Project, Part I
- SUSECON 2016: Where Technology Reigns Supreme
- Download "Linux Management with Red Hat Satellite: Measuring Business Impact and ROI"
- Bitcoin on Amazon! Sort of...
- Free Today: September Issue of Linux Journal (Retail value: $5.99)
- Android Browser Security--What You Haven't Been Told
- Securing the Programmer
- Epiq Solutions' Sidekiq M.2
- The Many Paths to a Solution
Pick up any e-commerce web or mobile app today, and you’ll be holding a mashup of interconnected applications and services from a variety of different providers. For instance, when you connect to Amazon’s e-commerce app, cookies, tags and pixels that are monitored by solutions like Exact Target, BazaarVoice, Bing, Shopzilla, Liveramp and Google Tag Manager track every action you take. You’re presented with special offers and coupons based on your viewing and buying patterns. If you find something you want for your birthday, a third party manages your wish list, which you can share through multiple social- media outlets or email to a friend. When you select something to buy, you find yourself presented with similar items as kind suggestions. And when you finally check out, you’re offered the ability to pay with promo codes, gifts cards, PayPal or a variety of credit cards.Get the Guide