Change in GRUB menu.lst does not take effect
I'm working on a system (Ubuntu 9.04) which has RAID 10 on 6x1TB disks. Over this there is a LVM setup. I needed to install a new kernel on this system and everything went smoothly. I updated the /boot/grub/menu.lst file to boot with the new kernel.
However, while booting, the newly installed kernel is not seen in the list and the system still boots with the old kernel.
I re-checked the installation logs of the new kernel and there were no errors. I ran 'update-grub' and it selects all the kernels available in /boot. However, when I run 'grub-install' it throws the following error:
/dev/mapper/vg-root does not have any corresponding BIOS drive.
I tried to do this from the grub command line:
grub> find /grub/stage1
grub> find /grub/stage2
grub> find /grub/menu.lst
grub> root (hd0,0)
grub> setup (hd0)
Checking if "/boot/grub/stage1" exists... no
Checking if "/grub/stage1" exists... yes
Checking if "/grub/stage2" exists... yes
Checking if "/grub/e2fs_stage1_5" exists... yes
Running "embed /grub/e2fs_stage1_5 (hd0)"... failed (this is not fatal)
Running "embed /grub/e2fs_stage1_5 (hd0,0)"... failed (this is not fatal)
Running "install /grub/stage1 (hd0) /grub/stage2 p /grub/menu.lst "... succeeded
However, it still doesn't work. The groot in menu.lst is shown as "groot=(hd0,0)" (used by update-grub) and the /boot is on LVM:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/vg-root 19223252 1140336 17106432 7% /
.. and the device.map file looks like:
I'm running out of ideas. Any help on this will be highly appreciated.
- Linux Kernel Testing and Debugging
- NSA: Linux Journal is an "extremist forum" and its readers get flagged for extra surveillance
- Tails above the Rest, Part III
- Wanted: Your Embedded Linux Projects
- RSS Feeds
- The 101 Uses of OpenSSH: Part I
- Tails above the Rest: the Installation
- Dolphins in the NSA Dragnet
- Are you an extremist?
- Tails above the Rest, Part II