Raspberry Pi: the Perfect Home Server


The first order of business is to get the external storage device mounted. Use dmesg to look for where the storage device was found—it almost certainly will be /dev/sda. I like using automounter to handle mounting removable storage devices, as it is more flexible about handing devices that may not be present or ready at boot time:

>> sudo apt-get install autofs
>> sudo nano -w /etc/auto.master 
/misc /etc/auto.misc

>> sudo nano -w /etc/auto.misc

Note, my external storage device is formatted with ext4—modify this for your needs if required:

storage         -fstype=ext4            :/dev/sda1
>> sudo /etc/init.d/autofs restart 
>> ls -lat /misc/storage 

Optionally, create a symlink to shorten the path a smidgen:

>> ln -s /misc/storage /storage

Backup Repository

At the top of any home server feature list is providing rock-solid backups. With the RPi, this is pretty simple, due to the wide range of network-sharing options in Linux: Samba/CIFS for Windows machines, NFS for UNIX-based devices and even SFTP for more advanced backup clients like deja-dup. Because the RPi has only 100Mb Ethernet, and the storage device is on USB, it's not going to have super-fast transfer speeds. On the other hand, good backup clients run automatically and in the background, so it's unlikely that you'll notice the slightly slower transfer speeds.

My home network includes one Windows 7 machine. For it, I exported a backup directory on the RPi's external USB storage device via Samba. Because the backup utility in the basic version of Windows 7 doesn't support network drives as a backup destination, I used SyncBack Free to set up automated, daily backups.

Configuring Samba is simple.

1) Install the samba and common-bin library (which has the smbpasswd utility):

>> sudo apt-get install samba samba-common-bin

2) Use smbpasswd to let your local ID have access:

>> sudo smbpasswd -a YOURUSERIDHERE

3) Edit the samba configuration file:

>> sudo nano -w /etc/samba/smb.conf

4) Change the workgroup = WORKGROUP line to match your Windows workgroup name.

5) Comment out or delete the [homes] and [printers] share. (Printer sharing will be done later via direct CUPS access.)

6) Add an entry for the Windows backup paths. Here's my example, which I placed at the bottom of the file:

comment=Backup for windows PC
create mask=0777 
directory mask=0777 

7) Restart Samba to implement your edits:

>> sudo /etc/init.d/samba restart

8) Test connectivity from the Windows machine by mapping a network drive from the file explorer.

For Linux devices, deja-dup is brilliantly simple to set up and use. It's been installed by default on both my Fedora 18 and Ubuntu 12.10 installs. While the package name is "deja-dup", the front end is simply called "Backup". Although the RPi easily could support NFS export, I've found that using deja-dup's SSH option is easier and more portable, and it eliminates the need for an additional service on the RPi. Specifying a deja-dup encryption password is probably a good idea, unless you like the idea of all your files walking off if someone pockets the storage drive:

>> sudo mkdir /storage/linuxlaptop
>> sudo chown -R YOURUSERIDHERE:YOURUSERIDHERE /storage/linuxlaptop

From the client Linux machine, launch the backup utility, choose "SSH" as the backup location, and enter the RPi's IP address and the storage location you just created. The first backup will be slow, but future runs will be sending only incremental changes, which is significantly faster.

Figure 2. Deja-dup Client Setup

Multimedia Server: DLNA

Now that everyone's files are backed up safely, let's move on to some fun! A DLNA server will give you a central place to store your movies, music and pictures. From this central repository, DLNA clients from every screen in the house can play back this content with ease.

At least, that's the promise. The reality is that the DNLA specs don't quite nail down many important things like which formats or encodings are supported. Each client typically has a slightly different idea of what formats and server features it would like to support. A much higher-power server might be able to transcode local content to device-supported formats on the fly, but that's not possible on the RPi, and the on-the-fly transcoding often messes up other features like pause, fast-forward and rewind. In general, higher-powered devices like the PS3, Xbox and WD TV devices can handle most formats without any transcoding. Lower-end devices like smart TVs or Blu-ray players support a much more limited list of codecs.

For the RPi, your best bet is simply to encode to the standards your primary DLNA device supports and then test your other DLNA clients. If they won't play nicely, the tips in the next section may help. In my case, my PlayStation 3 acts as the DLNA client, which plays nicely with the compact .m4v files generated by Handbrake.

Minidlna is a great choice for the RPi DLNA server. It's already in the Raspbian distribution, is quite simple to set up and uses minimal server resources while running:

>> sudo apt-get install minidlna
>> sudo nano  -w /etc/minidlna.conf

Here are the relevant sections of my /etc/minidlna.conf:

# I found keeping video + audio in different paths helpful
# Since I add new media infrequently, turning off 
# inotify keeps minidlna for polling for 
# content changes. It's simple enough to run 
# sudo /etc/init.d/minidlna force-reload
# when new content is added.

Once done editing, tell minidlna to restart and rescan for content:

>> sudo /etc/init.d/minidlna force-reload

Minidlna has the ability to provide movie-poster thumbnails for your movies for devices that support it (like the PS3). It makes finding a specific movie when scrolling through dozens of movie files much more convenient. I've found that the most compatible file layout is to have one directory per movie, containing just the movie file plus the thumbnail image named "Cover.jpg". Using a format like "MovieName.m4v" and "MovieName.jpg" works fine for the PS3, but it breaks VLC (if you can convince the VLC uPNP plugin to find the server in the first place).

From the PS3, you can test connectivity by going to "Video" on the XMB bar. The "friendly_name" you set previously should be visible when scrolling down in the Video section. If you cant find it, test to ensure that Minidlna is up by going to with a Web browser.

Multimedia for Non-DLNA Devices

Once you get DNLA working with some of your devices, you may find devices it doesn't want to work with, so a multimedia plan B is a good idea. The nginx Web server has an MP4 plugin that tries to improve streaming over plain-old HTTP, but browser playback performance varied widely, and fast-forwarding within a movie didn't work consistently either. It seems like the lowest common denominator for multimedia sharing across fussy or non-DLNA devices is a good-old-fashioned Samba share with guest read-only access.

Here's an sample section from /etc/samba/smb.conf:

read only=yes 

After defining the share and restarting Samba (sudo /etc/init.d/samba restart), you can start to test out your clients.

I tested the following clients with a mix of videos encoded with Handbrake as m4v files:

  • Android 4.0.4 phone: "ES File Explorer" with "ES Media Player" (player comes with install).

  • Android 4.1.2 tablet: "ES File Explorer" with "ES Media Player" (player comes with install).

  • Linux devices: automount ://, then use VLC or MPlayer.

  • Windows: mount //, then use VLC.

All devices were able to start playing almost instantly and fast-forward with no delays.

Print Server

The RPi runs CUPS quite well, so it's easy to share an older printer that doesn't have native networking features.

Install CUPS and any packages needed by your printer. I needed hplip-cups since I have an HP inkjet printer:

>>  sudo apt-get install cups hplip-cups

Update the "Listen" line and add the Allow @LOCAL block to the Location directives as shown below (so you can use other machines on your LAN to administer CUPS):

#Listen localhost:631  #Comment this out
Listen #Add this line
<Location /> 
  Order allow,deny 
  Allow @LOCAL 

# Restrict access to the admin pages... 
<Location /admin> 
  Order allow,deny 
  Allow @LOCAL 

# Restrict access to configuration files... 
<Location /admin/conf> 
  AuthType Default 
  Require user @SYSTEM 
  Order allow,deny 
  Allow @LOCAL 

Add your local ID to the lpadmin group so you can administer CUPS:

>> sudo usermod -a -G lpadmin  YOURUSERIDHERE

Restart CUPS:

>> sudo /etc/init.d/cups restart

Then, go to and click "Adding Printers and Classes" to set up your printer. My printer was auto-discovered on the USB, so all I had do to was click "share". Also access, and make sure to check "Share printers connected to this system".

Once you're done, you can set up your clients the usual way. My Linux clients auto-discovered the printer and picked the right printer drivers once I entered the hostname. On my Windows 7 machine, once I selected "Network Printer", I had to click "The printer that I want isn't listed", select "Select a shared printer by name" and then enter the URL from the CUPS Web interface:


With a minimal amount of additional hardware and configuration, the Raspberry Pi can be a highly capable, compact home server. It can bring the wide range of enterprise services offered by Linux into a home environment with minimal hardware expense.



Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

Raspberry Pi server

Damiann's picture

The Raspberry Pi is a great little machine for a variety of uses.
I bought mine at first for the novelty of it. I connected it to my old TV; it was cool browsing the web on it. After the novelty of having a PC connected to my old CRT TV, i installed RaspBMC on it and now it is a multimedia center on the old TV.

Reply to comment | Linux Journal

http://www.hdpvr.fr's picture

My brother recommended I might like this web site.
He was entirely right. This post truly made my day.
You can not believe simply how so much time I had spent for this info!

Power Outages

FedaykinWolf's picture

I've had a dream of making myself a Raspberry Pi server, but a couple unexpected power outages made the PI unbootable... I simply had to re-install the OS, but this kinda destroyed my want to use it as a server... Have you tested an improper shutdowns? Or, have you figured out a way around this potential issue, or is this a unique issue for me and my setup?

Thanks for keeping the dream alive ;)


Power outage and RPi

n1zhi's picture

I'd just power the unit from a battery-sourced outlet on a UPS: uninterruptible power source. TrippLite make some very good units (I'm not affiliated with the company) at reasonable prices.

One more suggestion

Brian Trapp's picture

The read-only suggestion mentioned above is a good one, but even without that I haven't seen any corruption even at a power outage. Maybe your flash card is underperforming? One thing to check - if you have an attached, large hard drive (like I suggested for storage) the system may be doing an extended fsck at boot, making it appear unresponsive. You can confirm by attaching a monitor or by listening for hard drive activity.

readonly root file system

Rob van der Linde's picture

You might want to look into using a readonly root file system to reduce writes to the SD card. I have done something similar in the past with a USB flash drive running Ubuntu server.

I have found this guide for Raspbian that might help


The other thing you can do is create an image of the SD card using dd when everything is running nicely, and if your system fails to boot, you can easily restore the SD card from image file.

Geek Guide
The DevOps Toolbox

Tools and Technologies for Scale and Reliability
by Linux Journal Editor Bill Childers

Get your free copy today

Sponsored by IBM

Upcoming Webinar
8 Signs You're Beyond Cron

Scheduling Crontabs With an Enterprise Scheduler
11am CDT, April 29th
Moderated by Linux Journal Contributor Mike Diehl

Sign up now

Sponsored by Skybot