OpenLDAP Everywhere Reloaded, Part I
One last note on the DHCP failover protocol: if you have more devices on one subnet than 50% of the overall amount available in the pool range, seriously consider re-engineering your network before implementing DHCP failover.
The protocol inherently relies on having an excess of free addresses
to allocate, even after the pool range is cut in half by
The maximum amount of available IP addresses for DHCP in a C Class subnet most of the time is 253 (255 addresses, minus 1 address for broadcast, minus 1 address for the router).
If you have more than 126 devices within one failover subnet, either split it into more subnets (for example, one subnet for each floor of the building), or use a larger subnet than C Class. Configure the subnet declaration in /etc/dhcpd.conf to increase its pool range accordingly. It will save you problems later on.
Now that the DHCP servers are configured with failover pools, the final thing to do is configure the 192.168.3.0/24 and 192.168.4.0/24 to forward DHCP client broadcasts through the LAN/WAN to 192.168.1.10 and 192.168.2.10.
This is done on router03.example.com with IP Helper addresses. On linux03.example.com, it's done with ISC's DHCP Relay Agent.
Assume router03.example.com is a Cisco Catalyst Multi-layer
Switch. Configure IP Helper addresses by entering privileged mode
enable command). Using the
apply the two DHCP server IP addresses to the router interface that has
the 192.168.3.1/24 address. On the Catalyst 3750G in my lab, this is
interface "vlan20". The commands are applied like so:
router03#show running-config Building configuration... --- output suppressed --- interface Vlan20 description linuxjournal_vlan ip address 192.168.3.1 255.255.255.0 end --- output suppressed --- router03#configure terminal router03(config)#interface vlan 20 router03(config-if)#ip helper-address 192.168.1.10 router03(config-if)#ip helper-address 192.168.2.10 router03(config-if)#end router03#copy running-config startup-config Destination filename [startup-config]? Building configuration... [OK] 0 bytes copied in 8.715 secs (0 bytes/sec) router03#show running-config interface vlan 20 Building configuration... Current configuration : 154 bytes ! interface Vlan20 description linuxjournal_vlan ip address 192.168.3.1 255.255.255.0 ip helper-address 192.168.1.10 ip helper-address 192.168.2.10 end router03#
On linux03.example.com, you need to install the isc-debian-relay package. Once it's installed, it will ask for the "multiple server names be provided as a space-separated list". Enter "linux01.example.com linux02.example.com", or if this host isn't configured to resolve from our DNS server pair, "192.168.1.10 192.168.2.10". It will ask on which interface to listen. If you have no preference, leave it blank and press Enter. It will ask you to specify additional options, but you simply can press Enter.
If you make a mistake, you can reconfigure by running the command
dpkg-reconfigure isc-dhcp-relay or modify the
SERVERS variable in
Your DHCP clients now should be able to contact either DHCP server.
In Part II of this series, I'll explain how to configure OpenLDAP on the two Linux servers and start to populate the directory with data.
Example configuration files for this article: ftp://ftp.linuxjournal.com/pub/lj/listings/issue216/11148.tgz
Debian GNU/Linux: http://www.debian.org/distrib
Download Debian 18.104.22.168: http://cdimage.debian.org/debian-cd/22.214.171.124
Manual Page for ntp.conf(5): http://linux.die.net/man/5/ntp.conf
Manual Page for named.conf(5): http://linux.die.net/man/5/named.conf
Manual Page for dhcpd.conf(5): http://linux.die.net/man/5/dhcpd.conf
Manual Page for dhcp-options(5): http://linux.die.net/man/5/dhcp-options
ISC dhcp-users Mailing List: https://lists.isc.org/mailman/listinfo/dhcp-users
Cisco IOS 12.3 T Command Reference for Idle through IP local-proxy-arp
ip helper-address): http://www.cisco.com/en/US/docs/ios/12_3t/ip_addr/command/reference/ip1_i1gt.html
Stewart Walters is a Solutions Architect with more than 15 years' experience in the Information Technology industry. Amongst other industry certifications, he is a Senior Level Linux Professional (LPIC-3).
|Nativ Disc||Sep 23, 2016|
|Android Browser Security--What You Haven't Been Told||Sep 22, 2016|
|The Many Paths to a Solution||Sep 21, 2016|
|Synopsys' Coverity||Sep 20, 2016|
|Naztech's Roadstar 5 Car Charger||Sep 16, 2016|
|RPi-Powered pi-topCEED Makes the Case as a Low-Cost Modular Learning Desktop||Sep 15, 2016|
- Android Browser Security--What You Haven't Been Told
- Nativ Disc
- Download "Linux Management with Red Hat Satellite: Measuring Business Impact and ROI"
- The Many Paths to a Solution
- Naztech's Roadstar 5 Car Charger
- Synopsys' Coverity
- Securing the Programmer
- RPi-Powered pi-topCEED Makes the Case as a Low-Cost Modular Learning Desktop
- Glass Padding
- Jose Dieguez Castro's Introduction to Linux Distros (Apress)
With all the industry talk about the benefits of Linux on Power and all the performance advantages offered by its open architecture, you may be considering a move in that direction. If you are thinking about analytics, big data and cloud computing, you would be right to evaluate Power. The idea of using commodity x86 hardware and replacing it every three years is an outdated cost model. It doesn’t consider the total cost of ownership, and it doesn’t consider the advantage of real processing power, high-availability and multithreading like a demon.
This ebook takes a look at some of the practical applications of the Linux on Power platform and ways you might bring all the performance power of this open architecture to bear for your organization. There are no smoke and mirrors here—just hard, cold, empirical evidence provided by independent sources. I also consider some innovative ways Linux on Power will be used in the future.Get the Guide