More PXE Magic
In this article, I've decided to follow up on a topic I wrote about not in my column directly, but as a feature article called "PXE Magic" in the April 2008 issue. In that article, I talk about how to set up a PXE server from scratch, including how to install and configure DHCP and TFTP. Ultimately, I even provide a basic pxelinux configuration to get you started. Since then, PXE menus with pxelinux have become more sophisticated and graphical and could seem a bit intimidating if you are new to it. In this column, I explain how to piggyback off of the work the Debian and Ubuntu projects have done with their PXE configuration to make your own fancy PXE menu without much additional work. I know not everyone uses Debian or Ubuntu, so if you use a different distribution, hold off on the angry e-mail messages; you still can use the PXE configuration I'm showing here for your distro, provided it gives some basic examples of how to PXE boot its installer. Just use these steps as a launching off point and tweak the PXE config to work for you.
Simple Ubuntu PXE Menu
If this is your first time configuring a PXE server, for the first step, I recommend following my steps in the "PXE Magic" article to install and configure DHCP and TFTP. Otherwise, if you have existing servers in place, just make sure that DHCP is configured to point to your TFTP server (if it's on the same machine, that's fine). And, if you already have any sort of pxelinux configuration in your tftpboot directory, I recommend that you back it up and move it out of the way—I'm going to assume that your entire /var/lib/tftpboot (or /tftpboot on some systems) directory is empty to start with. For the rest of this article, I reference /var/lib/tftpboot as the location to store your PXE configuration files, so if you use /tftpboot, adjust the commands accordingly.
Both Debian and Ubuntu provide a nice all-in-one netboot configuration for each of their releases that makes it simple to PXE boot a particular release yourself. The file is called netboot.tar.gz and is located in a netboot directory along with the rest of the different install images. For instance, the netboot.tar.gz for the i386 Ubuntu 12.04 release (named Precise) can be found at http://us.archive.ubuntu.com/ubuntu/dists/precise/main/installer-i386/current/images/netboot/netboot.tar.gz.
To get started,
cd to your tftpboot directory, and
wget to pull
down the netboot.tar.gz file (I'm assuming you'll need root permissions
for all of these steps, so I'm putting
sudo in front
of all of my commands),
and then extract the tarball:
$ cd /var/lib/tftpboot $ sudo wget http://us.archive.ubuntu.com/ubuntu/dists/precise/ ↪main/installer-i386/current/images/netboot/netboot.tar.gz $ sudo tar xzf netboot.tar.gz $ ls netboot.tar.gz pxelinux.0 pxelinux.cfg ↪ubuntu-installer version.info
ls command shows, an ubuntu-installer directory was created
along with pxelinux.0 and pxelinux.cfg symlinks that point inside
that ubuntu-installer directory to the real files. Without performing
any additional configuration, provided your DHCP and TFTP servers were
functioning, you could PXE boot a server with this configuration and get
a boot menu like the one shown in Figure 1.
Figure 1. Ubuntu Precise PXE Boot Menu
Ubuntu has taken the extra steps of theming its PXE menu with its color scheme and even provided a logo. Unlike the PXE menu I demoed in my previous "PXE Magic" article, this menu functions more like a GUI program. You can use the arrow keys to navigate it, the Enter key to select a menu item and the Tab key to edit a menu entry.
Kyle Rankin is a director of engineering operations in the San Francisco Bay Area, the author of a number of books including DevOps Troubleshooting and The Official Ubuntu Server Book, and is a columnist for Linux Journal.
|September 2015 Video Preview||Sep 01, 2015|
|Using tshark to Watch and Inspect Network Traffic||Aug 31, 2015|
|Where's That Pesky Hidden Word?||Aug 28, 2015|
|A Project to Guarantee Better Security for Open-Source Projects||Aug 27, 2015|
|Concerning Containers' Connections: on Docker Networking||Aug 26, 2015|
|My Network Go-Bag||Aug 24, 2015|
- Optimization in GCC
- Using tshark to Watch and Inspect Network Traffic
- Problems with Ubuntu's Software Center and How Canonical Plans to Fix Them
- Concerning Containers' Connections: on Docker Networking
- A Project to Guarantee Better Security for Open-Source Projects
- Firefox Security Exploit Targets Linux Users and Web Developers
- Where's That Pesky Hidden Word?
- My Network Go-Bag
- Doing Astronomy with Python
- Build a “Virtual SuperComputer” with Process Virtualization