Grive source code is available at GitHub if you want to tinker with it. Setup is a bit of a pain right now, and it requires some command-line work, which is not uncommon in Linux. But, I am here to show you how to install it on RPM-based Linux (CentOS, Fedora and Red Hat).
For starters, you need a dedicated machine or virtual server, as well as a reliable Internet connection.
In this scenario, let's use CentOS. As you may know, CentOS is an enterprise-class Linux distribution derived from sources freely provided to the public by the Upstream OS Provider (http://www.redhat.com/rhel).
I strongly recommend using CentOS 6.0, because CentOS 6.0 has been completely rebuilt with a newer build system and library checks to confirm upstream binary compatibility. It also brings a new kernel, new versions of key server components and improved virtualization support.
Before you install Grive, you need to do some preparatory work. Note: all the following commands must be run as root.
First, update your CentOS. This is optional, but I strongly recommend it. Run the yum command:
[root@system ~]# yum update
Next, disable SELINUX, and simply edit the /etc/selinux/config file:
[root@system ~]# vi /etc/selinux/config
Then add a line like:
Now, you need to enable an extra repository, ATrpms.
ATrpms is a third-party RPM repository. Its original focus was upon software used in natural sciences, especially in the field of high-energy physics, such as tools for numerical programming or for scientific publications. Since then, this repository includes many non-scientific software titles, like system tools or multimedia packages, resulting in a far more generic repository. Currently, packages are built only for Red Hat Linux flavors.
Install and enable ATrpms in CentOS by running the following commands:
[root@system ~]# cd /tmp [root@system ~]# wget http://packages.atrpms.net/RPM-GPG-KEY.atrpms [root@system ~]# wget http://dl.atrpms.net/el6Server-i386/atrpms/ ↪stable/atrpms-repo-6-5.el6.i686.rpm [root@system ~]# rpm --import RPM-GPG-KEY.atrpms [root@system ~]# rpm -ivh atrpms-repo-6-5.el6.i686.rpm
Next, you must run the following commands to install the required packages:
[root@system ~]# yum install automake autoconf \ openssl openssl-devel json-c json-c-devel curl \ curl-devel libcurl-devel libcurl libarchive \ libarchive-devel libidn libidn-devel expat \ expat-devel binutils binutils-devel
CMake is a cross-platform build system generator. CMake is used to control the software compilation process using simple platform- and compiler-independent configuration files. Check your CMake package version:
[root@system ~]# rpm -qa | grep -i cmake
If the version of CMake is <2.8, you need to update the CMake package by running the following commands:
[root@system ~]# yum remove cmake [root@system ~]# yum install cmake \ --disablerepo=* --enablerepo=atrpms-testing
Boost provides free peer-reviewed portable C++ source libraries. Boost libraries are intended to be widely useful and usable across a broad spectrum of applications.
Now, check your Boost package version:
[root@system ~]# rpm -qa | grep -i boost
If the version of Boost is <1.46, you need to update the Boost package by running the following commands:
[root@system ~]# yum remove boost boost-devel [root@system ~]# cd /tmp [root@system ~]# wget http://sourceforge.net/projects/boost/ ↪files/boost/1.49.0/boost_1_49_0.tar.gz/download [root@system ~]# tar -xvf boost_1_49_0.tar.gz [root@system ~]# cd boost_1_49_0 [root@system ~]# ./bootstrap.sh --prefix=/usr [root@system ~]# ./b2 install
Installing the Boost libraries will take up to 15 minutes, depending on your hardware, so be patient.
Make sure your system time and date are correct. Run the following command if required:
[root@system ~]# ntpdate -b -p 8 -u pool.ntp.org
With all the pieces in place, you are ready to install Grive. The project's Web site offers access to the source code using Git. To download Grive, run:
[root@system ~]# cd ~ [root@system ~]# mkdir -p ~/.grive [root@system ~]# cd /tmp [root@system ~]# git clone https://github.com/Grive/grive.git [root@system ~]# cd grive [root@system ~]# cmake \ -DCMAKE_INSTALL_PREFIX:PATH=/usr . [root@system ~]# make all install
The first time you run Grive, use the
-a argument to grant
permission to Grive to access to your Google Drive. The
-a option is
needed only the very first time you run Grive:
[root@system ~]# cd ~/.grive/ [root@system ~]# /usr/bin/grive -a
After running the command above, a URL should be displayed in the terminal—copy that URL and paste it in a Web browser.
You will need to log in to your Google account if you have not done so. In the newly loaded page, you will be asked to give Grive permission to access your Google Drive, and after clicking "Allow access", an authentication code will be displayed. Copy this code and paste it in the terminal where you ran Grive:
----------------------- Please go to this URL and get an authentication code: https://accounts.google.com/o/oauth2/auth?scope= ↪https%3A%2F%2Fwww.googleapis.com%2Fauth%2Fuserinfo.email ↪+https%3A%2F%2Fwww.googleapis.com%2Fauth%2Fuserinfo.profile ↪+https%3A%2F%2Fdocs.google.com%2Ffeeds%2F ↪+https%3A%2F%2Fdocs.googleusercontent.com%2F ↪+https%3A%2F%2Fspreadsheets.google.com%2Ffeeds ↪%2F&redirect_uri=urn:ietf:wg:oauth:2.0:oob ↪&response_type=code&client_id= ↪22314510474.apps.googleusercontent.com ----------------------- Please input the authentication code here
That's it. Now, each time you want to sync Google Drive with your local
grive folder, navigate to the .grive folder and run
(this time without the
-a, because you already have authenticated Grive with
Google Drive). You can set up a cron job if you want to do this on a
If everything works fine, Grive will create a .grive file in your home directory. It also will start downloading files from your Google Drive to your current directory. After all this business is done, all you need to do to refresh your Google Drive files is run Grive from the terminal.
Is it as convenient as Google's official desktop solutions? No, but you are not running Linux because you are looking for easy solutions.
If you get a "crash" (a bunch of error messages on the screen), you should run:
[root@system ~]# /usr/bin/grive -l log.txt
Because the file will contain a log of the sync operation, you may want to edit the file first to remove personally sensitive information and then send it to Grive developers.
Keep up with the posts at https://plus.google.com/116411649000013553715/posts and https://github.com/grive/grive/issues for the latest information, especially regarding news on newly discovered bugs and when you need to download and build again!
The Grive Project—an Open-Source Linux Client for Google Drive: https://github.com/Grive/grive
The Official Google Blog, "Introducing Google Drive": http://googleblog.blogspot.in/2012/04/introducing-google-drive-yes-really.html#!/2012/04/introducing-google-drive-yes-really.html
"Grive: Open Source Google Drive Client for Linux": http://www.webupd8.org/2012/05/grive-open-source-google-drive-client.html
The Google Drive FAQ: http://news.cnet.com/8301-1023_3-57420402-93/the-google-drive-faq
Sayyed Mehdi Poustchi Amin is currently a PhD research student in computer science at SIU. His research is focused on developing honeypot decoys for analysis of Internet attacks. His professional certifications include CCNA, MCTS, MCITP and MCSE.
With all the industry talk about the benefits of Linux on Power and all the performance advantages offered by its open architecture, you may be considering a move in that direction. If you are thinking about analytics, big data and cloud computing, you would be right to evaluate Power. The idea of using commodity x86 hardware and replacing it every three years is an outdated cost model. It doesn’t consider the total cost of ownership, and it doesn’t consider the advantage of real processing power, high-availability and multithreading like a demon.
This ebook takes a look at some of the practical applications of the Linux on Power platform and ways you might bring all the performance power of this open architecture to bear for your organization. There are no smoke and mirrors here—just hard, cold, empirical evidence provided by independent sources. I also consider some innovative ways Linux on Power will be used in the future.Get the Guide
|Happy Birthday Linux||Aug 25, 2016|
|ContainerCon Vendors Offer Flexible Solutions for Managing All Your New Micro-VMs||Aug 24, 2016|
|Updates from LinuxCon and ContainerCon, Toronto, August 2016||Aug 23, 2016|
|NVMe over Fabrics Support Coming to the Linux 4.8 Kernel||Aug 22, 2016|
|What I Wish I’d Known When I Was an Embedded Linux Newbie||Aug 18, 2016|
|Pandas||Aug 17, 2016|
- Happy Birthday Linux
- ContainerCon Vendors Offer Flexible Solutions for Managing All Your New Micro-VMs
- Updates from LinuxCon and ContainerCon, Toronto, August 2016
- New Version of GParted
- What I Wish I’d Known When I Was an Embedded Linux Newbie
- Tor 0.2.8.6 Is Released
- NVMe over Fabrics Support Coming to the Linux 4.8 Kernel
- All about printf
- Blender for Visual Effects
- A New Project for Linux at 25