Designing Electronics with Linux
In many scientific disciplines, the research you may be doing is completely new. It may be so new that there isn't even any instrumentation available to make your experimental measurements. In those cases, you have no choice but to design and build your own measuring devices. Although you could build them using trial and error, having a way to model them first to see how they will behave is a much better choice—in steps oregano. With oregano, you can design your circuitry ahead of time and run simulations on it to iron out any problems you may encounter.
The first step, as always, is installing the software. Most distributions should have a package for oregano available. If you want to follow the source version, it is available at GitHub. Oregano also needs another software package to handle the actual simulation. The two packages it currently can work with are Gnucap and ngspice. Either of these two packages needs to be installed in order to do the calculations for the simulation. While this is handled automagically by your distribution's package manager, you will need to install this dependency yourself if you are building from source.
Once it's installed, you will get a blank new project when you first start up oregano (Figure 1). On the right-hand side, you should see a list of elements you can use to build your circuits. It starts up with the default library selected. This library provides all the standard electronic components you likely will want to use. But, this isn't the only library included. You can select from other libraries, such as TTL, Linear, CPU or Power Devices, among others.
Figure 1. On startup, you get a blank canvas and a parts list.
Each of these libraries contains a list of associated elements you can use in your circuits. Selecting one of the elements shows a preview of the schematic drawing of that element in the bottom window. You then can drag and drop the element onto your canvas and start building your circuit. Once you have an element on the canvas, you can double-click the element to edit its properties (Figure 2). You need to click on the "Draw wires" icon at the top of the window in order to connect the elements together into a proper circuit.
Figure 2. The property window depends on which properties are available for that element.
All circuits have some necessary components to make an actually functioning circuit. The first of these is the ground. This element is labeled GND in the default library. Along with ground, you need some sort of power source. In most cases, you will want some form of DC current. This is provided by the element labeled with VDC in the default library. With those two important elements in your circuit, you can go ahead and wire up the rest of the circuit.
Once you have a circuit made up, you will want to run a simulation to see how it behaves. Because of the nature of electrical circuits, you need to put sensors into the circuit to see its behavior. You can click on the "Add voltage clamp" icon at the the top of the window to select the sensor object. Then, you can click on the areas of your circuit where you want to measure during the simulation. At each point you click, you will see a new icon on your circuit marking a sensor location. Double-clicking on the clamp will pop up a window where you can set the parameters of what is being measured (Figure 3). You need at least one clamp in your circuit before you can run a simulation; otherwise, you won't have any measurements to study in your simulation.
Figure 3. Here you can select the properties for the clamp.
Once you have all of your clamp points selected, you can run the simulation and see what happens by clicking on the "Run a simulation" icon at the top of the window (Figure 4). When you do so, oregano opens a new window where you can see a plot of the data registered by the clamp (usually voltage or current).
Figure 4. Plotting the results of a circuit clamp.
When you do analysis, you have the choice of two different circuit analysis programs: Gnucap and spice. On Ubuntu, the default analysis program that is installed as a dependency is Gnucap. This means you need to install spice explicitly if you want to use it instead.
To select the analysis engine, click on Edit→Preferences. In this dialog, you also can set whether the log window will open automatically when needed, and you can set the data paths for the models and libraries that will be available for your circuits. In most cases, you will want to leave those as is.
To help you get started, oregano comes with several examples. Again, on Ubuntu (since that is my current desktop), these examples are located in /usr/share/doc/oregano/examples. You might want to load one of these examples first.
Once you have a completed circuit and want to run a simulation, you will want to set parameters to control this simulation. Click on the menu item Edit→Simulation Settings to bring up the dialog window. The first tab lets you see analysis parameters, such as transient options, fourier options, DC sweep options and AC options. Clicking on any of the check boxes will open up a subset of further options for each of those sections. The second tab lets you set a series of analysis options. You also can set parameters that may affect your circuit, such as the ambient temperature.
Once you have all of the options and parameters set, you can start the simulation by selecting the menu item Tools→Simulate or by pressing F11. Don't forget to attach some test clamps first; otherwise, you will get an error. Your simulation will run and pop up a new plot window where you can look at the values generated within your circuit. You can select whether to look at the transient analysis or AC analysis.
On the left, you will see a list of available plotting options. On the right-hand side, you will find the actual plot of your data. Only the items that you select from list will be plotted, so that means when this window first opens, nothing actually will be plotted.
You also can plot functions of the available values. For example, you could plot the difference in voltage between two separate test clamps. These functions will be available in the list on the left side, so you can select them and have them plotted on the graph.
Additionally, you can include even more complicated elements like full CPUs to your circuit. The problem with these is that the way they respond to electrical signals can be very complicated. These elements need a separate model file that describes this response to signals. Unfortunately, the licensing for model files means that many cannot be included with oregano. You can search the Internet and download the model files for the elements that interest you, or you can create your own model file. In either case, you can place the model files into the directory set in the preferences.
When you actually want to build your circuit, you can export the associated diagram by clicking on the menu item File→Export. You then can export the circuit diagram as either an SVG file, a PDF, a PostScript file or a PNG. Now, you can go ahead and build your new test equipment, secure in the knowledge that you did some initial testing and should get the behavior you need.
Joey Bernard has a background in both physics and computer science. This serves him well in his day job as a computational research consultant at the University of New Brunswick. He also teaches computational physics and parallel programming.
Webinar: 8 Signs You’re Beyond Cron
On Demand NOW
Join Linux Journal and Pat Cameron, Director of Automation Technology at HelpSystems, as they discuss the eight primary advantages of moving beyond cron job scheduling. In this webinar, you’ll learn about integrating cron with an enterprise scheduler.View Now!
|My Humble Little Game Collection||May 28, 2015|
|New Linux Based OS Brings Internet of Things Closer to Reality||May 27, 2015|
|Non-Linux FOSS: All the Bitcoin, None of the Bloat||May 26, 2015|
|Dr Hjkl on the Command Line||May 21, 2015|
|Initializing and Managing Services in Linux: Past, Present and Future||May 20, 2015|
|Goodbye, Pi. Hello, C.H.I.P.||May 18, 2015|
- My Humble Little Game Collection
- New Linux Based OS Brings Internet of Things Closer to Reality
- Initializing and Managing Services in Linux: Past, Present and Future
- Dr Hjkl on the Command Line
- Using Hiera with Puppet
- Non-Linux FOSS: All the Bitcoin, None of the Bloat
- Infinite BusyBox with systemd
- Gartner Dubs DivvyCloud Cool Cloud Management Vendor
- Goodbye, Pi. Hello, C.H.I.P.
- It's Easier to Ask Forgiveness...