Ye Old Laptop as a Server
Resourceful people can use an old desktop as a server of some sort, but they also may have an old laptop around collecting dust. Although most of today's desktop environment software runs too slowly on these older laptops, you may not want to get rid of yours yet. These cast-offs easily can be transformed not only into a low-power server, but also into a mobile VoIP and Web server.
Let's look a three Linux distros with this in mind and test two different Web servers. The Ye Old Laptop used in this article is a Dell Latitude with a 1.0GHz Intel Pentium III Mobile CPU and 256MB of RAM. Keep in mind that Web 2.0 software may be too much for these old cast-offs. So, if you need to serve the latest-and-greatest flashy content, you're better off buying a new desktop computer. The server configuration I used and tested on every Linux distribution is Apache 1.3.34, Lighttpd 1.4.13, PHP 5 and MySQL Server 5.
Xubuntu is an official Ubuntu distribution for old or slow systems. The main difference between it and Ubuntu is that Xubuntu uses the Xfce window manager instead of GNOME. An X-less Ubuntu or Kubuntu installation should have the same performance results as an X-less Xubuntu. With X running, Xubuntu requires at least 128MB of RAM, but the minimum requirements for the Xubuntu Alternate CD without X are 64MB of RAM. It uses the Ubuntu repositories, which are filled with programs that satisfy nearly every system administrator's needs. I installed Apache 1.3 and Lighttpd 1.4, MySQL Server 5 and PHP 5 with apt-get install apache lighttpd and apt-get install mysql-server-5.0 php5. For some reason, I had to install Apache 2.0 (and all its dependencies) to get PHP to work with Apache 1.3. After I got it working, I then uninstalled Apache 2.0.
After configuring Apache and Lighttpd, I stress-tested the Web server over a 100Mb Ethernet connection with Siege, a benchmarking and HTTP regression-testing utility. It is designed to let Web developers measure the performance of both their code and their servers to see how well the server functions on the Internet under a heavy load. Siege supports basic authentication, the HTTP and HTTPS protocols, and even cookies. This utility allows system administrators to hit their Web server with both a concurrent and configurable number of simulated users.
I generated a 5KB file with dd and ran a stress test with siege 192.168.1.179/5kb -c10 -r10 on a fairly new computer, simulating ten clients refreshing ten times each second (a fairly heavy load). To improve results, I turned off all unneeded services, including Xorg, Samba, the FTP server and the IRC server. If you run Siege with the -b command-line argument, it runs the test without any delay for throughput benchmarking. This means that the server gets all the hits at once (but that isn't a very realistic scenario). Without the -b flag, Siege invokes each simulated user with a delay of at least one second. Table 1 shows the performance differences between Apache 1.3 and Lighttpd 1.4.13.
Table 1. Performance Differences between Apache 1.3 and Lighttpd 1.4.13 on Xubuntu with a 5KB File
|Ten clients, ten hits/second, 5KB file||Apache 1.3||Lighttpd 1.4.13|
|Time elapsed||9 secs||8 secs|
|Server response time||0.06 secs||0.00 sec|
|Transaction rate||11.00 trans/sec||12.5 trans/sec|
|Longest transaction||3.00 secs||0.04 secs|
|Shortest transaction||0.00 secs||0.00 secs|
The tests performed on Xubuntu 7.04 (Table 1) reveal that the transaction rate is high, and the shortest transfer time is about a millisecond or less. (Siege can't calculate anything below a millisecond.) This is mainly because my network consists of only 20 feet of cable. Depending on your connection, testing over the Internet will show a greater latency than over a local network. According to the Siege man page, concurrency is the average number of simultaneous connections. When the number rises, the server performance decreases, especially on slower hardware.
Table 2. Performance Differences between Apache 1.3 and Lighttpd 1.4.13 on Xubuntu with a 1MB File
|Ten clients, ten hits/second, 1MB file||Apache 1.3||Lighttpd 1.4.13|
|Time elapsed||12 secs||12 secs|
|Server response time||0.5 secs||0.4 secs|
|Transaction rate||8.3 trans/sec||8.2 trans/sec|
|Longest transaction||1.30 secs||0.75 secs|
|Shortest transaction||0.1 secs||0.1 secs|
The tests performed on the 1MB file (Table 2) show that under a heavy load, Lighttpd 1.4.13 performs the best with smaller files (such as blog posts without any pictures). Performance, however, is still higher than Apache with 5KB files. Interestingly, the heavier the load, the better Apache performed. Results from tests on 5MB files under a very heavy load of 50 clients at ten connections per second showed a 0.1 second higher response time and a 0.1MB/sec higher throughput than Lighttpd. Lighttpd still had shorter transaction times that were four seconds less than Apache though.
On Xubuntu, Lighttpd is the fastest performing server for static documents, although Apache follows close behind. For best results in Xubuntu, turn off all unneeded services, so that if the server gets a heavy load, it will have a few more resources to improve speed. I found Xubuntu to be quite fast and easy to get running, but there are other distros to consider, such as Vector Linux.
|Designing Electronics with Linux||May 22, 2013|
|Dynamic DNS—an Object Lesson in Problem Solving||May 21, 2013|
|Using Salt Stack and Vagrant for Drupal Development||May 20, 2013|
|Making Linux and Android Get Along (It's Not as Hard as It Sounds)||May 16, 2013|
|Drupal Is a Framework: Why Everyone Needs to Understand This||May 15, 2013|
|Home, My Backup Data Center||May 13, 2013|
- Linux Systems Administrator
- New Products
- Senior Perl Developer
- Technical Support Rep
- UX Designer
- Designing Electronics with Linux
- Dynamic DNS—an Object Lesson in Problem Solving
- Using Salt Stack and Vagrant for Drupal Development
- Making Linux and Android Get Along (It's Not as Hard as It Sounds)
- Have you tried Boxen? It's a
4 hours 39 min ago
- seo services in india
9 hours 10 min ago
- For KDE install kio-mtp
9 hours 11 min ago
- Evernote is much more...
11 hours 11 min ago
- Reply to comment | Linux Journal
19 hours 57 min ago
- Dynamic DNS
20 hours 31 min ago
- Reply to comment | Linux Journal
21 hours 29 min ago
- Reply to comment | Linux Journal
22 hours 19 min ago
- Not free anymore
1 day 2 hours ago
1 day 6 hours ago
Enter to Win an Adafruit Pi Cobbler Breakout Kit for Raspberry Pi
It's Raspberry Pi month at Linux Journal. Each week in May, Adafruit will be giving away a Pi-related prize to a lucky, randomly drawn LJ reader. Winners will be announced weekly.
Fill out the fields below to enter to win this week's prize-- a Pi Cobbler Breakout Kit for Raspberry Pi.
Congratulations to our winners so far:
- 5-8-13, Pi Starter Pack: Jack Davis
- 5-15-13, Pi Model B 512MB RAM: Patrick Dunn
- 5-21-13, Prototyping Pi Plate Kit: Philip Kirby
- Next winner announced on 5-27-13!
Free Webinar: Hadoop
How to Build an Optimal Hadoop Cluster to Store and Maintain Unlimited Amounts of Data Using Microservers
Realizing the promise of Apache® Hadoop® requires the effective deployment of compute, memory, storage and networking to achieve optimal results. With its flexibility and multitude of options, it is easy to over or under provision the server infrastructure, resulting in poor performance and high TCO. Join us for an in depth, technical discussion with industry experts from leading Hadoop and server companies who will provide insights into the key considerations for designing and deploying an optimal Hadoop cluster.
Some of key questions to be discussed are:
- What is the “typical” Hadoop cluster and what should be installed on the different machine types?
- Why should you consider the typical workload patterns when making your hardware decisions?
- Are all microservers created equal for Hadoop deployments?
- How do I plan for expansion if I require more compute, memory, storage or networking?