Standard Operating Procedures for Embedded Linux Systems
Procedures for developing embedded systems are very complicated. New engineers typically take a long time to become familiar with these procedures. Therefore, we have developed a standard operating procedure (SOP) to save the costs of constructing an embedded system and reduce the complexity. The SOP includes five standard procedures for building a Linux-based embedded system, as shown in Figure 1. You can follow the procedures discussed in this article for building a prototypal system. Also, we introduce ten useful methods for downsizing your system. Finally, we show the effect of these methods on downsizing your embedded system—a content-aware network security gateway.
To build an embedded system, the first step is to select a target platform. The platform involves both hardware and software. The hardware platform includes the processor, bus and I/O; the software platform includes the bootloader, kernel and root filesystem. You must select each item in the target platform carefully to ensure that the hardware and software work together. For instance, bootloaders relate directly to the hardware. If the selected bootloader does not support your hardware platform, the whole embedded system cannot power on. Moreover, an operating system that requires MMU may fail to collaborate with MMU-supported processors.
Second, in addition to the target platform, a development platform also is necessary. You cannot compile embedded software programs on the target platform, because the target platform often has a small RAM and slow CPU to minimize cost and power consumption. Therefore, you need to prepare a development platform with a fast CPU and large RAM to compile these programs. Besides, because the two platforms have different hardware architectures, a cross-compiler environment is necessary. Buildroot is such a package to offer this environment. It has a friendly user interface to assist in choosing the hardware platform and the required software package. By using Buildroot, you can generate a cross-compilation toolchain and a root filesystem easily with built-in application packages for your embedded system.
After setting up the environment, the next step is identifying the packages required by your system. You can accomplish this by selecting the built-in packages directly from the menuconfig of Buildroot, or you can download them from the Internet. In fact, Buildroot provides a list of useful packages, such as iproute2, freeswan and squid. Buildroot also ensures that these packages can link successfully with uClibc, a C library with a smaller size than Glibc. If you cannot find the suitable packages, you will have to modify existing packages or write new ones.
Having obtained the required packages, the next step is integrating them into the embedded system. Integrating here means using a cross-compiler to compile the source code into forms that can be executed in the target platform, and then adding them into the root filesystem. You can add packages into the root filesystem through Buildroot in any of three ways, as shown in Figure 2. Method 1 is to select them directly from the options in Buildroot. If the packages are not available in Buildroot, you may need to write a makefile for the package to indicate how to download, configure, compile and install the package. Also, you need to modify the config.in file of Buildroot to display the option of the package in the configuration menu. However, if you would not like to write these configuration files, you can use Method 2. In Method 2, you simply place the compiled packages in the directory named customize, and then Buildroot copies these compiled packages into the root filesystem during the building procedures, according to the rules given in customize.mk. However, if you simply want to verify the functionality of a single package, you don't need to rebuild the whole image. The steps in Method 3 are to mount the root filesystem on any one directory and then copy the compiled packages into the directory. Finally, unmount the directory, and you will get an updated root image. However, Method 3 may fail if the free space in the mounted filesystem is not enough for the new packages. In that case, you can adjust the parameters given in ext2root.mk to reserve more free space in your root filesystem during the period of system development.
Finally, Figure 2 depicts two ways to test and verify whether the functions of a package are normal. The basic way is to download the root filesystem into the target platform and execute the package directly. However, doing this usually takes a long time. Another way is to boot the root filesystem in a virtual machine, such as QEMU and VMware. Using a virtual machine to examine a compiled image is fast and convenient, but a virtual machine may not simulate some characteristics, such as hardware interrupts. Hardware interrupts involve quick reaction behavior, so they cannot be implemented by virtual machines easily. Finally, if the target platform has the same CPU architecture as your development platform, you can use chroot to replace your local system with the target root filesystem.
By following the five procedures outlined, you can build the root filesystem for your embedded system. However, there is still one problem that may be troubling you—how to downsize your embedded systems or how to use less Flash RAM to store the kernel and root filesystem. Requiring less RAM means that you can cut the cost of your embedded system.
|When BirdCam Goes Mainstream||Oct 27, 2016|
|Nightfall on Linux||Oct 26, 2016|
|Daily Giveaway - Fun Prizes from Red Hat!||Oct 25, 2016|
|Installing and Running a Headless Virtualization Server||Oct 25, 2016|
|Ubuntu MATE, Not Just a Whim||Oct 21, 2016|
|Non-Linux FOSS: Screenshotting for Fun and Profit!||Oct 20, 2016|
- Nightfall on Linux
- When BirdCam Goes Mainstream
- Installing and Running a Headless Virtualization Server
- Secure Desktops with Qubes: Compartmentalization
- Ubuntu MATE, Not Just a Whim
- Daily Giveaway - Fun Prizes from Red Hat!
- Build Your Own Raspberry Pi Camera
- Nasdaq Selects Drupal 8
- Polishing the wegrep Wrapper Script