Linux Terminal Servers for Any Business
You can set up an LTS for your business in two core ways.
The first option, an LTSP install, requires more hands-on editing of configuration files. The benefit is that you control every aspect and the Linux flavor used. This is important if you already have an existing Linux server and want to add the power of LTSP.
The second option, a complete distribution install, consumes less time. It also offers the simplicity of including almost every necessary library and package. Two popular options include:
The K12LTSP.org version, which uses the latest Fedora Core.
The Edubuntu.org version, which uses Ubuntu (a Debian-based distribution).
If you don't already use one particular Linux flavor and if you are new to server administration, I strongly recommend that you use one of the ready distributions.
Skip to the next section if you want to use a Complete Distribution of LTSP.
However, for those who are well versed with their flavor of choice, I offer this section. It's a brief summary of tips that may help you over some installation hurdles, regardless of which flavor you've chosen.
Begin your installation by first visiting the LTSP.org Web site and wiki. They include some excellent details regarding various flavors and appropriate installation guides.
The LTSP Installer, on the LTSP.org Web site, works well and expedites the installation process. If you have an Internet connection to the LTS, this offers an optimal solution.
Have the following information ready prior to the installation:
Ethernet device name (eth0, eth1 and so on).
Ethernet MAC address(es).
Server's IP address (to be reserved in the DNS in most cases).
Subnet information (you may need to reserve a subset of IP addresses for LTS).
Router IP for your local area network (not the broadband router).
The libwww-perl package and others—you may need to address the libwww-perl dependency, which Jim McQuillan documented on the LTSP.org Web site. This runs the Perl file that actually installs and preps your LTS (ltspadmin).
Be careful which one you download; numerous iterations exist. For example, there are currently 75 RPMs just for the libwww-perl.
Please use your flavor's package manager—RPM, Synaptic PM or YaST—to add this and a number of other essential packages. This allows you to get many dependencies resolved in one fell swoop.
Set your temptations aside and try not to skip steps in the configuration menu (11 steps total). Some of the steps create essential config files that you will then need to edit or rename. To start, choose Show the status of all services from the main tool menu.
Your LTS must run in runlevel 5 to allow your thin-client connections to use graphics. If your server does not boot into runlevel 5, edit this file: /etc/inittab.
Edit the initialization default line to read:
When running in text mode, most flavors make available both vi and nano editors.
Ensure that you start all services prior to LST configuration. I'll use the DHCP service as an example, because it serves an essential role for an LTS, and you need to familiarize yourself with its configuration.
To force-start the DHCP process, you usually use the commands:
cd /etc/init.d ./dhcp3-server start
On some flavors, you may need to force-start the process with something similar to this:
Now, check your syslog to find out whether DHCP generated any errors:
cd /var/log tail syslog
DHCP will fail if you've incorrectly configured your subnet information.
Edit your DHCP configuration file:
On some flavors, the file may be located here:
I offer some more details regarding declaring a subnet in the Final Prototype Configuration section below.
With some flavors, you also may need to edit a file to declare your network device. Edit the line in /default/dhcpd3-server to include your specific Ethernet card(s), for example:
Most installations and configurations go smoothly without a lot of tinkering. But in case you run into hurdles, I include some of the key file locations below.
LTSP configuration files:
/usr/sbin/ltspcfg: the LTSP configuration tool.
/opt/ltsp/i386/etc/lts.conf: the primary configuration file.
DHCPD on some flavors:
/etc/init.d/dhcp3-server: executable script to start/stop service.
/etc/default/dhcpd3-server: default declaration of Ethernet device.
/etc/dhcp3/dhcpd.conf: the configuration file.
/var/lib/dhcp3/dhcpd.leases: the lease file associating IP leases.
DHCPD on other flavors:
/etc/init.d/dhcpd: executable script to start/stop service.
/etc/dhcpd.conf: the configuration file.
/var/lib/dhcp.leases: the lease file associating IP leases.
Hopefully, this section provided tips for a smooth installation. Now, jump ahead to the Final Prototype Configuration section.
|NTPsec: a Secure, Hardened NTP Implementation||Mar 30, 2017|
|SUSE Linux Enterprise High Availability Extension||Mar 29, 2017|
|Hybrid Cloud Storage Delivers Performance and Value||Mar 29, 2017|
|smbclient Security for Windows Printing and File Transfer||Mar 28, 2017|
|How to Calculate Flash Storage TCO||Mar 27, 2017|
|Non-Linux FOSS: Don't Drink the Apple Kool-Aid; Brew Your Own!||Mar 27, 2017|
- NTPsec: a Secure, Hardened NTP Implementation
- smbclient Security for Windows Printing and File Transfer
- Hybrid Cloud Storage Delivers Performance and Value
- SUSE Linux Enterprise High Availability Extension
- Returning Values from Bash Functions
- Non-Linux FOSS: Don't Drink the Apple Kool-Aid; Brew Your Own!
- William Rothwell and Nick Garner's Certified Ethical Hacker Complete Video Course (Pearson IT Certification)
- HOSTING Monitoring Insights
- Three EU Industries That Need HPC Now
- Hodge Podge