Build a Skype Server for Your Home Phone System
Safely Cutting Your Phone Line
To cut your incoming phone wires safely, you need a pair of wire cutters (or sharp scissors) with insulated handles, a roll of electrical insulation tape, and you need to follow a simple procedure to do the cutting (Figure 6).
Your phone wires are powered by the telephone company; that's why your regular telephone works during a power cut. Now, even if you've had the phone company disconnect you, your phone wires may or may not still have electrical power. Consequently, you must be careful not to short the wires when cutting them. Even a momentary short can be bad news. This can happen if you cut two or more wires at the same time (step 1). The solution is simple, cut only one wire at a time (step 2). As you cut wires, you should insulate their exposed ends with electrical tape (step 3).
Now, if this activity looks to be beyond your comfort zone, you always have the option of calling the phone company and having them send a technician to do the job for you. Even after paying for this to be done, your Skype savings will most likely recoup the cost in very little time.
For those readers who are security-conscious, and don't trust Skype as an application, building a Skype server has an added advantage. By placing the Skype server on your Internet connection outside your firewall, you gain the peace of mind that should a hacker break in to your server, or compromise Skype somehow, then as the server interfaces with nothing more than a copper phone line into your home beyond the firewall, any damage will necessarily be contained and limited to the Skype server outside the firewall. Worst case is that you'll need to do a reinstall on your Skype server, and perhaps, a better job of locking it down from a security point of view so that it can protect itself. Indeed, if your firewall is sufficiently restrictive that Skype won't work on the inside, then placing your Skype server outside your firewall is the only way in which you can take advantage of Skype's phone services.
Phone bills have a lot in common with taxes. Both are mind numbingly complex, and both take a lot and give little in return! To help work out your potential savings from switching to Skype for your phone services, in whole or in part, I've written a spreadsheet that simplifies the process and can be downloaded from the Elpis Web site (see the on-line Resources).
You should factor in the cost of building and running a Skype server into your savings analysis. Running costs will depend on the machine that you choose to use in order to run Skype 24/7. An old clunker of a machine may consume so much power that it would be worthwhile to build a new machine in the long run. As always, run the numbers and make some decisions.
Let's look at the cost of running a small Skype server 24 hours a day, 365 days a year. Without a monitor and other peripherals to guzzle power, a small modern computer typically consumes between 50W and 100W. If your cost of electricity is $0.10 per kWh, then the annual cost of running your Skype server is between $44 and $88. These are just ballpark numbers and you'll no doubt do your own, but it does show that the cost of running a Skype server 24/7 is not insignificant. (Cost = power consumed in kW x 365 days x 24 hours x cost per kWh, where a power consumption of 50W is 0.05kW and 100W is 0.1kW.)
Resources for this article: /article/8644.
|Happy Birthday Linux||Aug 25, 2016|
|ContainerCon Vendors Offer Flexible Solutions for Managing All Your New Micro-VMs||Aug 24, 2016|
|Updates from LinuxCon and ContainerCon, Toronto, August 2016||Aug 23, 2016|
|NVMe over Fabrics Support Coming to the Linux 4.8 Kernel||Aug 22, 2016|
|What I Wish I’d Known When I Was an Embedded Linux Newbie||Aug 18, 2016|
|Pandas||Aug 17, 2016|
- Happy Birthday Linux
- Download "Linux Management with Red Hat Satellite: Measuring Business Impact and ROI"
- ContainerCon Vendors Offer Flexible Solutions for Managing All Your New Micro-VMs
- What I Wish I’d Known When I Was an Embedded Linux Newbie
- Updates from LinuxCon and ContainerCon, Toronto, August 2016
- NVMe over Fabrics Support Coming to the Linux 4.8 Kernel
- New Version of GParted
- Returning Values from Bash Functions
- All about printf
- Tech Tip: Really Simple HTTP Server with Python
With all the industry talk about the benefits of Linux on Power and all the performance advantages offered by its open architecture, you may be considering a move in that direction. If you are thinking about analytics, big data and cloud computing, you would be right to evaluate Power. The idea of using commodity x86 hardware and replacing it every three years is an outdated cost model. It doesn’t consider the total cost of ownership, and it doesn’t consider the advantage of real processing power, high-availability and multithreading like a demon.
This ebook takes a look at some of the practical applications of the Linux on Power platform and ways you might bring all the performance power of this open architecture to bear for your organization. There are no smoke and mirrors here—just hard, cold, empirical evidence provided by independent sources. I also consider some innovative ways Linux on Power will be used in the future.Get the Guide