How a Corrupted USB Drive Was Saved by GNU/Linux
To summarize exactly what fixed the USB device:
Step 1: create a filesystem image of the right size, with FATs and the directory in the right places:
# dd if=/dev/zero of=/tmp/r2x bs=512 count=1001952 # losetup /dev/loop2 /tmp/r2x # mkfs.msdos -n mkfs__msdos -s 16 -R 64 /dev/loop2
Step 2: copy bytes from the corrupt image, except the boot sector, onto the filesystem image created in step 1:
# dd if=r1 of=r2x bs=512 skip=1 seek=1
Step 3: execute filesystem repair on that image:
# fsck.msdos -f -r /dev/loop2
Because I knew that FAT1 was bogus, I told it to use FAT2, and it reported success. It asked me whether to write the changes, and I said yes.
The filesystem images in /tmp/r2x and /dev/loop2 now were consistent. The acid test was to try to mount the filesystem:
# mkdir /tmp/r2d # mount -t vfat /dev/loop2 /tmp/r2d # ls -lRA /tmp/r2d
After which all kinds of good stuff appeared.
Note: A good result to ls -lR showed that I was lucky in one other way: I didn't know if the boot sector had a good value for the size of the root directory, the -r parameter to mkfs.msdos. I simply used the default and it turned out fine.
At this point, I decided I had better burn a CD. I burn and read CDs all the time on Linux, but I rarely burn CDs to be read by Windows. Again I did a Web search, and a page from IBM's DeveloperWorks site turned up. I had searched "linux burn CD windows" or something like that. So I tried this:
# mkisofs -J -r -v /tmp/r2d | \ cdrecord -v -pad -eject fs=4m speed=4 dev=0,0,0 -
I wasn't 100% sure that Windows would like this CD, but fortunately I have Windows95 under Win4Lin. Its sole purpose for me is to run Quicken and TurboTax, but I fired it up and pointed Windows Explorer at the just-burned CD-ROM. Explorer loved it. I used gimp(1) to capture a screenshot and e-mailed the image to my friend's brother--he was ecstatic.
Shell jockeys need not read this.
1 #!/bin/bash 2 # parameters added to mkfs.msdos.... 3 ARGS="$*" 4 if mount | grep /tmp/r2d; then umount /tmp/r2d; fi 5 losetup -d /dev/loop2 6 losetup /dev/loop2 /tmp/r2x 7 mkfs.msdos -n mkfs__msdos -s 16 $ARGS /dev/loop2 8 mount -t vfat /dev/loop2 /tmp/r2d 9 yes hello | dd bs=8192 count=3 of=/tmp/r2d/foo.txt 10 umount /tmp/r2d
Line 1 identifies to exec(2) that this is supposed to be run by the shell. I've become accustomed to bash, the Bourne again shell.
Line 2 simply explains line 3, that the parameters you type after b.sh are parameters to add to the mkfs.msdos command line.
Lines 4-6 establish /dev/loop2 as the block device whose contents are in the filesystem image kept in /dev/r2x. Line 4 unmounts the artificial filesystem if it was mounted; this is done because we're about to make some changes to it. Lines 5-6 make sure that /dev/loop2 is connected to /tmp/r2x and only to /tmp/r2x.
Line 7 creates an artificial filesystem image with whatever additional parameters the user gave--remember $ARGS from line 3?.
Line 8 mounts the filesystem onto /tmp/r2d. Line 9 creates a file of about 24KB (three clusters), so I have a filename to look for at the beginning of the directory.
Line 10 then unmounts the artificial filesystem image, so the kernel does not think there are inconsistencies if I play with /tmp/r2x.
- Download "Linux Management with Red Hat Satellite: Measuring Business Impact and ROI"
- Use Linux as a SAN Provider
- An Introduction to GCC Compiler Intrinsics in Vector Processing
- Linux Journal Goes 100% Digital
- Numerical Python
- diff -u: What's New in Kernel Development
- Are you an extremist?
- NSA: Linux Journal is an "extremist forum" and its readers get flagged for extra surveillance
- An Amateur Radio Survival Guide for Linux Users
- Tech Tip: Really Simple HTTP Server with Python