Paranoid Penguin - Securing Your WLAN with WPA and FreeRADIUS, Part II
Last month, I described the new wireless LAN security protocol, Wi-Fi Protected Access (WPA). I showed how it adds strong and flexible authentication, plus dynamic encryption-key negotiation, to the otherwise-insecure WEP protocol. I also showed how WPA's component protocols, including 802.1x, the various flavors of EAP and RADIUS, interrelate. In this month's column I start to show how to create your own authentication server for WPA and other 802.1x scenarios, using FreeRADIUS and OpenSSL.
WPA, you may recall, is more modular than WEP. Whereas authentication and encryption in WEP both are achieved through a shared secret used by all wireless clients, authentication in WPA normally is achieved by using the 802.1x protocol. The pre-shared key (PSK) mode, which works more like WEP, also is an option. With WPA, unique encryption keys for each client are generated dynamically and refreshed periodically by the access point.
802.1x is a flexible authentication protocol that depends on the Extensible Authentication Protocol (EAP). Many different flavors of EAP, including EAP-TLS and PEAP, are supported in WPA-enabled products. If you choose to skip 802.1x and deploy WPA in the much simpler PSK mode, which gives you dynamic encryption key generation but exposes authentication credentials by transmitting them in clear text, all you need to do is configure your access point and wireless clients with the same pre-shared key.
If, however, you want to use WPA to its full potential by employing the much-stronger authentication mechanisms in 802.1x, you need a RADIUS server. Commercial tools are available for this work, such as Funk Software's Steel Belted RADIUS. But if you prefer a free and open-source RADIUS application, FreeRADIUS supports all major flavors of EAP and is both stable and secure. Here's how you can put it to work.
Naturally, I don't have enough space to describe all possible uses of FreeRADIUS with 802.1x or even specifically with wireless scenarios. Therefore, let's start with a description of an example usage scenario that subsequent procedures can implement.
The most important choice to make when implementing WPA is which flavor of EAP to use. This is limited not only by what your RADIUS server software supports but also by your client platforms. Your wireless access point, interestingly, is EAP-agnostic—assuming it supports 802.1x and/or WPA in the first place. It simply passes EAP traffic from clients to servers, without requiring explicit support for any particular EAP subtype.
What your client platform supports is a function both of your client operating system and of its wireless hardware. For example, a Microsoft Windows XP system with an Intel Pro/2100 (Centrino) chipset supports EAP-TLS and PEAP, but EAP-TTLS isn't an option. But if you run Linux with wpa_supplicant (see the on-line Resources), you have a much wider range of choices available.
In our example scenario, I cover EAP-TLS. EAP-TLS requires client certificates, which in turn requires you to set up a certificate authority (CA). But there are several good reasons to use EAP-TLS. First, EAP-TLS is supported widely. Second, TLS (X.509 certificate) authentication provides strong security. Third, it really doesn't require that much work to use OpenSSL to create your own CA.
Our example scenario, therefore, involves Windows XP clients using EAP-TLS to connect to a WPA-enabled access point. The access point, in turn, is configured to authenticate off of a FreeRADIUS 1.0.1 server running Linux.
SuSE 9.2, Fedora Core 3 and Red Hat Enterprise Linux each has its own FreeRADIUS RPM package, called freeradius. Debian Sarge (Debian-testing) has a DEB package by the same name. With Red Hat, Fedora and Debian-testing, additional packages are available if you want to use a MySQL authentication database. In addition, Debian-testing has a few other features broken out into still more packages. With all four distributions, however, the only package you should need for 802.1x authentication is the base freeradius package. If your favorite Linux distribution doesn't have its own FreeRADIUS package, or if it does but not a recent enough version to meet your needs, you can download the latest FreeRADIUS source code from the Web site (see Resources).
Compiling FreeRADIUS is simple: it's the common ./configure && make && make install routine. If you're new to the compiling game, see the source distribution's INSTALL file for more detailed instructions. You should execute the configure and make commands as some nonroot user and execute only make install as root.
Notice that, by default, the configure script installs FreeRADIUS into subdirectories of /usr/local. Because the Makefile has no uninstall action, I recommend leaving this setting unchanged, as it simplifies removing FreeRADIUS later, should that become necessary.
|Graph Any Data with Cacti!||Apr 27, 2017|
|Be Kind, Buffer!||Apr 26, 2017|
|Preparing Data for Machine Learning||Apr 25, 2017|
|openHAB||Apr 24, 2017|
|Omesh Tickoo and Ravi Iyer's Making Sense of Sensors (Apress)||Apr 21, 2017|
|Low Power Wireless: 6LoWPAN, IEEE802.15.4 and the Raspberry Pi||Apr 20, 2017|
- Graph Any Data with Cacti!
- Teradici's Cloud Access Platform: "Plug & Play" Cloud for the Enterprise
- The Weather Outside Is Frightful (Or Is It?)
- Simple Server Hardening
- Understanding Firewalld in Multi-Zone Configurations
- Gordon H. Williams' Making Things Smart (Maker Media, Inc.)
- Server Technology's HDOT Alt-Phase Switched POPS PDU
- IGEL Universal Desktop Converter
- From vs. to + for Microsoft and Linux