Linux MIDI: a Brief History, Part 1
In 1981, an audio engineer named Dave Smith designed a universal interface for connecting synthesizers together. He presented his basic design at the Audio Engineering Society meeting that year, and in 1982, the Roland corporation expanded the design specification. Later that year Smith's company, Sequential Circuits, produced the Prophet-600, the first MIDI-capable synthesizer.
The first public presentation of a working MIDI connection took place in 1983 at the winter NAMM (National Association of Music Merchandisers) show. A Sequential Circuits Prophet-600 was connected to a Roland Jupiter 6 by each synth's MIDI interface. Connecting synthesizers together certainly was not a new idea, but this means of doing so was new and far more effective than earlier solutions. In the summer of the same year, Yamaha introduced the DX7 FM synthesizer, with MIDI hardware as a standard component. MIDI rapidly found favor with manufacturers that recognized the advantages of standardizing a basic hardware/software interface for data exchange among different machines. It is no exaggeration to say that MIDI fueled an incredibly active period of hardware synthesis development during the late 1980s and early 1990s.
MIDI also was adopted quickly for use with the newly popular personal computer. Manufacturers marketed standalone MIDI interface cards that allowed MIDI data exchange between a host computer and any external MIDI equipment. Software houses created and marketed music composition programs and other MIDI software. Equipped with the right hardware and software, a musician could use the computer to control synthesizers, drum machines, mixers, effects units--anything equipped with MIDI connectors. The extent of control varied, but the efficiency of the MIDI studio made a revolutionary impact on music production.
The MIDI studio of the late 1980s typically included a computer, a keyboard synthesizer, a drum machine, some external rackmount synths, perhaps a MIDI-controllable effects box and a MIDI router box to connect these pieces. At that time, the dominant audio recording medium was tape. By the mid-1990s, though, the MIDI studio was becoming more computer-centric, with soundcards providing better on-board synthesizers and software MIDI sequencers evolving to include audio tracks. By then, audio recording had shifted to the hard-disk. A contemporary MIDI studio still might include a keyboard synth or two, but the computer itself now was able to host software synthesizers and effects processors. At the same time, the computer internally controlled all MIDI connections and routing while running a sequencer capable of recording synchronized MIDI and audio data.
The MIDI specification has responded well to the needs of its community of users. The spec now includes provisions for encoding SMPTE time code, message types for remote operation of machine transport controls, a generalized instrument patch map for synthesizers, a standardized sequence data file format and support for multiport hardware, with a per-port maximum of 16 channels.
For many people, a MIDI refers to a file saved in the MIDI sequence data file format, typically with the .MID extension. If the sequence is orchestrated following the general MIDI (GM) synthesizer patch map, you can play it on any GM-compliant synth and hear the same arrangement of instruments. The quality of instrumental sound varies, of course, from synth to synth. This combination of standard file format and generalized patch map itself has fueled a rather different revolution, the results of which can be evaluated by a quick search for "MIDI files" on Google. As I write this--September 7, 2004--the hits number more than two million. A facile proof, but clearly a lot of people enjoy making and using MIDI files.
MIDI is an acronym for musical instrument digital interface. It is a design specification for a hardware and software interface for the transmission and reception of MIDI data messages. These messages vary in kind and relative significance. For example, when you play a MIDI keyboard, the key press and release actions send on/off messages that trigger the sound capabilities of the receiving synthesizer--which may or may not be the one you're playing. Patch select buttons send MIDI program change messages, pitch bend and mod wheels send continuous streams of data, pedals send their own kind of messages and so on.
The MIDI data stream carries various messages to a target device and activates the device's various capabilities. The original intent was to connect synthesizers, but the MIDI specification now encompasses the control of a wide variety of devices, including non-musical equipment such as lighting systems, pyrotechnic displays and stage hydraulics.
MIDI data essentially is control data, and it is important to note it is not digital audio data. MIDI files are quite small when compared to a WAV or MP3 version of the same file, which gives them much appeal when storage and speed of access are critical considerations.
For the technically minded, here are a few technical statistics: MIDI works at an asynchronous transmission rate of 31.25 kilobits per second, and a single MIDI data byte equals ten bits. A note-on message is three bytes long, so a single key press on your synthesizer keyboard takes about 1 ms to get to the synthesizer itself. Although MIDI is a relatively slow serial communications protocol, it still is good enough to capture and play accurately a human performance.
Despite its popularity, MIDI is not a total solution for computer-based music making. It does not directly deal with audio data, its original keyboard orientation does not lend MIDI to easy implementation for plucked string instruments or wind instruments, and its integer valuation may not provide the fine control sought by the musician or composer. Nevertheless, if your needs do not involve such considerations, then MIDI might be a perfect fit for your music-making endeavors.
Similis sum folio de quo ludunt venti.
Fast/Flexible Linux OS Recovery
On Demand Now
In this live one-hour webinar, learn how to enhance your existing backup strategies for complete disaster recovery preparedness using Storix System Backup Administrator (SBAdmin), a highly flexible full-system recovery solution for UNIX and Linux systems.
Join Linux Journal's Shawn Powers and David Huffman, President/CEO, Storix, Inc.
Free to Linux Journal readers.Register Now!
- Server Hardening
- BitTorrent Inc.'s Sync
- The Death of RoboVM
- The Humble Hacker?
- Open-Source Project Secretly Funded by CIA
- EnterpriseDB's EDB Postgres Advanced Server and EDB Postgres Enterprise Manager
- New Container Image Standard Promises More Portable Apps
- The US Government and Open-Source Software
- Download "Linux Management with Red Hat Satellite: Measuring Business Impact and ROI"
- ACI Worldwide's UP Retail Payments
In modern computer systems, privacy and security are mandatory. However, connections from the outside over public networks automatically imply risks. One easily available solution to avoid eavesdroppers’ attempts is SSH. But, its wide adoption during the past 21 years has made it a target for attackers, so hardening your system properly is a must.
Additionally, in highly regulated markets, you must comply with specific operational requirements, proving that you conform to standards and even that you have included new mandatory authentication methods, such as two-factor authentication. In this ebook, I discuss SSH and how to configure and manage it to guarantee that your network is safe, your data is secure and that you comply with relevant regulations.Get the Guide