Linux on Linksys Wi-Fi Routers
Wireless networking has become a mass-market technology, and the price of 802.11 or Wi-Fi gear has fallen to commodity levels. Several thousand competitors with virtually identical products now are vying for your Wi-Fi dollars. In this kind of competitive space it is natural for manufacturers to seek the lowest cost alternatives. Their choice? Linux, of course.
Linux has become the premium OS for inexpensive, feature-packed wireless networking. Linksys, one of the major wireless players, turned to Linux for its 802.11g next-generation Wi-Fi devices. When Cisco bought Linksys in early 2003, it inherited both the Linux devices and an emerging feud over the unreleased GPL source code. After several months of lobbying by open-source enthusiasts, Cisco relented and released the source.
The Linksys WRT54G product (Figure 1) is especially interesting due to its low price and internal hardware. The WRT54G contains a four-port Ethernet hub, an Ethernet WAN port, support for the new high-speed 54MB/s 802.11g wireless protocol and backward compatibility with older 802.11b devices.
But what the WRT54G lacks is what makes it interesting. Under the hood the unit sports a 125MHz MIPS processor with 16MB of RAM. This is more than enough horsepower to run some serious applications, so why not add some?
The latest source on the Linksys site is about 145MB in size and contains a complete toolchain for MIPS cross development (see “The Linksys WRT54G Source Tree” sidebar).
Follow the instructions for creating symlink and PATH additions in the README file in the WRT54G/src subdirectory. Then cd to the router subdirectory and run make menuconfig. Keep the standard options for your first build, and click through to create your configuration files. cd up one level to the WRT54G/src directory and type make. That's all there is to it. A file called code.bin is created in the WRT54G/image directory containing a compressed cramfs filesystem and a Linux 2.4.20 kernel.
Now comes the scary part—how do you get this new firmware on to your Linksys? There are two methods, by tftp or through the Web-based firmware upgrade interface. I suggest you use the Web upgrade for your first try.
Surf to your Linksys box—the default address is 192.168.1.1—and log in. Select Firmware Upgrade from the Administration menu and upload your code.bin file. The router now restarts. Congratulations, you have just modded your Linksys box.
The existence of Linux on the WRT54G was discovered through a bug in the ping utility in the Diagnostics menu. Firmware versions prior to 1.42.2 allowed arbitrary code to be run from the ping window if surrounded by back-ticks. If you have a box with the older firmware, try typing `ls -l /` in the ping window's IP address field. Voilà—a listing of the root directory magically appears.
The ping hack allows curious folks to explore their boxes without modifying the source. But exploring by way of the ping window is slow and tedious. What we really need is a shell on the box.
By expanding the ping hack in the source code, a custom firmware image can be created with the full power of a Linux shell over the Web interface. See the on-line Resources section URLs on how to create the command shell.
But why stop there? The default firmware's cramfs filesystem leaves 200K of Flash memory free. There is room for many useful applications, such as telnet or Secure Shell or perhaps even a VPN client or server.
One useful command supplied by Linksys in binary form only is wl. The wl command contains several dozen internal commands that control wireless settings, including the popular power adjustment setting. Typing wl with no parameters produces a complete list of its capabilities.
The default power setting on the WRT54G is 28 milliwatts, and this setting cannot be changed externally. But by using the ping hack or a shell, you can change this with wl, using the txpwr subcommand and a number between 1 and 84 milliwatts. This number raises or lowers the default power setting until the next reboot.
Increasing the power setting or replacing the stock antennas may increase your radio output and violate local laws. If you replace the stock antennas and lower the power setting, your unit's range can be extended significantly while remaining within legal radio power limits.
The WRT54G supports two external antennas and automatically balances between them depending on which received the last active packet. When adding a more powerful external antenna, this is not the setup that you want. You need to force the unit to choose the high power antenna every time. This is done with wl txant for receiving and wl antdiv for sending. A 0 parameter forces the left antenna coupling and a 1 forces the right, as you face the front panel.
Webinar: 8 Signs You’re Beyond Cron
On Demand NOW
Join Linux Journal and Pat Cameron, Director of Automation Technology at HelpSystems, as they discuss the eight primary advantages of moving beyond cron job scheduling. In this webinar, you’ll learn about integrating cron with an enterprise scheduler.View Now!
|Dr Hjkl on the Command Line||May 21, 2015|
|Initializing and Managing Services in Linux: Past, Present and Future||May 20, 2015|
|Goodbye, Pi. Hello, C.H.I.P.||May 18, 2015|
|Using Hiera with Puppet||May 14, 2015|
|Urgent Kernel Patch for Ubuntu||May 12, 2015|
|Gartner Dubs DivvyCloud Cool Cloud Management Vendor||May 12, 2015|
- Initializing and Managing Services in Linux: Past, Present and Future
- Dr Hjkl on the Command Line
- Goodbye, Pi. Hello, C.H.I.P.
- Using Hiera with Puppet
- Gartner Dubs DivvyCloud Cool Cloud Management Vendor
- Infinite BusyBox with systemd
- Urgent Kernel Patch for Ubuntu
- Mumblehard--Let's End Its Five-Year Reign
- It's Easier to Ask Forgiveness...
- A More Stable Future for Ubuntu