Linux Serial Consoles for Servers and Clusters
At this point, we have described a Linux system that can boot up without a directly attached keyboard and monitor. It uses the first serial port for all informational messages as the system boots and accepts logins from that console once the system is up. But to what should you connect that console port? There is a world of possibilities. If you have no particular need for remote-console access, you simply can leave the port unconnected until you need to maintain the system. You can use a computer or laptop connected over a null modem with the minicom program to access your system's console. Simply configure minicom to speak to an unused serial port, set the speed to 9,600 baud, 8 bits, no parity and 1-stop bit (aka 9600-8n1). Cable the systems together, then watch the system boot and eventually ask you to log in.
For remote access to a server's console, you can set up a console concentrator, which is a lot like a terminal server. It can be a homegrown Linux box with multiport serial cards, giving you as many ports as you have servers. With this kind of setup, you can access all your servers' consoles by logging in to a single dedicated Linux box.
If you like the idea of remote access to your consoles but want more of an appliance, a number of products can help. Cyclades (www.cyclades.com) makes a console concentrator called AlterPath; it is reasonably priced and comes in 1, 4, 8, 16, 32 and 48-port models. The AlterPath units run Linux internally from Flash memory. A Web interface is used for configuration, or you can modify the configuration files directly through a shell login.
The most flexible way to configure the Cyclades unit is to present the consoles using Cyclades' modified SSH dæmon. This way you can SSH directly to each connected server's console port, which is identified by a textual name you choose. So, to connect to a server identified as server hooked to a Cyclades unit with a hostname of cyclades as the user matt, the command would look like: ssh matt:server@cyclades. (The colon syntax is a Cyclades modification to sshd, allowing you to pass a port name.) This setup is easy to use, and you even can set up SSH private key authentication.
Other vendors make console concentrators or servers, including Digi (www.digi.com), Equinox (www.equinox.com) and Raritan (www.raritan.com). All of these vendors offer network-attached serial console products.
As mentioned earlier, serial consoles on standard PC hardware lack some of the features available on enterprise UNIX hardware. One solution is PC Weasel (www.realweasel.com), which comes in the form of a PCI or ISA card. This device emulates a video card and translates all output to the serial port as normal terminal escape sequences. Input from the serial port is translated into PC keyboard scan codes. Because it looks like a video card to the system, the system allows it full access to BIOS and POST. Additional features allow you to do a remote hard reset. The PC Weasel also has its own processor, so it is available even if the host into which it is plugged crashes.
If you would like to build your own console concentrator, some options are available to make it a little better than a simple box with a lot of serial ports. Conserver (www.conserver.com) is an open-source software package for managing systems connected to serial consoles. It supports SSL encryption and is highly configurable.
Resources for this article: /article/7507.
Matthew E. Hoskins is a Linux/UNIX system administrator for The New Jersey Institute of Technology, where he maintains many of the corporate administrative systems. He enjoys trying to get wildly different systems and software working together, usually with a thin layer of Perl (also known as MattGlue). He can be reached at email@example.com.
|Daily Giveaway - Fun Prizes from Red Hat!||Oct 25, 2016|
|Installing and Running a Headless Virtualization Server||Oct 25, 2016|
|Ubuntu MATE, Not Just a Whim||Oct 21, 2016|
|Non-Linux FOSS: Screenshotting for Fun and Profit!||Oct 20, 2016|
|Nasdaq Selects Drupal 8||Oct 19, 2016|
|Canonical Ltd.'s Ubuntu Core||Oct 19, 2016|
- Installing and Running a Headless Virtualization Server
- Daily Giveaway - Fun Prizes from Red Hat!
- Daily Giveaway
- Ubuntu MATE, Not Just a Whim
- Nasdaq Selects Drupal 8
- Build Your Own Raspberry Pi Camera
- Secure Desktops with Qubes: Compartmentalization
- Canonical Ltd.'s Ubuntu Core
- Non-Linux FOSS: Screenshotting for Fun and Profit!
- Polishing the wegrep Wrapper Script