Best of Technical Support
I am using the Red Hat Kickstart installation feature for the 7.2 distribution to install a customized version of Linux on several machines. Currently, I use a floppy drive to boot and store the ks.cfg file on the floppy, so the syslinux.cfg file has a line that looks like this:
label ks kernel vmlinuz append text ks=floppy initrd.img lang= devfs=nomount ramdisk_size=7168
How do I start the Kickstart installation using a USB floppy/USB CD-ROM? I can boot using USB floppy/CD-ROM, but the Kickstart installation fails, as it doesn't find the ks.cfg file residing on the USB device.
—Vishali Karnik, Vishali.Karnik@respironics.com
According to their release notes, Red Hat did begin recognizing USB floppy drives during install with the 7.2 release, so this should be possible. I don't have a USB floppy drive to test this, but the helpful people at Fujitsu Siemens Computers have some advice on how to do Kickstart from USB floppies: www.fujitsu-siemens.com/partner/linux/readme/driver-disks-redhat.shtm. USB floppy drives are detected as SCSI devices. If you have no real SCSI devices on the system, you need to change ks=floppy to ks=hd:sda/ks.cfg. If that doesn't work, drop to a shell during a manual install and cat /proc/scsi/scsi to see what device name in /dev is being assigned to the USB floppy. The first device in /proc/scsi/scsi will be sda, the second will be sdb and so on.
—Don Marti, firstname.lastname@example.org
The PCtel 2304 WT modem with my Dell notebook is not detected by Red Hat 8.0.
—Hari Babu Prasad, email@example.com
In order to use PCtel-based modems under Linux, you must use a driver module. An unofficial home page, linmodems.technion.ac.il/pctel-linux, provides the latest version, a list of supported modems and a pretty good HOWTO.
—Mario Bittencourt, firstname.lastname@example.org
I just installed an internet server (Red Hat 7.3), and when I try to access the POP3 mail from another computer, it says the connection is refused. I already checked sendmail, and it's running.
—Fausto Garcia, email@example.com
There are two halves to a complete mail server configuration, and sendmail provides only one-half: the mail transfer agent (MTA) using the simple mail transfer protocol (SMTP). This is a push mechanism used for delivery of a message to a target system. It does not provide services for clients to pull messages from their mailboxes.
—Chad Robinson, firstname.lastname@example.org
POP3 is not provided by sendmail in Red Hat; it is provided by a package named IMAP, more specifically, imap-2001a-10. To configure POP3, follow these steps: 1) load the package from rpmfind.net/linux/redhat/7.3/en/os/i386/RedHat/RPMS/imap-2001a-10.i386.rpm; 2) install it with rpm -Uvh imap-2001a-10.i386.rpm; 3) enable the POP3 service by editing the file /etc/xinetd.d/ipop3 and changing the line that says disable = yes to disable = no; 4) start the service with service ipop3 start; 5) make sure POP3 starts every time you boot your server: chkconfig --level 345 ipop3 on; and 6) test your POP3 service. Of course, you need to have a user account in your server.
—Felipe Barousse Boué, email@example.com
I recently upgraded my Compaq Presario 7000 from Red Hat 7.1 to Red Hat 8.0. My USB keyboard worked fine during the whole setup process. Once the unit boots into runlevel 3 or above, however, the USB keyboard no longer works. To get around this, I have edited my modules.conf file so no USB support is ever started, which is not a great solution.
—Doug Poulin, firstname.lastname@example.org
Make sure your kernel includes “USB Human Interface Device (full HID) support” and “HID input layer support”. Try modprobe hid to see if this actually is a module. If so, you might try adding these lines to your /etc/modules.conf:
alias usb uhci post-install uhci modprobe hid
—Robert Connoy, email@example.com
Fast/Flexible Linux OS Recovery
On Demand Now
In this live one-hour webinar, learn how to enhance your existing backup strategies for complete disaster recovery preparedness using Storix System Backup Administrator (SBAdmin), a highly flexible full-system recovery solution for UNIX and Linux systems.
Join Linux Journal's Shawn Powers and David Huffman, President/CEO, Storix, Inc.
Free to Linux Journal readers.Register Now!
- The Qt Company's Qt Start-Up
- Devuan Beta Release
- May 2016 Issue of Linux Journal
- EnterpriseDB's EDB Postgres Advanced Server and EDB Postgres Enterprise Manager
- The US Government and Open-Source Software
- Open-Source Project Secretly Funded by CIA
- The Death of RoboVM
- The Humble Hacker?
- BitTorrent Inc.'s Sync
- New Container Image Standard Promises More Portable Apps
In modern computer systems, privacy and security are mandatory. However, connections from the outside over public networks automatically imply risks. One easily available solution to avoid eavesdroppers’ attempts is SSH. But, its wide adoption during the past 21 years has made it a target for attackers, so hardening your system properly is a must.
Additionally, in highly regulated markets, you must comply with specific operational requirements, proving that you conform to standards and even that you have included new mandatory authentication methods, such as two-factor authentication. In this ebook, I discuss SSH and how to configure and manage it to guarantee that your network is safe, your data is secure and that you comply with relevant regulations.Get the Guide