# Distributed Hash Tables, Part I

In the world of decentralization, distributed hash tables (DHTs) recently have had a revolutionary effect. The chaotic, ad hoc topologies of the first-generation peer-to-peer architectures have been superseded by a set of topologies with emergent order, provable properties and excellent performance. Knowledge of DHT algorithms is going to be a key ingredient in future developments of distributed applications.

A number of research DHTs have been developed by universities, picked up by the Open Source community and implemented. A few proprietary implementations exist as well, but currently none are available as SDKs; rather, they are embedded in commercially available products. Each DHT scheme generally is pitched as being an entity unto itself, different from all other schemes. In actuality, the various available schemes all fit into a multidimensional matrix. Take one, make a few tweaks and you end up with one of the other ones. Existing research DHTs, such as Chord, Kademlia and Pastry, therefore are starting points for the development of your own custom schemes. Each has properties that can be combined in a multitude of ways. In order to fully express the spectrum of options, let's start with a basic design and then add complexity in order to gain useful properties.

Basically, a DHT performs the functions of a hash table. You can store a key and value pair, and you can look up a value if you have the key. Values are not necessarily persisted on disk, although you certainly could base a DHT on top of a persistent hash table, such as Berkeley DB; and in fact, this has been done. The interesting thing about DHTs is that storage and lookups are distributed among multiple machines. Unlike existing master/slave database replication architectures, all nodes are peers that can join and leave the network freely. Despite the apparent chaos of periodic random changes to the membership of the network, DHTs make provable guarantees about performance.

To begin our exploration of DHT designs, we start with a circular, double-linked list. Each node in the list is a machine on the network. Each node keeps a reference to the next and previous nodes in the list, the addresses of other machines. We must define an ordering so we can determine what the “next” node is for each node in the list. The method used by the Chord DHT to determine the next node is as follows: assign a unique random ID of k bits to each node. Arrange the nodes in a ring so the IDs are in increasing order clockwise around the ring. For each node, the next node is the one that is the smallest distance clockwise away. For most nodes, this is the node whose ID is closest to but still greater than the current node's ID. The one exception is the node with the greatest ID, whose successor is the node with the smallest ID. This distance metric is defined more concretely in the distance method (Listing 1).

**
Listing 1. ringDistance.py**

# This is a clockwise ring distance function. # It depends on a globally defined k, the key size. # The largest possible node id is 2**k. def distance(a, b): if a==b: return 0 elif a<b: return b-a; else: return (2**k)+(b-a);

Each node is itself a standard hash table. All you need to do to store or retrieve a value from the hash table is find the appropriate node in the network, then do a normal hash table store or lookup there. A simple way to determine which node is appropriate for a particular key (the one Chord uses) is the same as the method for determining the successor of a particular node ID. First, take the key and hash it to generate a key of exactly k bits. Treat this number as a node ID, and determine which node is its successor by starting at any point in the ring and working clockwise until a node is found whose ID is closest to but still greater than the key. The node you find is the node responsible for storage and lookup for that particular key (Listing 2). Using a hash to generate the key is beneficial because hashes generally are distributed evenly, and different keys are distributed evenly across all of the nodes in the network.

**
Listing 2. findNode.py**

# From the start node, find the node responsible # for the target key def findNode(start, key): current=start while distance(current.id, key) > \ distance(current.next.id, key): current=current.next return current # Find the responsible node and get the value for # the key def lookup(start, key): node=findNode(start, key) return node.data[key] # Find the responsible node and store the value # with the key def store(start, key, value): node=findNode(start, key) node.data[key]=value

This DHT design is simple but entirely sufficient to serve the purpose of a distributed hash table. Given a static network of nodes with perfect uptime, you can start with any node and key and find the node responsible for that key. An important thing to keep in mind is that although the example code so far looks like a fairly normal, doubly linked list, this is only a simulation of a DHT. In a real DHT, each node would be on a different machine, and all calls to them would need to be communicated over some kind of socket protocol.

In order to make the current design more useful, it would be nice to account for nodes joining and leaving the network, either intentionally or in the case of failure. To enable this feature, we must establish a join/leave protocol for our network. The first step in the Chord join protocol is to look up the successor of the new node's ID using the normal lookup protocol. The new node should be inserted between the found successor node and that node's predecessor. The new node is responsible for some portion of the keys for which the predecessor node was responsible. In order to ensure that all lookups work without fail, the appropriate portion of keys should be copied to the new node before the predecessor node changes its next node pointer to point to the new node.

Leaves are very simple; the leaving node copies all of its stored information to its predecessor. The predecessor then changes its next node pointer to point to the leaving node's successor. The join and leave code is similar to the code for inserting and removing elements from a normal linked list, with the added requirement of migrating data between the joining/leaving nodes and their neighbors. In a normal linked list, you remove a node to delete the data it's holding. In a DHT, the insertion and removal of nodes is independent of the insertion and removal of data. It might be useful to think of DHT nodes as similar to the periodically readjusting buckets used in persistent hash table implementations, such as Berkeley DB.

Allowing the network to have dynamic members while ensuring that storage and lookups still function properly certainly is an improvement to our design. However, the performance is terrible—O(n) with an expected performance of n/2. Each node traversed requires communication with a different machine on the network, which might require the establishment of a TCP/IP connection, depending on the chosen transport. Therefore, n/2 traversed nodes can be quite slow.

In order to achieve better performance, the Chord design adds a layer to access O(log n) performance. Instead of storing a pointer to the next node, each node stores a “finger table” containing the addresses of k nodes. The distance between the current node's ID and the IDs of the nodes in the finger table increases exponentially. Each traversed node on the path to a particular key is closer logarithmically than the last, with O(log n) nodes being traversed overall.

In order for logarithmic lookups to work, the finger table needs to be
kept up to date. An out-of-date finger table doesn't break lookups as long
as each node has an up-to-date next pointer, but lookups are
logarithmic only if the finger table is correct. Updating the finger table
requires that a node address is found for each of the k slots in the
table. For any slot x, where x
is 1 to k, finger[x] is determined by
taking the current node's ID and looking up the node responsible for the
key (id+2^{(x-1)}) mod
(2^{k}) (Listing 3). When doing lookups, you now have
k nodes to choose from at each hop, instead of only one at each. For each
node you visit from the starting node, you follow the entry in the finger
table that has the shortest distance to the key (Listing 4).

## Trending Topics

## Enterprise Linux

SUSE Linux Enterprise High Availability Extension | Mar 29, 2017 |

Hybrid Cloud Storage Delivers Performance and Value | Mar 29, 2017 |

smbclient Security for Windows Printing and File Transfer | Mar 28, 2017 |

How to Calculate Flash Storage TCO | Mar 27, 2017 |

Non-Linux FOSS: Don't Drink the Apple Kool-Aid; Brew Your Own! | Mar 27, 2017 |

Three EU Industries That Need HPC Now | Mar 25, 2017 |

- smbclient Security for Windows Printing and File Transfer
- SUSE Linux Enterprise High Availability Extension
- Non-Linux FOSS: Don't Drink the Apple Kool-Aid; Brew Your Own!
- Hybrid Cloud Storage Delivers Performance and Value
- Returning Values from Bash Functions
- How to Calculate Flash Storage TCO
- Preseeding Full Disk Encryption
- Two Ways GDPR Will Change Your Data Storage Solution
- Chemistry on the Desktop
- Hodge Podge

## Comments

## Wrong Algorithm

the last else in distance should return (2**k)-(b-a), otherwise id would exceed the longest possible distance, i.e. the ring size.

Btw, nice article ;)

## Re: Wrong Algorithm

After the last else in the distance function, b < a, so (b-a) is negative. The sum of (2**k) and (b-a) will still be less than (2**k).

## Wrong Algorithm

The findNode should return

`current.next`