Writing Secure Programs
The main focus of most writing about security is network security and physical security. Not much is written about writing secure programs. A lot of what you need to write secure programs is common sense, but due to time constraints and design shortcuts, it is rarely used. Any good programmer knows the concepts but usually does not have the time to implement them; there is a lot of pressure to produce a lot of code and get the project done.
In the early 1970s, the concept of structured programming was alive. Not only was the program structured but the whole project had structure; there were technical specifications, design specifications, detail design specifications, design walk-throughs and code walk-throughs. This made projects bigger and longer, but when finished, the code was debugged easily and often worked with few changes. Some of these projects took many years to produce. However, there was little external influence from networks, the Web and time to market.
Today, a lot of the structured development process has literally disappeared. But security starts with the design of the program or application and depends on coding standards established by the organization where the work is being done.
It is very unlikely that any code will be 100% secure; no code ever is. But, what can be done to make sure code is solid and secure? This article offers some ideas on what to consider and explains three tools to help write secure code. When designing and implementing an embedded system, more care is required for the coding. With the assistance of the tools in the Resources section, a lot of coding errors can be checked. The ultimate judge of secure code is left up to the implementer of the code and the ability of the implementer to understand what is secure.
Every function returns some type of status, returned either directly or as part of errno. Checking these should be simple. In C++, the exception-handling capability is easy to use but can be complicated to set up. Exception handling has improved greatly over the past few years, once the C++ standard was finalized. When practical, it should be used. Previous practice had been to ignore errors, because it was thought the data being passed was valid. This has been proven to be a bad assumption.
Data buffer overflows have led to many security fixes in the past years. When writing for an embedded system, checking for error returns is important. Decisions need to be made about whether the error is benign and can be ignored. If the error is not benign, maybe it can be corrected. If it cannot be corrected, does the system perform a soft reset or a hard reset? In some cases a soft reset, causing the action in error to be restarted, is all that is required. This is the basis for some fault-tolerant systems. Depending on the type of device, a hard reset may not be a bad thing. Other times, some form of recovery is a must.
Instead of using sprintf, strcpy and strcat, use functions like strncpy and strncat. These functions make sure the buffer does not overflow and discard any excess. Do not use fgets when reading data, as this allows overflows. These may seem like simple changes, but they are easy to forget, as is string handling, one of the most exploited areas of programs. Automated test programs check for these problems quite nicely, but the tests can be misleading. Some uses of the string function may be flagged as a problem but prove to be fine in the context where used. This is where the ability and knowledge of the implementer plays an important role. The logs generated by the tools need to be scanned to determine what code has been flagged and needs to be changed.
Memory leaks in and of themselves do not necessarily create security risks. However, they can be exploited if the memory is shared by several procedures and structures.
Buffer overflows are by far the most common security issue. If a buffer is allocated on the stack, it can be overflowed to wipe out or change the return address of a function. When a function returns then, it returns to the new address instead of to the proper address. Some buffer attacks also can occur on the heap. These are more difficult to create, but they still can be done. Programs written in C are most vulnerable to these attacks, but any language that provides low-level memory access and pointer arithmetic can be problematic. Pointer arithmetic is one area that should have bounds checking.
The GNU C compiler has an extension available, which needs to be included when the compiler is built, that implements bounds checking. It is used as an option that adds code to the program. During testing, the code can be turned on and used. During deployment the code would not be present. The reason the code should be turned off is it prints messages when the bounds are breached. If the system in place is a workstation, the messages can be left on, but an embedded system typically has no console.
An idea that might occur here is all the buffers should be statically allocated; then the problem goes away. In truth, the notion that a buffer is of fixed length can be exploited. The data being moved to the buffer still can be longer than the buffer. When it is moved it overflows, and the same problem happens. To lower the risk, the data movement should move up only to the maximum allowed for the buffer. Dynamic reallocation of strings permits programs to handle inputs of arbitrary sizes. The problem with this is the program could run out of memory. On an embedded system, such a mistake is fatal. On a workstation, the virtual memory system may start to thrash and create a performance bottleneck. In C++, the std::string class has the dynamic growth approach. If the class' data is turned into a char * pointer, a buffer overflow can happen. Other string libraries may not have these problems, but the implementer needs to be aware of the limitations.
- The Ubuntu Conspiracy
- A First Look at IBM's New Linux Servers
- Vigilante Malware
- Disney's Linux Light Bulbs (Not a "Luxo Jr." Reboot)
- Vagrant Simplified
- Libreboot on an X60, Part I: the Setup
- System Status as SMS Text Messages
- Dealing with Boundary Issues
- Bluetooth Hacks
- Non-Linux FOSS: Code Your Way To Victory!