Kernel Mode Linux

Now you don't have to write a module to run a program in kernel space. Run any program there with this patch.
What Kernel-Mode User Processes Cannot Do

Although kernel-mode user processes are ordinary user processes, they have a few limitations. If a kernel-mode user process violates these limitations, the system will be in an undefined state. In the worst-case scenario, your system may be broken.

Limitation 1: don't modify the CS, DS, SS or FS segment register. Current KML for IA-32 assumes that these segment registers are not modified by kernel-mode user processes, and it uses them internally.

Limitation 2: don't perform privileged actions improperly. In kernel mode, programs can perform any privileged action. However, if your program performs such actions in a way that is inconsistent with the kernel, the system will be in an undefined state. For example, if you execute the following program as a kernel-mode user process:

int main(int argc, char* argv[])
        /* disable hardware interrupts */
        __asm__ __volatile__ ("cli");
        for (;;);
        return 0;

your system will hang.

In my experience, few applications violate these limitations. Ones that do violate them include WINE and VMware. These limitations are against only kernel-mode user processes. Ordinary user processes are never affected by these limitations, even when running on a KML-capable kernel.

KML Internals

In IA-32 CPUs, the privilege level of an executed program is determined by the privilege level of the code segment in which the program is executed. Recall that a program counter for IA-32 CPUs consists of a segment, specified by the CS segment register, and an offset into the segment, the EIP register. The privilege level of the code segment then is determined by its segment descriptor. A segment descriptor has a field for specifying the privilege level of the segment.

Basically, the Linux kernel prepares two segments, the kernel code segment and the user code segment. The kernel code segment is used for the kernel itself, and its privilege level is kernel mode. The user code segment is used for ordinary user processes, and its privilege level is user mode. When using execve on a user process, the original Linux kernel sets its CS segment register to the user code segment. Thus, the user process is executed in user mode.

To execute a user process as a kernel-mode user process, the only thing KML does is set the CS register of the process to the kernel code segment, instead of to the user code segment. Then the process is executed in kernel mode. Because of KML's simple approach, a kernel-mode user process can be an ordinary user process.

The Stack Starvation Problem and Its Solution

As described in the previous section, the basic approach of KML is quite simple. Its big problem is called stack starvation. First, I'll explain how the original Linux kernel handles exceptions (page faults) and interrupts (timer interrupts) on IA-32 CPUs. Then, I'll describe the stack starvation problem. Finally, I'll present my solution to the problem.

In the original Linux kernel, interrupts are handled by interrupt handling routines specified as gates in the Interrupt Descriptor Table (IDT). When an interrupt occurs, an IA-32 CPU stops execution of the running program, saves the execution context of the program and executes the interrupt handling routine.

How the IA-32 CPU saves the execution context of a running program at interrupts depends on the privilege level of the program. If the program is executed in user mode, the IA-32 CPU automatically switches its memory stack to a kernel stack. Then, it saves the execution context (EIP, CS, EFLAGS, ESP and SS register) to the kernel stack. On the other hand, if the program is executed in kernel mode, the IA-32 CPU doesn't switch its memory stack and saves the context (EIP, CS and EFLAGS register) to the memory stack of the running program.

What happens if a kernel-mode user process of KML accesses its memory stack, which is not mapped by the page tables of a CPU? First, a page fault occurs, and the CPU tries to interrupt the process and jump to a page fault handler specified in the IDT. However, the CPU can't accomplish this work, because there is no stack for saving the execution context. Because the process is executed in kernel mode, the CPU can never switch the memory stack to the kernel stack. To signal this fatal situation, the CPU tries to generate a special exception, a double fault. Again, the CPU can't generate the double fault, because there is no stack for saving the execution context of the running process. Finally, the CPU gives up and resets itself.

To solve this stack starvation problem, KML exploits the task management facility of IA-32 CPUs. The IA-32 task management facility is provided to support process management for kernels. Using the facility, a kernel can switch between processes with only one instruction. However, today's kernels don't use this facility, because it is slower than software-only approaches. Thus, the facility is almost forgotten by all.

The strength of this task management facility in IA-32 CPUs is that it can be used to handle interrupts and exceptions. Tasks managed by an IA-32 CPU can be set to the IDT. If an interrupt occurs and a task is assigned to handle the interrupt, the CPU first saves the execution context of the interrupted program to a task data structure of the program instead of to the memory stacks. Then, the CPU restores the context from the task data structure specified in the IDT.

The most important point is there is no need to switch a memory stack if the task management facility is used to handle interrupts. That is, if we handle page fault exceptions with the facility, a kernel-mode user process can access its memory stack safely.

However, if we handle all page faults with the facility, the performance of the whole system degrades, because the task-based interrupt handling is slower than the ordinary interrupt handling.

Therefore, we handle only double fault exceptions this way. So, only page faults caused by memory stack absence are handled by the task management facility. In my experience, memory stacks rarely cause page faults, and the performance decrement is negligible.



Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

Looks like there is now

Anonymous's picture

Looks like there is now Kernel Mode Linux port to ARM, MIPS & PowerPC -