An Introduction to FreeS/WAN, Part I
Over the past five years or so, IPSec has emerged as the leading standard for building encrypted virtual private network (VPN) connections. FreeS/WAN (www.freeswan.org), the free secure wide area network, is the most popular and one of the most mature free implementations of IPSec, and it runs exclusively on Linux systems. This month and next we're going to discuss why and how to use FreeS/WAN for secure network communications, starting with secure wireless networking.
Until recently the two most common uses for VPNs were network-to-network (site-to-site) connections and remote-access solutions. In site-to-site connections (Figure 1), each network/site has a VPN gateway, a VPN server that communicates to other VPN gateways via IPSec (or other VPN protocol) tunnels. It also acts as a router for hosts on its local network that need to send packets to other connected VPN sites. In other words, in a site-to-site VPN, multiple users or hosts share a single tunnel to communicate to multiple hosts on a remote network.
Remote-access VPNs, including the kind used over wireless LANs, are slightly different. Rather than connecting an entire network to some other network, a remote-access VPN tunnel connects a single user or computer to a remote network (Figure 2). Typically, the user's local VPN gateway is simply a software application running on her local system (the remote VPN gateway is usually a firewall or dedicated VPN device on the home network).
Wireless local area network (LAN) VPNs are an important subcategory of remote-access VPNs. Wireless networks are increasingly popular due to their convenience and low cost. However, by definition they broadcast all packets over radio waves, so it's easy to eavesdrop on them. Network vendors made a feeble attempt to provide wired equivalent privacy by creating the wireless encryption standard of the same name (WEP), but weaknesses in WEP's cryptographic implementations have rendered it prematurely obsolete. Therefore, many organizations that use wireless LANs leave WEP turned off. Instead they use VPN tunnels to encrypt wireless links.
Returning to Figure 2, note that a single system can serve as a combined VPN/wireless gateway. Figure 3 shows an equally valid topology: the wireless and VPN gateways are separate devices.
As I stated earlier, IPSec is the most popular VPN protocol. Because it's an extension of the IP protocol, it's the “official” VPN protocol of the Internet. For almost as long as IPSec has existed, John Gilmore and the FreeS/WAN Project team have been doing their best to promote IPSec's widespread adoption by developing and giving away the FreeS/WAN package for Linux. For definitive information about and the latest version of FreeS/WAN, see their home page at www.freeswan.org. Suffice it to say, FreeS/WAN is mature, well documented and well supported. If you run Linux, FreeS/WAN is the choice for your VPN needs.
Like Netfilter, FreeS/WAN consists of a kernel module that does the actual work and user interfaces that are used to configure it. Unlike Netfilter, FreeS/WAN is not included in standard Linux kernel sources and therefore is not part of the stock kernels in most Linux distributions. This is due to many countries' crypto export restrictions.
Retrofitting and even recompiling your kernel might sound like an unwieldy way to install FreeS/WAN. However, a number of Linux distributions, including SuSE, Debian and Mandrake, have FreeS/WAN packages that work with those distributions' stock kernels. For users of Red Hat 7.3, RPM packages of IPSec-enabled kernels (both binary and source) and the FreeS/WAN setup tools can be downloaded from Steamballoon at rpms.steamballoon.com/freeswan.
Because I personally run SuSE and Red Hat the most, I'll describe how to obtain and install FreeS/WAN for them. See the documentation at www.freeswan.org/doc.html if your needs are more complex. Depending on your kernel and distribution, you may have to compile FreeS/WAN from source, but this is well documented on the web site.
Fast/Flexible Linux OS Recovery
On Demand Now
In this live one-hour webinar, learn how to enhance your existing backup strategies for complete disaster recovery preparedness using Storix System Backup Administrator (SBAdmin), a highly flexible full-system recovery solution for UNIX and Linux systems.
Join Linux Journal's Shawn Powers and David Huffman, President/CEO, Storix, Inc.
Free to Linux Journal readers.Register Now!
- The Italian Army Switches to LibreOffice
- Download "Linux Management with Red Hat Satellite: Measuring Business Impact and ROI"
- Petros Koutoupis' RapidDisk
- Linux Mint 18
- Oracle vs. Google: Round 2
- The FBI and the Mozilla Foundation Lock Horns over Known Security Hole
- Varnish Software's Varnish Massive Storage Engine
- Privacy and the New Math
- Ben Rady's Serverless Single Page Apps (The Pragmatic Programmers)