Radio E-mail in West Africa: The Complete Version
Sometime sooner than later, users in Kissidougou will want to try sending their own messages to others. If you have followed along with qmail this far, you may already have some ideas for getting mail back out from the field to any address on the internet. But it turns out there are a couple of tricky parts in sending e-mail from Kissidougou to other refugee.ngo users outside of Kissidougou, whether in Conakry or another field office. Figure 3. considers the case of sending a message from Kissidougou to a user in Conakry, addressed to email@example.com.
In Kissidougou as in Conakry, we want to keep the convention of addressing mail to users with firstname.lastname@example.org, no matter where the recipient is actually assigned. This means that refugee.ngo also must be listed in the locals control file on kenya, so qmail will accept and deliver mail originating on the local network in Kissi and addressed to recipients posted there. This avoids the delay and extra traffic of an unnecessary round trip to the mailhub in Conakry.
The question, then, is how to forward mail addressed to users at refugee.ngo, but who are not found locally. The first part of the solution is to set up fastforward in pass through mode by using the -p switch. With this option, if a user isn't found in the /etc/aliases database on kenya, fastforward exits 0, allowing the message to be processed by further instructions in the alias .qmail-default file.
Which brings us to the second part of the solution. As shown in the diagram, the second line in this file
uses qmail's forward utility to send any message to a refugee.ngo addressee not found locally, rewriting the domain part of the address as mailhub.refugee.ngo. In our example, the envelope address is rewritten as email@example.com and returns to qmail further processing.
Again qmail checks the locals control file, and this time finds no entry for mailhub.refugee.ngo. But now there is a matching entry in the virtualdomains control file. This particular entry, with the first field empty, is a form of qmail wildcard expression and has the effect of treating any domain as a virtual domain. In this case the entry
tells qmail to forward all messages for any domain to the user qrelay, prepending the string qrelay-ppp- to the original address. Now our outbound message will be addressed to firstname.lastname@example.org. (And any other internet-bound addresses would be rewritten likewise, such as email@example.com.)
Similar to the user qturn on the radiohub congo, qrelay is a special user account we set up on all field hosts, such as kenya, to receive all mail destined for outgoing delivery via HF radio modem. The qrelay user has a home directory of /var/qmail/qrelay, and the dot-qmail instructions in its ~/.qmail-ppp tell qmail to deliver to the Maildir mailbox ./.QMAIL.PPP/. Here the messages for all outbound mail will collect until our next PPP link over the radio. Then we will again use QMTP and serialmail, this time in the other direction.
When the link is up, the command sequence that sends the batch of collected mail to the radiohub in Conakry is:
# cd /var/qmail/qrelay # maildirqmtp .QMAIL.PPP qrelay-ppp- 10.0.10.241
As in the previous example, the first argument to maildirqmtp is the path to the Maildir directory containing all outgoing mail. The third argument is the IP address assigned to the radiohub end of the PPP connection. And the second argument is the prepended string to remove from each envelope address. Now when maildirqmtp sends the example message, it will be restored to firstname.lastname@example.org. (And any e-mail to guinix would be restored to email@example.com.)
Bounding wirelessly out of Kissi, following rainbows and hot harmattans, the message gracefully traverses the wilds and dangers of earthly terrain to arrive safely in Conakry on the radiohub congo. And here it won't linger. When qmail doesn't find any matching entry in the locals control file, it immediately queues the message for remote delivery. The entry in the smtproutes control file then has the wildcard effect of relaying the messages destined for any domain back to the mailhub server. This configuration purposely segregates the radiohub host as a server only for HF links, while using the mailhub host for all other e-mail services and administration.
When qmail receives the message on coyah, it now finds an entry in the locals control file for mailhub.refugee.ngo and initiates local delivery. In what by now should be a familiar sequence, fastforward matches lois.lion in the /etc/aliases database and passes the message for delivery to the llion user account. The message is then delivered to llion's POP3 mailbox, the Maildir named ./.QMAIL.POP/. Hungry for word from Ms. Rabbit in the field, Ms. Lion pounces on her mouse—and lo the message is deposited right to her own desktop.
What if lois.lion is reassigned to the field office in Nzerekore? The administrator would make the change in mailhub's /etc/aliases file and run the fastforward version of the newaliases command to update the fastforward database. Now qmail will turn messages for lois.lane around for delivery to firstname.lastname@example.org via HF radio, as in the rhonda.rabbit example. In this way Conakry serves as the central hub for all e-mail traffic, and field offices need never make links with one another directly.
|Happy Birthday Linux||Aug 25, 2016|
|ContainerCon Vendors Offer Flexible Solutions for Managing All Your New Micro-VMs||Aug 24, 2016|
|Updates from LinuxCon and ContainerCon, Toronto, August 2016||Aug 23, 2016|
|NVMe over Fabrics Support Coming to the Linux 4.8 Kernel||Aug 22, 2016|
|What I Wish I’d Known When I Was an Embedded Linux Newbie||Aug 18, 2016|
|Pandas||Aug 17, 2016|
- Download "Linux Management with Red Hat Satellite: Measuring Business Impact and ROI"
- Happy Birthday Linux
- Vi IMproved--Vim and Happy Hacking Keyboard Lite 2
- ContainerCon Vendors Offer Flexible Solutions for Managing All Your New Micro-VMs
- What I Wish I’d Known When I Was an Embedded Linux Newbie
- Updates from LinuxCon and ContainerCon, Toronto, August 2016
- Tech Tip: Really Simple HTTP Server with Python
- New Version of GParted
- NVMe over Fabrics Support Coming to the Linux 4.8 Kernel
With all the industry talk about the benefits of Linux on Power and all the performance advantages offered by its open architecture, you may be considering a move in that direction. If you are thinking about analytics, big data and cloud computing, you would be right to evaluate Power. The idea of using commodity x86 hardware and replacing it every three years is an outdated cost model. It doesn’t consider the total cost of ownership, and it doesn’t consider the advantage of real processing power, high-availability and multithreading like a demon.
This ebook takes a look at some of the practical applications of the Linux on Power platform and ways you might bring all the performance power of this open architecture to bear for your organization. There are no smoke and mirrors here—just hard, cold, empirical evidence provided by independent sources. I also consider some innovative ways Linux on Power will be used in the future.Get the Guide