Linux System Administration Tools
Linux old-timers revel in reminding newcomers that they used to have to do everything by hand, at the command line, uphill, both ways, with duct tape for shoes. What really gets some of these folks sputtering is today's collection of system administration tools that introduce quite a bit of automation. There's good reason for this, actually; if you don't know how to administer your system by hand then you are sunk if something goes wrong. However, this factor doesn't mean you shouldn't take advantage of available helping hands.
There are four major players in the world of Linux system administration tools: COAS, Linuxconf, Webmin and YaST. One of these, YaST, is tied specifically to SuSE Linux. The other three, COAS, Linuxconf and Webmin, come by default with some distributions but are independently available for download and installation.
Linuxconf (Figure 1) comes with Mandrake Linux and Red Hat Linux, but is also available for most modern Linux distributions. You've probably encountered this tool before if you use one of these distributions, either as the whole package or in one of its modular components. Multiple interfaces for Linuxconf have been available for years, but now we're up to four: GUI, Web, command-line and ncurses.
Linuxconf has actually been around for years, which means its bugs have had longer to shake out than the other distribution-neutral tools. You can download and find out more about this tool at www.solucorp.qc.ca/linuxconf. Be sure to read through what each portion of the Linuxconf package is used for. There is a base package with the non-GUI components, and then there are various GUI front-end pieces from a more general X Window System version to one specifically built for GNOME.
Whether you stick with the command-line version or add a GUI front end, you run the tool by typing linuxconf. From here you navigate text or point and click menus to access a wide variety of system settings, everything from basic networking details to GRUB configuration. Linuxconf also plays well with people who refuse to use the root account for anything but the most vital tasks. If you try to run it as root, the tool simply asks for the root password--if this fact makes you nervous, then you may want to consider not using this tool, but this practice is fairly standard in modern administration tools. When you consider that anyone could just try to su to the root account at whim, you start to see why it is so important to have a secure root password in place.
Webmin (Figure 2) comes with, and was recently acquired by, Caldera Linux. This tool is not only available for most modern Linux distributions, it also runs on most major flavors of UNIX and is available in around twenty languages (though some modules are not available in all of the languages). As you might guess, Webmin is purely a web-based application and a heavily modular one at that.
There is a set of core modules that handle the usual system administration functionality, and then there are the third-party modules available for administering a variety of packages and services. To download and learn more about Webmin, point your web browser to www.webmin.com/webmin. Once again, this package is available in a number of formats specific to different distributions.
Where any user can install Linuxconf, Webmin must be installed by root. After that you can access this tool from any user account as long as you know the root password.
There are three separate rows of icons on this tool's front page. On the upper right, you have a pair of administrative links, one to log you out of the Webmin tool and another that allows you to fill out a feedback form that sends your comments back to the Webmin team. In the same top row on the upper left you can click on the word Webmin and go to the product home page. On the upper bar directly beneath those links, there are a series of menu icons, which are, from left to right:
Webmin: takes you back to the main Webmin screen.
System: a collection of configuration issues, such as user and group manipulation, disk quotas and cron jobs.
Servers: configuration routines for a number of servers you may have installed on your system, such as Apache, WU-FTPD and sendmail.
Hardware: configuration utilities for hardware issues such as RAID, printers and disk partitions.
Cluster: a collection of cluster maintenance tools.
Others: a set of tools that system administrators typically need, such as a command prompt, an alias manager and a file manager.
Finally, there is the Webmin tab, which has a series of Webmin management tools:
Webmin Actions Log: if you've enabled Webmin logging, this function allows you to search through the logfiles for what you've utilized this tool to do to your system.
Webmin Configuration: takes you to the amazing number of configuration options available for Webmin, everything from strengthening your Webmin authentication requirements to upgrading either the main package or individual modules.
Free Webinar: Hadoop
How to Build an Optimal Hadoop Cluster to Store and Maintain Unlimited Amounts of Data Using Microservers
Realizing the promise of Apache® Hadoop® requires the effective deployment of compute, memory, storage and networking to achieve optimal results. With its flexibility and multitude of options, it is easy to over or under provision the server infrastructure, resulting in poor performance and high TCO. Join us for an in depth, technical discussion with industry experts from leading Hadoop and server companies who will provide insights into the key considerations for designing and deploying an optimal Hadoop cluster.
Some of key questions to be discussed are:
- What is the “typical” Hadoop cluster and what should be installed on the different machine types?
- Why should you consider the typical workload patterns when making your hardware decisions?
- Are all microservers created equal for Hadoop deployments?
- How do I plan for expansion if I require more compute, memory, storage or networking?
|Containers—Not Virtual Machines—Are the Future Cloud||Jun 17, 2013|
|Lock-Free Multi-Producer Multi-Consumer Queue on Ring Buffer||Jun 12, 2013|
|Weechat, Irssi's Little Brother||Jun 11, 2013|
|One Tail Just Isn't Enough||Jun 07, 2013|
|Introduction to MapReduce with Hadoop on Linux||Jun 05, 2013|
|Android's Limits||Jun 04, 2013|
- Containers—Not Virtual Machines—Are the Future Cloud
- Lock-Free Multi-Producer Multi-Consumer Queue on Ring Buffer
- Linux Systems Administrator
- Introduction to MapReduce with Hadoop on Linux
- Senior Perl Developer
- Technical Support Rep
- Weechat, Irssi's Little Brother
- UX Designer
- One Tail Just Isn't Enough
- Android's Limits
- Reply to comment | Linux Journal
36 min 11 sec ago
- Reply to comment | Linux Journal
36 min 38 sec ago
- Replica Watches
3 hours 1 min ago
- Reply to comment | Linux Journal
7 hours 12 min ago
- on the path to understanding
7 hours 15 min ago
- As a fisher,we know that a
1 day 2 hours ago
- All I Say Is Worth Share!
1 day 3 hours ago
1 day 4 hours ago
1 day 7 hours ago
- You should consider visiting
1 day 8 hours ago