InDepth: Configuring xdm
xdm is highly configurable; the following is only one way to configure it in order to accomplish a specific goal.
On my Red Hat 7 system, xdm lives in /etc/X11/xdm. Its main configuration file is xdm-config (see Listing 1).
xdm's configuration files are in X resource format. There are resources for the configuration of the locations of various files. We are interested in the files pointed to by the resources servers, accessFile and resources. The adventurous will be interested in the session and DisplayManager._X.setup, where X is the display number.
Notice that DisplayManager.requestPort:0 is commented out. This resource specifies which UDP port to use to listen for XDMCP requests. If it is set to 0 (as is the default), then XDMCP requests are ignored, and xdm only manages local displays (see Xservers file). We comment it out so that xdm will listen on the default port (USP port 177).
My Xservers file looks like this:
#:0 local /usr/X11R6/bin/X
If this line were not commented out, then I would get a graphical login screen every time I started xdm. That is, it would start and manage a local X server on display 0 by running the command /usr/X11R6/bin/X. What we want to be able to do is select the host that we will connect to. We accomplish this using the Xaccess file:
#any indirect host can get a chooser * CHOOSER BROADCAST # # If you'd prefer to configure the set of # hosts each terminal sees, # then just uncomment these lines # (and comment out the CHOOSER line above) # and edit the %hostlist line as appropriate # #%hostlist host-a host-b #* CHOOSER %hostlist #Although the Xaccess file is a very flexible tool, we will only be using it to launch the chooser (indirect mode). The chooser is a little X application that displays a list of available hosts on the network, allowing us to select the one to which we would like to connect. I like to use the BROADCAST option because new hosts show up in the list automatically. Some may prefer to name the hosts specifically, as shown using the %hostlist macro. This method is sometimes required, especially in larger networks where the broadcast doesn't reach all desired hosts.
If you are interested in a finer level of control, you can use a list of servers instead of BROADCAST. This will allow you to specify the list of available hosts directly.
If you want to configure xdm to handle requests from different X servers in different ways, you can specify a hostname or host list instead of *. Examples of this follow.
The following lines tell xdm to handle all queries from either host-a, host-b or host-c itself (Direct mode):
host-a host-b host-c
To tell xdm to send indirect queries from host-a to server-a or server-b, type
host-a server-a server-bIt could also be written
%hostlist server-a server-b host-a %hostlistYou can set up xdm to handle indirect queries using the chooser (our preferred method). In our next example, host-a gets a chooser window containing a list of all hosts that answer the BROADCAST, while everyone else gets only the list specified by %hostlist:
%hostlist server-a server-b host-a CHOOSER BROADCAST * CHOOSER %hostlist.Finally, to finish up the basic functionality, we can look at the Xresources file. I left mine with the defaults, but some might want to customize the look and feel a bit. In this file you can change colors, fonts and other style options. I've found the Chooser*geometry resource to be the most useful because it allows you to set the size of the chooser application window.
You can configure some administrative functions in xdm-config as well. Things like DisplayManager.errorLogFilelogfile will set the location of the log file. This log file contains the stderr output of xdm, Xsetup, Xstartup, Xsession and Xreset scripts.
Upon successful logon-process completion, xdm launches the script file specified in the session resource. This allows users to customize the behavior of the X sessions. Administrators will most likely want to check out the Xsession script. Users will want to create a $HOME/.xsession or $HOME/.Xclients file to customize the behavior of the session manager (i.e., start a window manager, a clock, etc.).
In order to test our configuration, we need to find X (which X). On my system, it's in /usr/X11R6/bin/X. In any case, you should end up seeing a logon screen. To test direct mode you would type
/usr/X11R6/bin/X -query remotexdmhost
For indirect broadcast mode type
/usr/X11R6/bin/X -broadcastAnd for indirect mode using the chooser, type
/usr/X11R6/bin/X -indirect remotexdmhostOnce these were working, I created the /etc/rc.d/init.d script to auto-start and auto-stop the xdm service. See the article on using the chkconfig utility in the April 2001 Linux Journal for more information.
Then, I created the following scripts to make life simple for my users. On their workstations, I create a file named /usr/bin/X11/startx.xdmcp. If the host is called “wkstn1”, then the file contains
#!/bin/sh /usr/X11R6/bin/X -indirect wkstn1
where hostname is the name of the xdm server (in my case the workstations are both an xdm server and an X server).
Next, I entered
mv /usr/bin/X11/startx /usr/bin/X11/startx.original chmod 755 /usr/bin/X11/startx.xdmcp ln -s /usr/bin/X11/startx.xdmcp /usr/bin/X11/startx
This allows any user who may be used to logging in to their workstation and typing startx to get a console, to instead receive a list of available hosts to log in to (including their own workstation).
Practical Task Scheduling Deployment
July 20, 2016 12:00 pm CDT
One of the best things about the UNIX environment (aside from being stable and efficient) is the vast array of software tools available to help you do your job. Traditionally, a UNIX tool does only one thing, but does that one thing very well. For example, grep is very easy to use and can search vast amounts of data quickly. The find tool can find a particular file or files based on all kinds of criteria. It's pretty easy to string these tools together to build even more powerful tools, such as a tool that finds all of the .log files in the /home directory and searches each one for a particular entry. This erector-set mentality allows UNIX system administrators to seem to always have the right tool for the job.
Cron traditionally has been considered another such a tool for job scheduling, but is it enough? This webinar considers that very question. The first part builds on a previous Geek Guide, Beyond Cron, and briefly describes how to know when it might be time to consider upgrading your job scheduling infrastructure. The second part presents an actual planning and implementation framework.
Join Linux Journal's Mike Diehl and Pat Cameron of Help Systems.
Free to Linux Journal readers.Register Now!
- Murat Yener and Onur Dundar's Expert Android Studio (Wrox)
- SUSE LLC's SUSE Manager
- My +1 Sword of Productivity
- Managing Linux Using Puppet
- Non-Linux FOSS: Caffeine!
- Tech Tip: Really Simple HTTP Server with Python
- SuperTuxKart 0.9.2 Released
- Doing for User Space What We Did for Kernel Space
- Google's SwiftShader Released
- Parsing an RSS News Feed with a Bash Script
With all the industry talk about the benefits of Linux on Power and all the performance advantages offered by its open architecture, you may be considering a move in that direction. If you are thinking about analytics, big data and cloud computing, you would be right to evaluate Power. The idea of using commodity x86 hardware and replacing it every three years is an outdated cost model. It doesn’t consider the total cost of ownership, and it doesn’t consider the advantage of real processing power, high-availability and multithreading like a demon.
This ebook takes a look at some of the practical applications of the Linux on Power platform and ways you might bring all the performance power of this open architecture to bear for your organization. There are no smoke and mirrors here—just hard, cold, empirical evidence provided by independent sources. I also consider some innovative ways Linux on Power will be used in the future.Get the Guide