The 101 Uses of OpenSSH: Part I
Secure Shell works very similarly to Secure Sockets Layer web transactions (it's no coincidence that the cryptographical functions used by OpenSSH are provided by OpenSSL, a free version of Netscape's Secure Sockets Layer source-code libraries). Both can set up encrypted channels using generic “host keys” or with published credentials (digital certificates) that can be verified by a trusted certificate authority (such as VeriSign). Here's how connections are built.
First, the client and the server exchange (public) host keys. If the client machine has never encountered a given public key before, both ssh and most web browsers ask the user whether to accept the untrusted key. Next, they use these to negotiate a session key that is used to encrypt all subsequent session data via a block cipher such as Triple-DES (3DES), blowfish, or idea.
Then, the server attempts to authenticate the client using RSA or DSA certificates. If this isn't possible, the client is prompted for a standard username/password combination (optionally, “rhosts” host-IP-based authentication with or without RSA keys may be used; OpenSSH also supports KerberosIV and skey). Finally, after successful authentication the session proper begins: either a remote shell, a secure file transfer, a remote command, etc., is begun over the encrypted tunnel.
As I mentioned earlier, ssh is actually a suite of tools:
sshd—dæmon that acts as a server to all other commands
ssh—primary end-user tool: remote shell, remote command, and port-forwarding sessions
scp—tool for automated file transfers
sftp—tool for interactive file transfers—COMMERCIAL SSH ONLY
ssh-keygen—generates private-public key pairs for use in RSA and DSA authentication (including host keys)
ssh-agent—dæmon used to automate client's RSA/DSA authentications
ssh-add—loads private keys into ssh-agent process
ssh-askpass—X interface for ssh-add
Note that sftp, which is essentially an ftp client with encryption and strong authentication grafted on, is available only in F-Secure's commercial versions of ssh version 2—I only mention it here because you may come across a reference to it elsewhere and wonder why you've only got scp.
Of these tools, most users concern themselves only with ssh, since “encrypted Telnet” is the simplest use of ssh. Scp, ssh-agent and ssh-add, however, along with the strong authentication and TCP port-forwarding capabilities of ssh itself, make ssh considerably more flexible than that. Since we're paranoid and want to encrypt as much of the stuff we fling over the networks as possible, we really groove on this flexibility.
The OpenSSH web site (see Resources) is the place to go for the latest version of OpenSSH, both in source-code and RPM forms, and also for OpenSSL, which is required by OpenSSH. Also required is zlib, available at the freesoftware.com site (see Resources).
Note that you may not be able to get by with RPM packages. When I tried to install the RPMs from OpenSSH.com on my laptop, running SuSE Linux, everything worked except sshd, which wouldn't install due to SuSE's lack of a “chkconfig” package. Your preferred flavor of Linux may or may not have the same problem (unless it has chckconfig), or it may have its own RPM of OpenSSH (for all I know, by the time you read this somebody may have published RPMs for SuSE).
If RPMs won't work, you'll need to build OpenSSH (and possibly OpenSSL and zlib) from source. To Linux old-timers, “rolling your own” software installations is old hat, but if you're not in that category don't despair. All three distributions use “.configure” scripts that eliminate the need for most users to edit any Makefiles. Assuming your system has gcc and the normal assortment of system libraries and that these are reasonably up-to-date, the build process is both fast and simple.
In my own case, after installing OpenSSL 0.9.5a and zlib-1.1.3 (all version numbers, by the way, may be outdated by the time you read this!) I followed these steps to build and install OpenSSH 2.1.1p4:
tar -xzvf openssh-2.1.1p4.tar.gz cd openssh-2.1.1p4 ./configure --sysconfdir=/etc/ssh make make install
Per instructions provided by the file “INSTALL” I fed the configure script one customized option: rather than installing all configuration-files in /etc, I instructed it to create and use a subdirectory, /etc/sshd. Since this version of OpenSSH supports both RSA and DSA keys, it makes sense to minimize the amount of clutter ssh adds to /etc.
For a client-only installation, this is all you need to do. Note that one or more of the version numbers cited above may already be dated by the time you read this article; be sure to check the OpenSSH and zlib web sites for the latest versions.
If you wish to run the Secure Shell Dæmon sshd (i.e., you wish to accept ssh connections from remote hosts), you'll also need to create startup scripts and, in the case of SuSE, edit /etc/rc.config. This has also been thought of for you: the source distribution's “contrib” directory contains some useful goodies.
The Red Hat directory contains “sshd.init”, which can be copied to /etc/rc.d and linked to in the appropriate runlevel directory (/etc/rc.d/rc2.d, etc.). It also contains “sshd.pam”, which can be installed in /etc/pam if you use Pluggable Authentication Modules (PAM) and “openssh.spec”, which can be used to create your very own OpenSSH RPM package. These files are, obviously, intended for use on Red Hat systems but will probably also work on Red Hat-derived systems (Mandrake, Yellow Dog, etc.).
The suse directory also contains an “openssh.spec” file for creating OpenSSH prpm packages for SuSE and an “rc.sshd” file to install in /etc/rc.d (actually /sbin/init.d in SuSE). In addition, it contains “rc.config.ssd”, the contents of which must be added to /etc/rc.config in order for the rc.sshd script to work properly. This is achieved by simply entering the command:
cat ./rc.config.ssd >> /etc/rc.config
Create a symbolic link in rc2.d and/or rc3.d, and your SuSE system is ready to serve up secured shells! Either reboot or type /etc/rc.d/rc.sshd start to start the dæmon.
Practical Task Scheduling Deployment
July 20, 2016 12:00 pm CDT
One of the best things about the UNIX environment (aside from being stable and efficient) is the vast array of software tools available to help you do your job. Traditionally, a UNIX tool does only one thing, but does that one thing very well. For example, grep is very easy to use and can search vast amounts of data quickly. The find tool can find a particular file or files based on all kinds of criteria. It's pretty easy to string these tools together to build even more powerful tools, such as a tool that finds all of the .log files in the /home directory and searches each one for a particular entry. This erector-set mentality allows UNIX system administrators to seem to always have the right tool for the job.
Cron traditionally has been considered another such a tool for job scheduling, but is it enough? This webinar considers that very question. The first part builds on a previous Geek Guide, Beyond Cron, and briefly describes how to know when it might be time to consider upgrading your job scheduling infrastructure. The second part presents an actual planning and implementation framework.
Join Linux Journal's Mike Diehl and Pat Cameron of Help Systems.
Free to Linux Journal readers.Register Now!
- SUSE LLC's SUSE Manager
- My +1 Sword of Productivity
- Managing Linux Using Puppet
- Non-Linux FOSS: Caffeine!
- Murat Yener and Onur Dundar's Expert Android Studio (Wrox)
- SuperTuxKart 0.9.2 Released
- Google's SwiftShader Released
- Doing for User Space What We Did for Kernel Space
- Parsing an RSS News Feed with a Bash Script
- SourceClear Open
With all the industry talk about the benefits of Linux on Power and all the performance advantages offered by its open architecture, you may be considering a move in that direction. If you are thinking about analytics, big data and cloud computing, you would be right to evaluate Power. The idea of using commodity x86 hardware and replacing it every three years is an outdated cost model. It doesn’t consider the total cost of ownership, and it doesn’t consider the advantage of real processing power, high-availability and multithreading like a demon.
This ebook takes a look at some of the practical applications of the Linux on Power platform and ways you might bring all the performance power of this open architecture to bear for your organization. There are no smoke and mirrors here—just hard, cold, empirical evidence provided by independent sources. I also consider some innovative ways Linux on Power will be used in the future.Get the Guide