Linux Job Scheduling
These time specifications may be optionally followed by a date specification. Date specifications come in a number of forms, including:
These mean what you would expect. “at teatime tomorrow” will run the commands at 4 p.m. the following day. Note that if you specify a time already passed (as in “at noon today” when it is 3 p.m.), the job will be run at once. You do not get an error. At first you might think this a bad thing, but look at it this way. What if the system had been down since 10 a.m. and was only being restarted now at 3 p.m.? Would you want a critical job skipped, or would you want it to run as soon as possible? The at system takes the conservative view and assumes you will want the job run.
<month_name> <day> [<year>]where month_name is “jan” or “feb”, etc., and day is a day number. The year is optional, and should be a four-digit year, of course.
MM/DD/YYYY YYYY-MM-DDDon't listen to what the “man at” page tells you! At least in Red Hat 6.1, it is wrong! I suspect it is wrong in certain other releases as well, and I'm willing to bet this is because the documentation has not caught up with Y2K fixes to this subsystem. The at shipped with Red Hat 6.1 handles dates in the two formats above. It appears to handle 2-digit years correctly, turning values less than 50 into 20xx and those greater than 50 into 19xx. I did not test to find the exact pivot point, and I do not recommend that you bother to, either. If you use two-digit years at this point, be prepared to pay a price! Depending on your version of at to treat two-digit years a certain way is foolish. Use four-digit years. Haven't we learned our lesson? (If you worked with computers from 1995 to 1999, you felt the pain as work came to an almost complete halt while we pored over every system with microscopes, looking for date flaws in the designs of our systems. Don't make a Y2.1K problem! PLEASE!!!)
Another way you can modify a time specification is to apply a relative time to it. The format of a relative time specification is + <count> <time units>, where “count” is simply a number and “time units” is one of “minutes”, “hours”, “days” or “weeks”.
So, you can say:
at 7pm + 2 weeks
and the programs will be scheduled for two weeks from today at 7 p.m. local time.
One of the most common forms is this:
at now + x units
to specify a program or programs to be run so many units from now. Something I often use this for is in shutting down my home machine's dial-up connection from work. I dial in before I leave for work, and then I kill it before my wife gets home (I'm too cheap to buy a second line). I use ssh to log in from work, and I like to close all my windows cleanly, so I frequently do something like this:
# ps fax | grep wvdial 599 ? S 0:00 \_ wvdial 875 pts/2 S 0:00 \_ grep wvdial # at now + 10 minutes at> kill 599 at> warning: commands will be executed using /bin/sh job 9 at 2000-04-17 16:30 # exit $ exitI then have ten minutes to disconnect cleanly from my home system before my phone connection gets dropped.
Note that the plain old Bourne shell is used for all commands run by at. (Also note: I had to type ctrl-d, the *nix EOF character to close the interactive at session. More on this in the section on the at command line. This is just one factor affecting the behavior of at scheduled commands. Here are some other facts to bear in mind. The present working directory, environment variables (with three exceptions, see below), the current userid and the umask that were in effect when the at command was issued are retained and will be used when the commands are executed. The three environment variable exceptions are TERM, DISPLAY and “_” (which usually contains the last command executed in the shell). The output of the commands is mailed to the user who issued the at command. If the at command is issued in an su shell (meaning, if you “became” another user), the output mail will be sent to the login user, but the programs will run under the su user.
The ability to use at is controlled by two files: /etc/at.deny and /etc/at.allow.
The /etc/at.allow file is checked first. If it exists, only user names in this file are allowed to run at. If the /etc/at.allow file does not exist, then the /etc/at.deny file is checked. All user names not mentioned in that file may run at.
If neither file exists, only the superuser may run at.
Webinar: 8 Signs You’re Beyond Cron
On Demand NOW
Join Linux Journal and Pat Cameron, Director of Automation Technology at HelpSystems, as they discuss the eight primary advantages of moving beyond cron job scheduling. In this webinar, you’ll learn about integrating cron with an enterprise scheduler.View Now!
|My Humble Little Game Collection||May 28, 2015|
|New Linux Based OS Brings Internet of Things Closer to Reality||May 27, 2015|
|Non-Linux FOSS: All the Bitcoin, None of the Bloat||May 26, 2015|
|Dr Hjkl on the Command Line||May 21, 2015|
|Initializing and Managing Services in Linux: Past, Present and Future||May 20, 2015|
|Goodbye, Pi. Hello, C.H.I.P.||May 18, 2015|
- My Humble Little Game Collection
- New Linux Based OS Brings Internet of Things Closer to Reality
- Initializing and Managing Services in Linux: Past, Present and Future
- Using Hiera with Puppet
- Dr Hjkl on the Command Line
- Non-Linux FOSS: All the Bitcoin, None of the Bloat
- Infinite BusyBox with systemd
- Gartner Dubs DivvyCloud Cool Cloud Management Vendor
- Goodbye, Pi. Hello, C.H.I.P.
- It's Easier to Ask Forgiveness...