PoPToP, a Secure and Free VPN Solution
Traditionally, remote access for employees has been through dedicated lines or a remote access server (RAS). A RAS typically consists of a collection of modems and telephone lines connected to a central machine. RAS can be quite reliable and secure, but it is expensive in its setup and long-distance-call costs. A Virtual Private Network (VPN) offers a secure, flexible and cheap solution in place of RAS and dedicated lines. PoPToP, the PPTP (point-to-point tunneling protocol) VPN solution for Linux, is a free VPN solution that businesses can take advantage of now.
A virtual private network is a private network capable of communicating over the public Internet infrastructure with a defined level of security. VPNs can exist between two or more private networks, often referred to as a server-server VPN, or between individual client machines and private networks, often referred to as a client-server VPN (see Figure 1). VPNs overcome the need for expensive dedicated lines or RAS dial in call and setup costs.
In Figure 1, the remote client is handed a real IP address from their local ISP. This remote client can log into the VPN server, and hence gain access to the private network behind the firewall. The remote client can then browse and use other network services on the private network as if it were a machine on that network.
VPNs may also exist between multiple private networks (server-server VPN). For example, suppose your company has an R&D office in Australia and a sales and marketing office in the United States. Both locations have private networks that are connected to the Internet (the method, modem, DSL or something else, is transparent to the VPN). Traditionally, if the offices wish to share files on their networks, they would either have to e-mail the files to each other, dial in to each other or have some form of dedicated link between them. VPNs offer a cost-effective solution for joining these two networks seamlessly, without compromising system security.
The most popular VPN technologies available today are PPTP and IPsec. Much debate and analysis has occurred recently between proponents of these competing VPN technologies. Both PPTP and IPsec have an important role to play in VPN solutions. But neither PPTP nor IPsec is without flaws.
PPTP is an open-documented standard published by the Internet Engineering Task Force (IETF) as RFC 2637, available at ftp.ietf.org/rfc/rfc2637.txt.
The operation of PPTP as a VPN is performed by encapsulating the point-to-point protocol (PPP) in IP and tunneling it through an IP network. All communication, authentication and encryption is handled almost exclusively by PPP, which currently supports PAP, CHAP, MSCHAP and MSCHAPv2 authentication. PPP encryption is performed through compressor modules, and available patches under Linux allow PPP to support RC4-compatible 40-128-bit encryption. Some people make the mistake of assuming that since PPTP uses PPP, you need a modem. This is not the case. In fact, the connection mechanism to the IP network is transparent to PPTP.
PPTP is widely deployed in both client and server forms due to its default existence in Microsoft Windows platforms.
IPsec is a new series of authentication and encryption security protocols that can be employed for sending data securely over IP networks. IPsec offers encryption, authentication, integrity and replay protection to network traffic. IPsec also specifies a key management protocol for establishing encryption keys. IPsec, like PPTP, is an open standard developed by the IETF.
PPTP is transparent to the authentication and encryption mechanism. Microsoft's version of PPTP was recently upgraded to include MSCHAPv2 and MPPE-enhanced (and more secure) security protocols. Patches are available for the Linux PPP daemon that allow PPTP solutions such as PoPToP to take advantage of Microsoft's enhanced VPN security.
Bruce Schneier, Chief Technical Officer of Counterpane Internet Security, Inc., and perhaps the chief guru of Internet security, recently analyzed Microsoft's MSCHAPv2 and MPPE security protocols. Schneier concluded that this release of MSCHAPv2 from Microsoft addressed the major security weaknesses found in MSCHAP.
IPsec was also recently analyzed by Schneier (with the help of Niels Ferguson). In their analysis, they concluded that IPsec's complexity effectively makes it impossible to implement a secure solution. They believe IPsec will never result in a secure operational system. They emphasize that although IPsec has its flaws, it is a more secure solution than PPTP.
IPsec remains a new technology, and future improvements are sure to enhance its security further and increase its attractiveness to business. Additionally, with its default presence in Windows 2000, IPsec will offer small to medium-sized businesses a more secure and affordable solution.
Affordable PPTP VPN (with MSCHAPv2 and 40-128-bit RC4 encryption) is available now. With the countless Windows machines already out there supporting PPTP VPN, the cost-effective solution is obvious. Windows 98 has VPN client software as an install option. Windows NT 4.0 comes with PPTP (server and client) by default. Patches (Microsoft Dial-up Networking patch) exist for upgrading Windows 95 machines to include a PPTP client. Windows 2000 has PPTP by default.
- Reply to comment | Linux Journal
3 hours 54 min ago
18 hours 21 min ago
- Why choose a Flash based product?
18 hours 58 min ago
1 day 7 hours ago
1 day 23 hours ago
- Thanks for clearing that up.
2 days 4 hours ago
- Nice coding on the cake. I
2 days 16 hours ago
- Baker's identity
2 days 21 hours ago
- Uber jealous
3 days 2 hours ago
- Reality is disapointing
3 days 12 hours ago