IBM's Universal Database
Installing DB2 is made easy by an installation and setup utility called DB2 Installer. This utility will install all required packages for DB2, create instances for DB2 databases and administration support, and configure your DB2 server for communications. The instructions in this section assume you do not change any of the defaults presented by DB2 Installer, unless noted in the steps below.
You will usually run into display problems if you start DB2 Installer from a command window in your Linux distribution's graphical interface. You can refresh the view of DB2 Installer at any time by pressing CTRL-L. To avoid most potential display problems, I recommend running the DB2 Installer in a virtual console session outside of your operating system's graphical interface. You can shift between the virtual console session and the graphical interface session on most Linux distributions by pressing CTRL-ALT-F1 and CTRL-ALT-F7. Refer to your Linux documentation for more details.
To quickly install DB2, perform the following steps:
Log on to the system as a user with root authority
Mount the DB2 product CD-ROM by entering the following command:
mount -t iso9660 -o ro /dev/cdrom /mnt/cdrom
where /mnt/cdrom is the mount point of the CD-ROM. Note that even if you are installing DB2 on a workstation that is running TurboLinux version 3.6 or Red Hat Linux version 6.1, you still need to mount the CD-ROM. The image created by the install fix links to the DB2 CD-ROM. For more information, refer to your fix's readme.txt file.
Change focus to the mount point of the CD-ROM. Note that if you were installing DB2 on a workstation that is running TurboLinux version 3.6 or Red Hat Linux version 6.1, you would change to the directory where you created the image on your workstation. For more information, refer to your fix's readme.txt file.
Enter the ./db2setup command to start the DB2 Installer program. The Install DB2 V6.1 window will open. The contents of this window vary with respect to the DB2 product you are installing. Figure 1 is the window displayed when you are installing DB2 Workgroup Edition for Linux.
tab key to move the selector bar, and the ENTER key to select or deselect an option. For more information or assistance during the installation of DB2, select Help. From the product list, select the DB2 product you want to install. For this example, select DB2 UDB Workgroup Edition, then OK. The Create DB2 Services window will open.
Select the “Customize” option beside the DB2 product you want to install. For our example, select the “Customize” option beside the DB2 UDB Workgroup Edition option.
Select the “Java Support” and the “Control Center” components.
Select the “Create a DB2 Instance” option. Enter a password for this user and verify it by retyping this password in the field provided.
Select the “Properties” option.
Select the “Create a Sample Database” for a DB2 instance then OK.
A window will open that asks you to create a user that will be used to execute user-defined functions (UDFs) and stored procedures. For this example, you do not need to know anything about, or use, this user. Simply enter a password for this user, verify it and select OK. You are returned to the DB2 Create Services window. For more information on UDFs or stored procedures, refer to the “Administration Guide”.
Select the “Create the Administration Server” option. Enter a password for this user as well and select OK.
A pop-up window will open telling you the DB2 system's name for this workstation. Select OK. You are again returned to the Create DB2 Services window.
Select OK, then Continue, and finally, OK to begin the installation. When the installation completes, respond to the DB2 Installer's prompts to close this utility.
You are finished all the steps necessary to install DB2!
Now that you have finished your installation, let's go through a quick sample query to prove to you that this powerful database is actually alive and running on your system.
To verify your installation, perform the following steps:
Log on to the system as the db2inst1 user. If you use the su command to do this, ensure that you enter this command with the - option; for example, su - db2inst1.
Enter the following command to connect to the sample database created by DB2 Installer:
db2 connect to sample
You should receive output that is similar to the following:
Database Connection Information Database server = DB2/LINUX 6.1.0 SQL authorization ID = DB2INST1 Local database alias = SAMPLE
Enter the following command to select a list of all employees who belong to department 20 in the staff table:
db2 "select * from staff where dept = 20"
Note that you must enter this command using the quotation marks so that your operating system does not confuse the SQL statement with a command. You should receive output that is similar to that shown in Table 1.
End the database connection by entering the following command: db2 terminate.
Webinar: 8 Signs You’re Beyond Cron
On Demand NOW
Join Linux Journal and Pat Cameron, Director of Automation Technology at HelpSystems, as they discuss the eight primary advantages of moving beyond cron job scheduling. In this webinar, you’ll learn about integrating cron with an enterprise scheduler.View Now!
|New Linux Based OS Brings Internet of Things Closer to Reality||May 27, 2015|
|Non-Linux FOSS: All the Bitcoin, None of the Bloat||May 26, 2015|
|Dr Hjkl on the Command Line||May 21, 2015|
|Initializing and Managing Services in Linux: Past, Present and Future||May 20, 2015|
|Goodbye, Pi. Hello, C.H.I.P.||May 18, 2015|
|Using Hiera with Puppet||May 14, 2015|
- New Linux Based OS Brings Internet of Things Closer to Reality
- Dr Hjkl on the Command Line
- Non-Linux FOSS: All the Bitcoin, None of the Bloat
- Initializing and Managing Services in Linux: Past, Present and Future
- Using Hiera with Puppet
- Gartner Dubs DivvyCloud Cool Cloud Management Vendor
- Goodbye, Pi. Hello, C.H.I.P.
- Infinite BusyBox with systemd
- It's Easier to Ask Forgiveness...
- A More Stable Future for Ubuntu