Letters to the Editor
I recently purchased Applixware 4.4.1. My reason for purchasing it was so that I could interoperate with co-workers who run MS Office. Applixware has the best MS Office import filters I have seen, but they are not quite perfect. I found that while text and tables seem to import well, figures are another story. So far, I have only tried importing a few MS Word 7.0 documents, but in general, the figures fail to convert. I recognize the complexity of the conversion task, and I applaud Applix for doing as well as it does. I hope the filters continue to mature, so that I can finally dump Windows 95 off my machine and use Linux exclusively.
—Steve Falco email@example.com
I know that it is late to correct an erratum in the February issue; nevertheless, I think Linux Journal is a magazine to read and save for later use, so even such a late correction could be of some benefit.
The error is in Listing 5 of the article “Attaching Files to Forms”, in the column “At the Forge” on page 93. This listing should contain the following line between lines 2 and 3:
no strict "refs";
If this line is not present, the Perl interpreter will abort the script as soon as the variable reference $userfile is used for write. The uploaded file will be created but not written, i.e., it will have zero length.
—Aldo Mozzi firstname.lastname@example.org
In the November LJ, “Best of Technical Support” had a question regarding installing Linux (specifically X) on an IBM Thinkpad 365. There is an excellent article regarding this in Linux Gazette, http://www.ssc.com/lg/issue21/notebook.html.
I was able to get X working on Thinkpad using this guide, and the author, Sam Trenholme, was extremely helpful in getting me over a few problems when I contacted him via e-mail.
—Nate Dutra email@example.com
Your fine web site, http://www.linuxresources.com is usually the first thing I check on weekdays when I boot up. You have helped me greatly in learning about Linux.
Thank you very much for reporting on Dr. Meyer, Eiffel and Design by Contract. Here are three open-source Eiffel and Design by Contract resources:
SmallEiffel, the official GNU Eiffel: http://www.loria.fr/projets/SmallEiffel/
TOM, a new GPL/LGPL OO language with multiple inheritance and Design by Contract traits: http://gerbil.org/tom/
A page I edit: http://www.newhoo.com/Computers/Programming_Languages/Eiffel/
—Jerry Fass firstname.lastname@example.org
Last week I decided to totally change over to Linux after reading the latest horror story about Windows. Apparently, people connected to the Internet on W-95-98 can be snooped on simply by typing their IP number and a few backslashes. Suddenly, their whole system appears in the other person's MS Explorer window.
So here I am, scurrying to get a faster motherboard and a bigger hard drive. I am all enthusiastic about the new KDE and GNOME projects, yet when I read the installation manuals—S.u.S.E. or Red Hat—I am horrified by how much totally new and alien system configuration is needed for a new Linux user. The problem is exemplified by the marvelous advertising flyer sent out by S.u.S.E. for its 5.2 release. It seduces the user with a DOS-Windows box packed with a lifetime accumulation of precious utilities. It implies that UNIX clones for these treasures (and more) effortlessly await on the new Linux user's desktop. The actual case is that this happens only after endless installations and configurations.
The open-source concept has been much in the news lately, yet it seems that these installation processes are the one place where the open-source environment is not used to evolve solutions to these problems. Rather, it is the special province of the private bundling companies. Regardless of whether they put their products in the public domain, they are not developed in the open. People seem to believe that the greed of these companies will produce the fastest results, but I have not seen any miracles yet. Perhaps there are installation projects underway in the open-source community. If so, nothing could be more critical to the advancement of Linux.
We often hear people crowing in LJ that some huge corporation or the defense department is now more efficient because of Linux. I am much more impressed by ease of use by the ordinary person. If LJ were to make open-source installation projects a continuing focus of articles, it could do an incredible service to the evolution and spread of Linux.
—David Briars email@example.com
Easier installation seems to be what everyone is asking for these days. Red Hat is working on it with LinuxConf, and Caldera with COAS (see article in this issue) —Editor
|Designing Electronics with Linux||May 22, 2013|
|Dynamic DNS—an Object Lesson in Problem Solving||May 21, 2013|
|Using Salt Stack and Vagrant for Drupal Development||May 20, 2013|
|Making Linux and Android Get Along (It's Not as Hard as It Sounds)||May 16, 2013|
|Drupal Is a Framework: Why Everyone Needs to Understand This||May 15, 2013|
|Home, My Backup Data Center||May 13, 2013|
- Linux Systems Administrator
- New Products
- Senior Perl Developer
- Technical Support Rep
- UX Designer
- Designing Electronics with Linux
- Dynamic DNS—an Object Lesson in Problem Solving
- Using Salt Stack and Vagrant for Drupal Development
- Making Linux and Android Get Along (It's Not as Hard as It Sounds)
- Have you tried Boxen? It's a
52 min 4 sec ago
- seo services in india
5 hours 23 min ago
- For KDE install kio-mtp
5 hours 24 min ago
- Evernote is much more...
7 hours 24 min ago
- Reply to comment | Linux Journal
16 hours 9 min ago
- Dynamic DNS
16 hours 43 min ago
- Reply to comment | Linux Journal
17 hours 42 min ago
- Reply to comment | Linux Journal
18 hours 32 min ago
- Not free anymore
22 hours 34 min ago
1 day 2 hours ago
Enter to Win an Adafruit Pi Cobbler Breakout Kit for Raspberry Pi
It's Raspberry Pi month at Linux Journal. Each week in May, Adafruit will be giving away a Pi-related prize to a lucky, randomly drawn LJ reader. Winners will be announced weekly.
Fill out the fields below to enter to win this week's prize-- a Pi Cobbler Breakout Kit for Raspberry Pi.
Congratulations to our winners so far:
- 5-8-13, Pi Starter Pack: Jack Davis
- 5-15-13, Pi Model B 512MB RAM: Patrick Dunn
- 5-21-13, Prototyping Pi Plate Kit: Philip Kirby
- Next winner announced on 5-27-13!
Free Webinar: Hadoop
How to Build an Optimal Hadoop Cluster to Store and Maintain Unlimited Amounts of Data Using Microservers
Realizing the promise of Apache® Hadoop® requires the effective deployment of compute, memory, storage and networking to achieve optimal results. With its flexibility and multitude of options, it is easy to over or under provision the server infrastructure, resulting in poor performance and high TCO. Join us for an in depth, technical discussion with industry experts from leading Hadoop and server companies who will provide insights into the key considerations for designing and deploying an optimal Hadoop cluster.
Some of key questions to be discussed are:
- What is the “typical” Hadoop cluster and what should be installed on the different machine types?
- Why should you consider the typical workload patterns when making your hardware decisions?
- Are all microservers created equal for Hadoop deployments?
- How do I plan for expansion if I require more compute, memory, storage or networking?