What's GNU: Bash - The GNU Shell
Bash is the shell, or command language interpreter, that will appear in the GNU operating system. The name is an acronym for the “Bourne-Again SHell”, a pun on Steve Bourne, the author of the direct ancestor of the current Unix shell /bin/sh, which appeared in the Seventh Edition Bell Labs Research version of Unix.
Bash is an sh-compatible shell that incorporates useful features from the Korn shell (ksh) and the C shell (csh), described later in this article. It is ultimately intended to be a faithful implementation of the IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2). It offers functional improvements over sh for both interactive and programming use.
While the GNU operating system will most likely include a version of the Berkeley shell csh, Bash will be the default shell. Like other GNU software, Bash is quite portable. It currently runs on nearly every version of Unix and a few other operating systems-an independently-supported port exists for OS/2, and there are rumors of ports to DOS and Windows NT. Ports to Unix- like systems such as QNX and Minix are part of the distribution.
POSIX is a name originally coined by Richard Stallman for a family of open system standards based on Unix. There are a number of aspects of Unix under consideration for standardization, from the basic system services at the system call and C library level to applications and tools to system administration and management. Each area of standardization is assigned to a working group in the 1003 series.
The POSIX Shell and Tools standard has been developed by IEEE Working Group 1003.2 (POSIX.2). It concentrates on the command interpreter interface and utility programs commonly executed from the command line or by other programs. An initial version of the standard has been approved and published by the IEEE, and work is currently underway to update it. There are four primary areas of work in the 1003.2 standard:
Aspects of the shell's syntax and command language. A number of special builtins such as cd and exec are being specified as part of the shell, since their functionality usually cannot be implemented by a separate executable;
A set of utilities to be called by shell scripts and applications. Examples are programs like sed, tr and awk. Utilities commonly implemented as shell builtins are described in this section, such as test and kill. An expansion of this section's scope, termed the User Portability Extension, or UPE, has standardized interactive programs such as vi and mailx;
A group of functional interfaces to services provided by the shell, such as the traditional system() C library function. There are functions to perform shell word expansions, perform filename expansion (globbing), obtain values of POSIX.2 system configuration variables, retrieve values of environment variables (getenv()), and other services;
A suite of “development” utilities such as c89 (the POSIX.2 version of cc), and yacc.
Bash is concerned with the aspects of the shell's behavior defined by POSIX.2. The shell command language has of course been standardized, including the basic flow control and program execution constructs, I/O redirection and pipelining, argument handling, variable expansion, and quoting. The special builtins, which must be implemented as part of the shell to provide the desired functionality, are specified as being part of the shell; examples of these are eval and export. Other utilities appear in the sections of POSIX.2 not devoted to the shell which are commonly (and in some cases must be) implemented as builtin commands, such as read and test. POSIX.2 also specifies aspects of the shell's interactive behavior as part of the UPE, including job control and command line editing. Interestingly enough, only vi-style line editing commands have been standardized; emacs editing commands were left out due to objections.
While POSIX.2 includes much of what the shell has traditionally provided, some important things have been omitted as being “beyond its scope”. There is, for instance, no mention of a difference between a login shell and any other interactive shell (since POSIX.2 does not specify a login program). No fixed startup files are defined, either-the standard does not mention .profile.
Since the Bourne shell provides Bash with most of its philosophical underpinnings, Bash inherits most of its features and functionality from sh. Bash implements all of the traditional sh flow control constructs (for, if, while, etc.). All of the Bourne shell builtins, including those not specified in the POSIX.2 standard, appear in Bash. Shell functions, introduced in the SVR2 version of the Bourne shell, are similar to shell scripts, but are defined using a special syntax and are executed in the same process as the calling shell. Bash has shell functions which behave in a fashion upward-compatible with sh functions. There are certain shell variables that Bash interprets in the same way as sh, such as PS1, IFS and PATH. Bash implements essentially the same grammar, parameter and variable expansion semantics, redirection, and quoting as the Bourne shell. Where differences appear between the POSIX.2 standard and traditional sh behavior, Bash follows POSIX.
The Korn Shell (ksh) is a descendent of the Bourne shell written at AT&T Bell Laboratories by David Korn. It provides a number of useful features that POSIX and Bash have adopted. Many of the interactive facilities in POSIX.2 have their roots in the ksh. For example, the POSIX and ksh job control facilities are nearly identical. Bash includes features from the Korn Shell for both interactive use and shell programming.
For programming, Bash provides variables such as RANDOM and REPLY, the typeset builtin, the ability to remove substrings from variables based on patterns, and shell arithmetic.
RANDOM expands to a random number each time it is referenced. Assigning a value to RANDOM seeds the random number generator.
REPLY is the default variable used by the read builtin when no variable names are supplied as arguments.
The typeset builtin is used to define variables and give them attributes such as readonly.
Bash arithmetic allows the evaluation of an expression and the substitution of the result. Shell variables may be used as operands, and the result of an expression may be assigned to a variable. Nearly all of the operators from the C language are available, with the same precedence rules:
$ echo $((3 + 5 * 32)) 163
For interactive use, Bash implements ksh-style aliases and builtins such as fc (discussed below) and jobs. Bash aliases allow a string to be substituted for a command name. They can be used to create a mnemonic for a Unix command name (e.g., alias del=rm), to expand a single word to a complex command (e.g., alias news='xterm -g 80x45 -title trn -e trn -e -S1 -N &), or to ensure that a command is invoked with a basic set of options (e.g., alias ls="/bin/ls -F").
The C shell (csh) was originally written by Bill Joy while at the University of California at Berkeley. It is widely used and quite popular for its interactive facilities. Bash includes a csh-compatible history expansion mechanism (“! history”), brace expansion, access to a stack of directories via the pushd, popd and dirs builtins, and tilde expansion, to generate users' home directories. Tilde expansion has also been adopted by both the Korn Shell and POSIX.2.
There were certain areas in which POSIX.2 felt standardization was necessary, but no existing implementation provided the proper behavior. The working group invented and standardized functionality in these areas, which Bash implements. The command builtin was invented so that shell functions could be written to replace builtins; it makes the capabilities of the builtin available to the function. The reserved word “!” was added to negate the return value of a command or pipeline; it was nearly impossible to express “if not x” cleanly using the sh language.
There exist multiple incompatible implementations of the test builtin, which tests files for type and other attributes and performs arithmetic and string comparisons. POSIX considered none of these correct, so the standard behavior was specified in terms of the number of arguments to the command. POSIX.2 dictates exactly what will happen when four or fewer arguments are given to test, and leaves
the behavior undefined when more arguments are supplied. Bash uses the POSIX.2 algorithm, which was conceived by David Korn.
Special Reports: DevOps
Have projects in development that need help? Have a great development operation in place that can ALWAYS be better? Regardless of where you are in your DevOps process, Linux Journal can help!
With deep focus on Collaborative Development, Continuous Testing and Release & Deployment, we offer here the DEFINITIVE DevOps for Dummies, a mobile Application Development Primer, advice & help from the experts, plus a host of other books, videos, podcasts and more. All free with a quick, one-time registration. Start browsing now...