Linux Installation and Getting Started
Matt released version 1 of this book in August, 1993. Version 2 was just made available on January 14, 1994. The major revision was to make it generic for most any Linux distribution. The previous edition was somewhat specific to the SLS distribution.
The following appears on the cover of the book and is a reasonable explanation of why the book exists and who should read it.
“This book is an installation and new-user guide for the Linux system, meant for UNIX novices and gurus alike. Contained herein is information on how to obtain Linux, installation of the software, a beginning tutorial for new UNIX users, and an introduction to system administration. It is meant to be general enough to be applicable to any distribution of the Linux software. Anyone with interest in installing and running Linux should read this book first.”
The book starts with an introduction to Linux including history, features, design and hardware requirements. The next chapter covers obtaining and installing Linux. How to get Linux from the Internet as well as other sources is covered. The section on installation problems covers many if not most of the questions that are regularly asked on the Linux newsgroups on Usenet.
The third chapter is a Linux tutorial. While not differing much from a standard Unix tutorial it covers the basics that a newcomer to Linux (or Unix) will need to know. It starts very basic but covers pipes, wildcards, file permissions, job control and the vi editor.
Systems administration is covered which includes routine stuff as well as disaster recovery. The final chapter is an introduction to the advanced features of Linux including X Windows, TCP/IP networking, E-mail and Usenet news.
Appendices cover other documentation, linux distributions, a Linux BBS list where you can get Linux files and even a tutorial on using ftp to get Linux off the Internet.
All in all, a thorough job of writing what needs to be said to get people started. If I had to find shortcomings it would be in the appendices talking about other sources of information and Linux distributions. The other books list mentions quite a few of the O'Reilly books (which are Unix-specific) but leave out what I would consider important books such as The UNIX Programming Environment by Kernighan and Pike (Prentice-Hall), The UNIX System by Stephen Bourne (Addison-Wesley), Introducing the UNIX System by Henry McGilton and Rachael Morgan (McGraw-Hill) and SSC's series of Unix pocket references and tutorials. The list of distributions covers MCC, TAMU, Nascent, Slackware and Trans-Ameritech but leave out major players such as Yggdrasil. Also, the information on Slackware is out of date but, as the change only happened 30 days ago, I can't be overly critical.
The final word: well worth the price which, as I mentioned is free if you have Internet access. It can be found on SunSite (sunsite.unc.edu:/pub/Linux/docs/LDP/install-guide) as well as all the other standard mirror sites. It is available as LaTeX source, a dvi file and in PostScript. If you don't have Internet access (or just would rather buy paper) SSC has agreed to make a comb bound copy available for $15 plus shipping ($3 in the U.S.).E-mail sales@ssc.com or call (206)527-3385 for details.
Phil Hughes
Today’s modular x86 servers are compute-centric, designed as a least common denominator to support a wide range of IT workloads. Those generic, virtualized IT workloads have much different resource optimization requirements than hyperscale and cloud applications. They have resulted in a “one size fits all” enterprise IT architecture that is not optimized for a specific set of IT workloads, and especially not emerging hyperscale workloads, such as web applications, big data, and object storage. In this report, you will learn how shifting the focus from traditional compute-centric IT architectures to an innovative disaggregated fabric-based architecture can optimize and scale your data center.
Sponsored by AMD
Built-in forensics, incident response, and security with Red Hat Enterprise Linux 6
Every security policy provides guidance and requirements for ensuring adequate protection of information and data, as well as high-level technical and administrative security requirements for a system in a given environment. Traditionally, providing security for a system focuses on the confidentiality of the information on it. However, protecting the data integrity and system and data availability is just as important. For example, when processing United States intelligence information, there are three attributes that require protection: confidentiality, integrity, and availability.
Learn more about catching the bad guy in this free white paper.
Sponsored by DLT Solutions
| Making Linux and Android Get Along (It's Not as Hard as It Sounds) | May 16, 2013 |
| Drupal Is a Framework: Why Everyone Needs to Understand This | May 15, 2013 |
| Home, My Backup Data Center | May 13, 2013 |
| Non-Linux FOSS: Seashore | May 10, 2013 |
| Trying to Tame the Tablet | May 08, 2013 |
| Dart: a New Web Programming Experience | May 07, 2013 |
- RSS Feeds
- New Products
- Making Linux and Android Get Along (It's Not as Hard as It Sounds)
- Drupal Is a Framework: Why Everyone Needs to Understand This
- Home, My Backup Data Center
- A Topic for Discussion - Open Source Feature-Richness?
- Developer Poll
- Dart: a New Web Programming Experience
- May 2013 Issue of Linux Journal: Raspberry Pi
- What's the tweeting protocol?
Enter to Win an Adafruit Prototyping Pi Plate Kit for Raspberry Pi

It's Raspberry Pi month at Linux Journal. Each week in May, Adafruit will be giving away a Pi-related prize to a lucky, randomly drawn LJ reader. Winners will be announced weekly.
Fill out the fields below to enter to win this week's prize-- a Prototyping Pi Plate Kit for Raspberry Pi.
Congratulations to our winners so far:
- 5-8-13, Pi Starter Pack: Jack Davis
- 5-15-13, Pi Model B 512MB RAM: Patrick Dunn
- Next winner announced on 5-21-13!
Free Webinar: Linux Backup and Recovery
Most companies incorporate backup procedures for critical data, which can be restored quickly if a loss occurs. However, fewer companies are prepared for catastrophic system failures, in which they lose all data, the entire operating system, applications, settings, patches and more, reducing their system(s) to “bare metal.” After all, before data can be restored to a system, there must be a system to restore it to.
In this one hour webinar, learn how to enhance your existing backup strategies for better disaster recovery preparedness using Storix System Backup Administrator (SBAdmin), a highly flexible bare-metal recovery solution for UNIX and Linux systems.




2 hours 23 min ago
3 hours 10 min ago
4 hours 43 min ago
6 hours 20 min ago
8 hours 18 min ago
8 hours 35 min ago
9 hours 5 min ago
9 hours 6 min ago
9 hours 6 min ago
12 hours 7 min ago