LJ 1: Linux and Hams
If you are a ham, let me know and maybe include a short blurb about how/why you got involved in Linux. I think it could be interesting. I will post a summary and might even include the info in an upcoming issue of Linux Journal.
Rather than try to draw any conclusions I have decided to just post what people said. I think hams will find it interesting. Note that in the ham tradition I edited the signatures so they consist of the person's first name and ham call unless they didn't give me a call. Then I include the full name.
Assuming there are no objections (and enough space) I plan to reprint this in the March issue of Linux Journal. I think it helps tie Linux into another community. One who has traditionally been on the leading edge of both technology and spending as little money as possible. :-)
Any hams out there doing “ham stuff” with Linux and want to write an article about it for Linux Journal?
The SLS/slackware distributions have basically given me a UNIX/X workstation at home...wish my 486 was as fast as the Indigo on campus though.
I've been using Linux for over a year on a Gateway. I just now have some time to try hacking on some programs for the radio.
Most of the time I'm on 80/20 meter PACTOR. I almost have a PACSAT station working (still need a preamp and a few other odds-and-ends).
I think Linux would work great for automating satellite uploads and downloads, tracking, etc.-Phil AD4FH
Well, this comes to you from host w4bzl.concert.net at the end of a quite productive SLIP link. Of course this host at home runs linux. AT CONCERT we have at least two other hams that run linux with their calls as their hostname. I'll leave it to them to respond.-Joe W4BZL
I'm a ham too, N5SNN down in Austin, TX. How I got involved? Well that's because our lab has too many junks (or goodies in ham word), that made me just buy a used 486 motherboard and a new 486sx/25 to start a unix-pc using Linux. Why? To replace the NOS-box that I use for ausgw (austin's packet-internet gateway) with a better system.
My linux is now 100% on the Internet (it's under my lab desk at campus), runs gopher server, anon ftp, and uucp-internet gateway (private).-Paulus N5SNN
Add me in there too. BTW, I started using Linux about 6 months before becoming a HAM. Part of the reason for becoming a HAM was the large number of them involved with Linux.-Jim KD4PPG
I am VK4BSB. Packet mail to VK4BSB@VK4ZGQ.BNE.QLD.AUS.OC-Serge VK4BSB
Who, ME? I've been a netnews reader since the Great Renaming. I decided it was time to start working with the `blood & guts' of a Unix.....-David WB8FOZ
I got interested in Linux last year when Algorithm magazine published a quick blurb about the freely distributed Unix clone and how great it was. I wasn't able to start playing with it until this past August when I upgraded my old XT to a 486. Unfortunately, that also corresponded to my starting a PhD program, so I haven't had much time to play with Linux, outside of installing SLS 1.03 and wondering how to patch what doesn't work!-Chris N0OQT
I am: Jim Graham, N5IAL /4. I've been a general-class since `86. I live on Okaloosa Island, in Ft. Walton Beach, FL (NW FL). I started looking at Linux in mid-1992 as part of my (then) ongoing search for a UNIX that would run (read, would actually work) on my 386 at home. I finally got a tape drive, which made the installation much simpler, and a memory upgrade to make Linux happier, and installed 0.99 PL6 very early this year. Needless to say, my search for a UNIX system for my machine has ended.
Oh, I'm also the author of KAMterm, which is a shareware host mode terminal program for Kantronics TNCs. It currently runs only under dos (and some dos emulators, I'm told), but I'm working on porting it over to Linux (don't hold your breath—due to all of the things that are going on right now, and the fact that very few people have contacted me about KAMterm in the last couple of months, I'm not spending a whole lot of time on it at the moment...and the port wouldn't be a quick thing to do even if I were). Of course, there are other issues involved with a Linux port, such as the fact that KAMterm is shareware, not freeware, and so on (I need the KAMterm money to pay bills).-Jim N5IAL/4
I use Linux because I want to run a Unix system at home. I'm one of those `sick' people who like the punishment that Unix systems hurl onto their operators. I hope to working with packet radio, as I am a avid packeteer. I understand that there is a version of NOS out for Linux, but have not found it yet. Know where? I also know KB9CTJ here running it too. Were working together on this. I hate MSDOS too.- Chuck WO9K
I use SunOS 4.1.3 at work and don't particularly fancy DOS or DOS/Windows. Linux is an excellent OS for learning how to admin Unix, as the SLS distribution comes complete with lots of configuration problems. That is the configuration for lots of the programs provided with SLS are incomplete or wrong, but close enough that it is better, and more realistic, than course examples. I will be almost upset if the next distribution has all of the problems fixed, as requested by so many flames, because I would have chosen a fixed version had I the opportunity and not learned nearly as much.
All the applications that I need for home are available on Linux and the VC's are great. 386sx/16 with wait states *really* bogs running X. I am waiting for something in c.o.l.a to brag about an excellent TNC interface prog/doc set before I buy one and learn about the real-ether network.-Alan VE3ALO
FWIW, I'm not a ham, although I am studying to become one next year. At this moment I'm using the CB for packet radio. [Don't panic - Peter is in the Netherlands where apparently you can do anything with CB as long as the radio is type approved.]
At this moment Linux is one of the most promising systems for hams. At this moment several versions of NOS have been ported to Linux, like Wampes and JNOS.
The big advantage is that these versions don't suffer from severe lack of memory like most of the MS-DOS versions. And for the future, Linux will have the AX.25 protocol in the kernel. The normal UNIX socket interface will allow easy program development. It is also rumored that FBB will be ported to Linux when the AX.25 support is built in.-Groetjes, Peter Busser
I am WA8USA. I use LINUX on a laptop I have for work (image and digital signal processing). I went to LINUX because of the large number of public domain programs that are included in distributions (or are easily built) and because the availability of source is helpful in solving problems.-Bob WA8USA
I am a ham (ve3ich) and am active in Linux, but the reasons have little to do with amateur radio. I suspect that the type of person who is interested in amateur radio would likely be interested in Linux: doing something technical that is new and state-of-the-art at a low-cost.
I've used Unix at work for a number of years, and had various microcomputers at home. It was a dream of mine to be able to afford a machine at home that had the hardware and software capabilities of a Unix workstation. Just over a year ago I bought a PC specifically for the purpose of running Linux. I learned more about Unix in the first 3 months of using Linux that in 5 years of experience with commercial Unix workstations. I now find myself wishing that the $10,000 Sun workstation that I use at work had more of the capabilities of the $1,800 Linux PC at home.-Jeff VE3ICH
Well, there's my wife N2VIS (Carolyn Carrock) and me N2RDI... I'm more a Unix admin geek type that got into Amateur Radio than a ham that got into Unix... My wife dared me to take the test at the Trenton Computer Festival after hearing me say I could pass it... If you're looking for writers—I was a Unix instructor for Pyramid Technology and a former newspaper editor and reporter... I'm looking forward to subscribing... and reading every article in LJ. My last project—idasendmail on Linux with pathalias routing. My next project - 99.14 kernel and making a linux SVR4 lookalike with all new scripts and the /sbin directory structure.-Bill N2RDI
My call is KF6VB, I've been a ham since 1970. Ham radio got me into electronics, electronics got me into software, software got me into a nice career . But it all started with ham radio.
I got into Linux about a year ago, around version 95pl7, I think. Linux offered me a way to learn about unix without spending big $$$. Also, it allowed me to upgrade my home UUCP node to a much more powerful environment than what DOS supported.
Four years ago, I got my jollies on the radio, talking to people all over the world. Now propagation is in the toilet, and I get the same jollies with uucp, email, and News.
I've also been a student of the Russian language most of my life, and in the past few years I took two trips to Moscow. The first one was pre-Linux , in 1988. Then I visited radio amateurs. I have pictures of Yours Truly at the operating console of the Moscow Radio Club.
The second trip was last December; no radio buddies this time, just people I met through the email. I took the complete latest SLS distribution with me, and seeded Moscow with Linux! At that time, people there had heard of it, but never seen it. Even while I was there, I could see it seading exponentially: people borrowed my diskettes, copied them and gave them to other people, who copied them....
Right now, I am trying to get the Ka9q networking program running on my 99pl9 system. If I am successful, I will be able to integrate the amateur and landline email worlds at one console. So if I say “mail firstname.lastname@example.org” the system would automatically squirt it out the TNC instead of the phone line. Also, since the Linux box runs 24 hours a day, I would be able to offer routing to my friends, run an on-the-air ftp site, etc, etc....
I too, have noticed the multitudes of hams on the linux groups; what's more, I have seen more and more mention of Linux on the ham groups. In my mind, hams have two main characteristics:
They like to communicate
They like to play with gadgets.
A Linux box is both a powerful communications platform and a really neat gadget! What ham could resist?-Jerry KF6VB
1 more. And soon to be a real US HAM (N5something)--I passed the Tech exam some time ago. : If you are a ham, let me know and maybe include a short blurb : about how/why you got involved in Linux. I think it could be : interesting. I will post a summary and might even include the : info in an upcoming issue of Linux Journal. I am also doing an AX.25/NETROM layer in NET-2.-Fred N. van Kempen
I'm a radio amateur, and a LINUX user. My computer is not (yet) connected to packet radio, but once I get around to buy my own rig, instead of just using the radio club's (SK5EU) gear, it sure will be. Sadly, TCP/IP on packet seems to be virtually unknown here in Sweden..-Ture SM5UUO
Phil, I'm N4HHE and saw your request to hear from Linux Hams in the mail- archive on tsx-11.mit.edu. Don't know what kind of information you are looking for. I use Linux for “recreational computing.” When I work (as an electrical engineer) my choice is Macintosh. Been Unix'ing for over 5 years, usually as the system administrator, and always made sure I had a Macintosh that I could use for login. A couple of years ago I “ran” a 12 machine Silicon Graphics installation from a 512k Mac. Lots of fun.
Currently experimenting with TCP/IP over amateur radio. WAMPES has been running at my home for the last couple of weeks. See some people gripe about the lack of Linux documentation, they need to try WAMPES and really learn about lack of documentation.-David N4HHE
I'm a ham and I have used Linux since May 1992 I think. I just can't remember where I heard of Linux first, but I followed the development of Linux from November 1991 (or maybe December). First by listening to reports by others, from 23. January I started to `finger' Linus' account to get the latest news about the state of Linux. As I said above, in May 1992 (or was it April? Hmm, not easy to remember.. :-) I started to actually use it, after having followed the mailing list for some weeks, enough to feel confident about how to install it and so on. I'm not using Linux for any ham-related stuff, one of the reasons is that I don't have a PC at home (I'm using Linux in my job only).-Tor LA1RHA
N3PFP. I'm essentially inactive, I only bothered to get license because I was planning on trying out packet radio. I passed the written tests up to advanced before I ran out of testing/checking time that day, but I've never done the code tests (and probably couldn't break 10wpm at my peak). ... still looking for a cheap, short-range 56k-1Mbs packet radio setup.-Donald N3PFP
I am a ham, WB4ARV, but I only use linux at work. I at least have been working on it when I have time. I have been pulled to another project and have been unable to work on it for the last couple of months. I also have been working on the depca cards for the ethernet so that has slowed me down alot. If I ever get it working good I think I will try to use it at home. I am not into packet at the moment but I may if I switch to Linux.-Joe WB4ARV
Alright, I'll bite! ;) While in college, I started to dream of having my very own “unix box” to hack on for endless hours. The thought of being able to do this *and* get to participate in the evolution of a new OS was really exciting to me, and remains so to this day, a couple years later!
There is absolutely no doubt in my mind that I have been able to learn *so* much more about unix and PCs in general because of the decision to run Linux on my own computer. I have been able to contribute to portions of the OS in 1992 and early 1993, in the form of initial ports of network clients, a BBS package, and several X Windows games. I also established a free Linux-oriented BBS in late 1992 which continues to flourish and present new learning opportunities.
Ham Radio entered the equation this year, when I decided to once again obtain a license, this time Technician. I operated CW as a novice at the tende r age of nine years - fifth grade, and now enjoy 2 meter rag-chewing, packet radio and *maybe*, CW. Someday. When I get around to it again. ;) A small group of experimenters in the Bay Area are architecting a high speed packet network. It uses 256 Kbps modems designed by a fellow at Stanford, and protocols by a friend (Cliff Skolnick N1DPH) and myself. Mike Cheponis (K3MC) is the mastermind behind the project. A mailing list is set up on my machine (list is called “speed-freaks” - send mail to email@example.com with “help” in the body for info).
It's coming along, albeit slowly, and we're experimenting with some low-speed stuff right now. My Linux system talks to a 286 DOS box (running KA9Q) over ethernet, and from there out onto the local TCP/IP network; the 286 functions as a router, and allows access to network services on my Linux box from the ampr-net. Cliff and I are eagerly awaiting the release of the Linux AX25 drivers to try out and possibly integrate into our network software.
Hope you enjoyed reading this response to your post. I look forward tohearing other Linux-using ham operators' stories as well!-Dave KE6AJC
Actually, the number of technical “netters” in *any* field who are hams is rather amazing.
++Brandon (JNOS Linux port, and if I ever get time I'll finish up some enhancements to XSat that make it almost worth using)
--... ...-- -.. . -.- ..-. ---.. -. .... ...-.-
[in English, 73 de KF8NH—boy is morse code hard to read like that] 73 de KF8NH
Hi. I am also a ham (WQ3S). I recently started running Linux because I wanted a REAL multitasking OS for my computer. I was already familiar with UNIX, so I found Linux to be an ideal choice for my needs.-Andrew WQ3S
I got into Linux because I wanted a real Unix and it was free, and nowadays its free and better. I'm currently running a public access Linux box via AX.25 and WAMPES (much hacked).- Alan Cox
Well, count me in. I've been keen on Unix from the git-go, but it always seemed to be out of my reach for hobby use until Coherent. When Linux reached ~pl12, I jumped in; never looked back.
One of these days RSN, I hope to start using Linux for some ham applications, but that's somewhere down in the queue. OTOH, it seems that I'm having so much fun dinking with Linux that the ham gear is gathering quite a coat of dust.-John N4VU
I am N2VKD, just got my technician's license in June. Have been playing with Linux on my 386/20 for about a year now. Running packet radio here in New York City under Linux is one of the reasons I got my ticket. So, sometime in the coming year, I hope to get the radio gear and tnc that will best work with Linux. I joined AMSAT too, that big bird they are going to send up sounds exciting. Overall, I think Linux and Ham Radio will be great together, with both being the better from the merge.-Jim N2VKD
I've been involved with Linux since 0.12. I work in data networking, and am an active packet radio operator. I am co-administrator of the Sydney amprnet tcp/ip Wormhole gateway. I have a strong interest in computing too, and for me, Linux is ideal, allowing me to meld my radio and computing hobbies into a single series of projects.-Terry VK2KTJ
I am KD4UBM. I am eventually going to have a login: over the air via packet. It'll be a while till I get the money to buy the equipment, but I am setting up my Linux PC for it now.-John KD4UBM
My call is DL4YBG, name is Mark and QTH is Berlin/Germany. It was much fun working on a homebrew CP/M-system, because you could create your own system and built your own hardware. All this fun was gone when using MSDOS... LINUX with its complete sourcecode and kernel-hacking brought back the fun to computing...-Mark DL4YBG
Finally, my turn. I have been a ham for over 30 years and have always been on the experimenter end. Even build a remote base station when I was still in high school. I see Linux as another chance to experiment and hope to get Linux and ham packet plugged in together.-Phil WA6SWR
Practical Task Scheduling Deployment
July 20, 2016 12:00 pm CDT
One of the best things about the UNIX environment (aside from being stable and efficient) is the vast array of software tools available to help you do your job. Traditionally, a UNIX tool does only one thing, but does that one thing very well. For example, grep is very easy to use and can search vast amounts of data quickly. The find tool can find a particular file or files based on all kinds of criteria. It's pretty easy to string these tools together to build even more powerful tools, such as a tool that finds all of the .log files in the /home directory and searches each one for a particular entry. This erector-set mentality allows UNIX system administrators to seem to always have the right tool for the job.
Cron traditionally has been considered another such a tool for job scheduling, but is it enough? This webinar considers that very question. The first part builds on a previous Geek Guide, Beyond Cron, and briefly describes how to know when it might be time to consider upgrading your job scheduling infrastructure. The second part presents an actual planning and implementation framework.
Join Linux Journal's Mike Diehl and Pat Cameron of Help Systems.
Free to Linux Journal readers.Register Now!
- Murat Yener and Onur Dundar's Expert Android Studio (Wrox)
- SUSE LLC's SUSE Manager
- My +1 Sword of Productivity
- Tech Tip: Really Simple HTTP Server with Python
- Non-Linux FOSS: Caffeine!
- Managing Linux Using Puppet
- Google's SwiftShader Released
- Parsing an RSS News Feed with a Bash Script
- Doing for User Space What We Did for Kernel Space
- SuperTuxKart 0.9.2 Released
With all the industry talk about the benefits of Linux on Power and all the performance advantages offered by its open architecture, you may be considering a move in that direction. If you are thinking about analytics, big data and cloud computing, you would be right to evaluate Power. The idea of using commodity x86 hardware and replacing it every three years is an outdated cost model. It doesn’t consider the total cost of ownership, and it doesn’t consider the advantage of real processing power, high-availability and multithreading like a demon.
This ebook takes a look at some of the practical applications of the Linux on Power platform and ways you might bring all the performance power of this open architecture to bear for your organization. There are no smoke and mirrors here—just hard, cold, empirical evidence provided by independent sources. I also consider some innovative ways Linux on Power will be used in the future.Get the Guide