Best of Technical Support
I've been spoiled by operating systems that use “ballistic mouse” control (a fast motion of the mouse moves the mouse a lot while a slow motion moves the mouse very little). I'm using Metro-X but seem to recall the same limitation with XFree.
Is there a patch or parameter available which will enable a mouse to respond to the speed of the mouse movement? I'm running at a fairly high resolution and I have to pick my mouse up two or three times to move the cursor from one side of the screen to the other. —Mike Hall
You can do this using the m option of the xset command. This command lets you set parameters for both acceleration and a threshold for the number of pixels the mouse must travel before it accelerates. Check out the xset man page. —Samuel Ockman & Larry Augustin, VA Research firstname.lastname@example.org and email@example.com
I have Red Hat 4.2, and I have noticed something strange at the root “/” directory. I have a file named “..”. This is in addition to the normal directories “.” and “..”. How do I delete a —Kevbo
The file cannot truly be called “..” because the “..” directory is present. Its name is probably “.. ” (with a trailing space) or something similar. The problem here is finding the name of the file so you'll be able to remove it. Try typing the command ls -l > listfile and then look in listfile with a binary capable editor like Emacs, or use the “set list” command in vi to show the end of line, and trailing blanks will be revealed. Then, using double quotes or wildcard characters (expressions like “..?”), you'll be able to identify the file on the command line and remove it.
Other files that are often hard to remove are those beginning with a minus sign. (For example a file named “-test”). To remove these files just use a relative pathname, e.g., —Alessandro Rubini firstname.lastname@example.org
I can't install Red Hat 4.0 on my system. I have a mainboard with a P200 MMX and USB support. When I try to autoboot from a CD-ROM the system starts loading Linux but then suddenly reboots with error messages like “Unknown PCI-device”. I can only install Slackware from a boot disk when I press PAUSE a few times while loading the image. What can I do about this? —Mario Vos Red Hat 2.0.0
Most likely the kernel you are trying to boot can't deal with your PCI controller. Sometimes, though, a system prints what appears to be an error message but works anyway. Make sure you aren't just seeing what you think are errors and not giving it a chance to work.
If there truly are errors the best thing to do is to try a more recent version of Red Hat (4.2 currently). —Donnie Barnes, Red Hat Software email@example.com
Can Linux support native IP multicasting over PPP? If so, what version(s) must I use and what are the configuration requirements? —Don Skillen Caldera 2.0.29
Make sure your kernel has been compiled with these options:
IP: multicast routing (experimental)
You should also check out the web page http://www.teksouth.com/linux/multicast/. It is a great resource for information on Linux multicasting. —Mark Bishop firstname.lastname@example.org
I have two machines connected via 10Base coaxial cable. One is running Linux Slackware 2.0.30 and the other is running Windows 95. I've configured Sendmail on my Linux machine. I use a Netscape mailer on the Win95 machine. When I send mail between the two machines Sendmail takes a very long time to send the mail even though it's just a test mail. The mail coming from Netscape to the Linux box is turbo fast. —Ronneil Camara Slackware 3.3
Your machine is most likely trying to do a reverse DNS lookup to determine the host name of the machine from which you are connecting. The delay you are experiencing is the time waiting for the DNS response. On the Linux box, run the “host” command with the IP number of your Windows 95 machine. It should return the name of the Windows 95 machine. If it doesn't, your name server setup is not correct.
If you don't have an external name server (provided by your ISP), and don't want to create your own, make sure that the daemon named is not running on your Linux machine; confirm this by typing:
ps ax | egrep -i named
Next add an entry for the Windows machine to the /etc/hosts file.
If you are running named, check its setup. You should run reverse DNS to map IP numbers to host names. The Network Administrator's Guide by Olaf Kirch is freely available and is a good guide to setting up a name server.
If your Internet service provider is providing the name server, make sure your /etc/resolv.conf file correctly points to your ISP's name server, and talk to your ISP to make sure they are correctly providing reverse DNS. —Larry Augustin, VA Research email@example.com
|Huge Package Overhaul for Debian and Ubuntu||Jul 23, 2015|
|diff -u: What's New in Kernel Development||Jul 22, 2015|
|Shashlik - a Tasty New Android Simulator||Jul 21, 2015|
|Embed Linux in Monitoring and Control Systems||Jul 20, 2015|
|The Controversy Behind Canonical's Intellectual Property Policy||Jul 17, 2015|
|Non-Linux FOSS: Portable Apps, in the Cloud!||Jul 15, 2015|
- Huge Package Overhaul for Debian and Ubuntu
- Shashlik - a Tasty New Android Simulator
- diff -u: What's New in Kernel Development
- The Controversy Behind Canonical's Intellectual Property Policy
- Home Automation with Raspberry Pi
- Embed Linux in Monitoring and Control Systems
- Purism Librem 13 Review
- One Port to Rule Them All!
- Privacy Is Personal
- General Relativity in Python