In this article, we will explain the intentions and goals of the Linux-GGI Project along with the basic concepts used by the GGI programmers to allow fast, easy to use access to graphical services, hide hardware level issues from applications and introduce extensible support for multiple displays under Linux. The Linux-GGI project wants to set up a General Graphical Interface for Linux that will allow easy use of graphical hardware and input facilities under the Linux OS. Already existing solutions and standards like X or OpenGL do deal with graphic's issues, but these current implementations under Linux have several (sometimes serious) drawbacks:
Console switching is not deadlock-free, because the kernel asks a user-mode application to permit the switch causing a problem in terms of security. Since any user-mode application can lock the console, the kernel has to rely on the application to allow a user-invoked switch. For stand-alone machines, if the console locks in an application without a switch, a system reboot will have to be done.
The Secure Attention Key (SAK), which kills all processes associated to the current virtual console might help with the above problem, but for graphics applications the machine might still remain locked, because the kernel has no way to do a proper reset of the console—after all, it has no idea which video hardware is present.
Any application accessing graphical hardware at a low level has to be trusted as it needs to be run by root to gain access to the graphical hardware. The kernel relies on the application to restore the hardware state when a console switch is initiated. Relying on the application might be okay for an X server that needs superuser rights for other reasons, but most of us would not want to trust a game that is available to us only in binary form.
Input hardware (such as a mouse or a joystick) can be accessed using the current approach, but it can't easily be shared between several virtual consoles and the applications using it.
No clean way is available to use more than one keyboard and monitor combination. You might think that this is not possible on PC hardware anyway; but in fact, with currently existing hardware there are ways to have multi-headed PCs, and the USB peripheral bus to be introduced soon may allow for multiple keyboards, etc. Besides, other architectures do support multiple displays, and if Linux did also, it would be a good reason to use Linux for applications like CAD/CAE technology.
Games cannot use the existing hardware at maximum performance, because they either have to use X, which introduces a big overhead (from a game programmer's point of view), and/or access the hardware directly, which requires separate drivers for every type of hardware they run on.
GGI addresses all these points and several more in a clean and extensible way. (GGI does not wish to be a substitute for these existing standards nor does it want to implement its graphical services completely inside the kernel.) Now, let's have a look at the concepts of GGI—some of which have already been implemented and have shown their usability.
The GGI hardware driver consists of a kernel space module called Kernel Graphical Interface (KGI) and a user space library called libGGI. The KGI part of GGI will consist of a display manager that takes care of accessing multiple video cards and does MMU-supported page flipping on older hardware. This method allows for incredibly fast access to the frame buffer from user space whenever possible. (This technique has already been proven—the GO32 graphics library for DJPGG, the GNU-C-compiler for DOS, uses this method and has astonishingly fast graphical support on older hardware.) If this memory-mapped access method can be used in GGI, there will be no loss in performance as the application reads or writes the pixel buffer directly.
Each type of video card in the system has its own driver, a simple loadable module that registers as many displays as the card can address. (Video cards exist that support two monitors or a monitor and a TV screen.) The driver module gives the system the information needed to access the frame buffer and to access special accelerated features, the setup of a certain video mode and the limits of the hardware (e.g., the graphic card, the monitor, and any other part of the display system). The module can either be obtained from a single source file or be linked using precompiled subdrivers for each graphical hardware subsystem (ramdac, monitor, clock chip, chipset, accelerator engine). This last option is the favourite approach, since it allows support for new cards to be added quite easily, as only the subdrivers for hardware not already supported need to be implemented and tested. (The others are already in use or bug fixes there will improve all drivers using them.) This scheme has been used to derive support for many of the S3 accelerator-based cards, and has proved to be very efficient and easy to use. It also allows for efficient simultaneous development for several graphic cards. The subdrivers to be linked together are now selected at configuration time, but they can also be selected after automatic detection or according to a database (not yet built). Note that the subdrivers do not need to be in source form; as a result, precompiled subdriver object files can be linked together during installation.
As each subdriver knows the hardware exactly, it can prevent the display hardware from being damaged due to a bad configuration and make suggestions about the optimal use of the hardware. For example, the current implementation has drivers for fixed- and multisync monitors that allow optimal timings for any resolution to be calculated on the fly without any further configuration. Of course, completely user- configurable drivers are also possible. In short, in addition to the hardware level code, the subsystem drivers provide as much information about the hardware as possible. This way the kernel will have sufficient methods to initialize the card, to reset consoles and video modes when an application gets terminated, and to make optimal use of the hardware. The KGI manager will allow a single kernel image to support GGI on all hardware, as any hardware-specific code is in the loadable module and only common services (such as memory mapping code) are provided from the kernel. The KGI manager will also provide data structures and support to almost any imaginable kind of input devices.
The user space library, called libGGI, will implement an abstract programming interface to applications. It interfaces to the kernel part using special device files and standard file operations. Applications should use this interface (or APIs provided by applications based on it) to gain maximum performance; however, other APIs can be built accessing the special files directly. Understand that in this case the X server will just be a normal application in terms of graphic access. Since X is considered to be the main customer for graphical services, the API will be designed according to the X protocol definition and will implement a set of low level drawing routines required by X servers. The library will use accelerated functions whenever possible and emulate features not efficiently supported by the hardware found. An important feature of future generation graphical hardware is 3D acceleration which easily fits into the GGI point of view. We plan to provide support for 3D features based on MESA, which is close to OpenGL and ensures compatibility with other platforms than Linux.
Another issue when dealing with graphics is game programming as games need the highest possible performance. They also need special support by the video hardware to produce flicker-free animation or realistic images. The current approaches can't support this need in a reasonable way, since they cannot get help from the kernel (e.g., to use retrace interrupts). GGI can provide this support easily and give maximum hardware support to all applications.
One Click, Universal Protection: Implementing Centralized Security Policies on Linux Systems
Join editor Bill Childers and Bit9's Paul Riegle on April 27 at 12pm Central to learn how to keep your Linux systems secure.
Free to Linux Journal readers.Register Now!
|diff -u: What's New in Kernel Development||Aug 20, 2014|
|Security Hardening with Ansible||Aug 18, 2014|
|Monitoring Android Traffic with Wireshark||Aug 14, 2014|
|IndieBox: for Gamers Who Miss Boxes!||Aug 13, 2014|
|Non-Linux FOSS: a Virtualized Cisco Infrastructure?||Aug 11, 2014|
|Linux Security Threats on the Rise||Aug 08, 2014|
- diff -u: What's New in Kernel Development
- NSA: Linux Journal is an "extremist forum" and its readers get flagged for extra surveillance
- Security Hardening with Ansible
- Tech Tip: Really Simple HTTP Server with Python
- New Products
- Monitoring Android Traffic with Wireshark
- Returning Values from Bash Functions
- [<Megashare>] Watch Mrs Brown's Boys Movie Online Full Movie HD 2014
- Cooking with Linux - Serious Cool, Sysadmin Style!
- RSS Feeds